135080
23
Verklein
Vergroot
Pagina terug
1/39
Pagina verder
Automatic controlled recording from
a satellite receiver (RECORD LINK)
This function automatically starts recording on the switched-off
video recorder when a video signal is recognised through the
connected scart cable. If your satellite receiver has a
programming function, the recording will start automatically (as
long as the satellite receiver is switched on).
1 Switch on the TV set. If required, select the programme
number for the video recorder.
2 Press
MENU on the remote control. The main menu will
appear.
3 Select line 'SPECIAL SETTINGS' using
P- = or
;P+ and confirm with OK .
SPECIAL SETTINGS
OSD è ON p
CLOCK DISPLAY OFF
RECORD LINK OFF
REPEAT PLAY OFF
DIRECT RECORD OFF
________________________________
EXITpMENU STOREpOK
4 Select line 'RECORD LINK' using P- = or ;P+ .
5 Select function 'ON' with
Q or P .
Switching off 'Record Link'
To switch off the function, select 'OFF'.
6 Confirm with
OK .
7 To end, press
MENU .
8 Insert a cassette.
9 Use a scart cable to connect scart socket
EXT.2 AV. 2
on the video recorder to the corresponding scart socket
on the satellite receiver.
0 Programme the satellite receiver with the required
information (programme number of the TV channel, start
time, end time).
If necessary, please see the operating instructions for
your satellite receiver.
A Switch off the video recorder with
STANDBY m .
The video recorder is now ready to record. The beginning and
end of the recording is controlled via scart socket
EXT.2 AV. 2 .
When this function is switched on, '
x' will appear on the video
recorder display.
'Direct Record'
Can you record the right TV channel in seconds when the
video recorder is switched off? No problem. If recording is
started manually, the switched-off video recorder uses the
current TV channel setted on the TV set.
'Easy Link' is used to transfer the TV channel for video
recorders that are switched on and off.
You will find more information on how to switch 'Direct record'
on or off in the next section 'Direct record'.
How does Direct Record work?
The video recorder compares the TV channel selected on
the TV set with its stored TV channels via the scart cable. If
the same TV channel is found, it switches the video recorder
to the corresponding programme number and starts
recording.
Please do not change the TV channel on the TV set during
the search so as not to affect the process.
1 On the TV set, select the programme number you want
make the recording from.
2 Press
REC/OTR n and A at the same time with the
video recorder switched off.
A 'search symbol' appears in the display (a moving
symbol)
* The video recorder is comparing its saved TV channels
with those of the TV set. Please do not change the TV
channel on the TV set as long as the 'search symbol' (a
moving symbol) is being displayed.
'NOTV' appears in the display
* This TV channel could not be found in the video recorder's
memory.
Check that all TV channels saved on the TV set are
available in the video recorder. If required, save any missing
channels. Please read the section 'Manual TV channel
search'.
3 Stop recording with
h .
20
23

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Hitachi vt fx 140 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Hitachi vt fx 140 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,76 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Hitachi vt fx 140

Hitachi vt fx 140 Gebruiksaanwijzing - Nederlands - 36 pagina's

Hitachi vt fx 140 Gebruiksaanwijzing - Deutsch - 37 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info