160236
10
Verklein
Vergroot
Pagina terug
1/18
Pagina verder
DAB RESET
When you move the radio to another part of the country, your pre-tuned and stored DAB stations may no
longer be available. If this is the case then you will need to reset your radio back to its original factory
settings; to perform a DAB reset, please do the following:
1.
Press the DAB/FM button to select DAB mode.
2. Press the MENU button once to enter into the “Setup menu”, then rotate the JOG MODE/SELECT
control for selection.
3. When the display shows the “DAB Reset”, press the JOG MODE/SELECT control once, the display will
show “Press
SELECT to confirm reset …”.(F10)(F11)
4. Press the JOG MODE/SELECT control again to confirm, the display will show “Scanning …” and it will
perform DAB full scan function.
5. After the scan has finished, the radio will select and display the first alphanumerically found station.
Note: All
of your stored DAB presets will be lost once the reset has taken place.
Storing and recalling stored preset stations
In either DAB or FM mode, you can store up to 20 stations to the favourite presets; this will enable you to
get direct access to your favourite stations.
1. To store a preset, first tune to your desired station, then press the PROGRAM button once, the display
will
show “PRESET#” and flash.(F8)
2. Press the PS + or PS - button to select your desired station preset number, then press the PROGRAM
button to confirm your selection; the display will show “Preset # saved” in DA B mode.(F9)
3. To recall a preset station, press the
PS + or PS - button to select the stations that you have stored; the
display will show “Preset # loaded” in DAB mode.
4. If you press a preset that hasn’t been allocated a station; In DAB mode, the display will show “Preset
# free”.
Note: The stored
stations will be saved into its memory and power off will not erase it. Storing a
new station into a preset location will erase the previously stored station in that location.
UK-9
F9
F8
F10
F11
1. To select FM, press the DAB /FM button, the display will show FM and the frequency.
2. To activate frequency auto search, press and hold the or button until it starts to scan down or up
the frequency band; it will stop automatically
once a station has been found.
3. To activate manual search, press the JOG MODE/SELECT control once, when Tuning →” appears
in the display, rotate the JOG MODE/SELECT control until you read the correct frequency or the
reception is at its best.
4. You can also
press the or button on the remote control to select your desired frequency.
5. Press the MENU button to toggle select between the FM “STEREO” and “MONO” reception.
FM mode
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Hitachi axm898e bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Hitachi axm898e in de taal/talen: Engels als bijlage per email.

De handleiding is 0,88 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info