571421
15
Verklein
Vergroot
Pagina terug
1/112
Pagina verder
14
English
Measuring area (Fig. 11)
If you measure the length and the width, the area is automatically
calculated.
1
Select area mode. (See “Selecting a measuring mode”)
2
Measure the length.
Press the measure button and aim the laser at the target
length.
Press the measure button again to nish measuring. A beep
sounds and the length measurement is indicated on the
display. The laser does not go o at this time.
3
Measure the width.
Press the measure button and aim the laser at the target width.
Press the measure button again to nish measuring. A beep
sounds and the width measurement and calculated area are
indicated on the display.
Display Content
Before measuring ----- m
2
----- m
After measuring
length
3.083 m
3.083 m
Length measurement
Length measurement
After measuring
width
6.289 m
2
2.040 m
Area calculation result
Width measurement
Measuring volume (Fig. 12)
If you measure the length, width and height, the volume is automatically
calculated.
1
Select volume mode. (See “Selecting a measuring mode”)
2
Measure the length.
Follow the instructions for measuring the length in area mode.
3
Measure the width.
Follow the instructions for measuring the width in area mode.
4
Measure the height.
Press the measure button and aim the laser at the target
height.
Press the measure button again to nish measuring. A beep
sounds and the height measurement and calculated volume
are indicated on the display.
Display Content
Before ----- m
3
----- m
After measuring
length
3.083 m
3.083 m
Length measurement
Length measurement
After measuring
width
6.289 m
2
2.040 m
Area calculation result
Width measurement
After measuring
height
5.333 m
3
0.848 m
Volume calculation
result
Height measurement
Measuring sides (Pythagorean theorem)
If you measure the two sides of a right triangle, the length of the third
side is calculated automatically.
Use this mode when you cannot measure the distance because there is
an obstacle or there is no elevated target surface.
To obtain side C (Fig. 13)
1
Select side mode. (See “Selecting a measuring mode”)
2
Measure the length of side A.
Follow the instructions for measuring the length in area mode and
measure side A.
3
Measure side B.
Follow the instructions for measuring the length of side A and
measure the length of side B.
When you have nished measuring, a beep sounds and the
measured length of side B and calculated result of side C are
indicated on the display.
000Book_UG50Y_WE.indb 14000Book_UG50Y_WE.indb 14 2009/08/20 13:48:092009/08/20 13:48:09
15

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Hitachi UG50Y bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Hitachi UG50Y in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans als bijlage per email.

De handleiding is 2,5 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info