568872
8
Verklein
Vergroot
Pagina terug
1/50
Pagina verder
7
English
work area, moving tool to another location, or after
use. It is very dangerous for a nail to be fired by
mistake.
24. When removing a nail which has become stuck, make
sure to first of all disconnect the hose and release
compressed air.
When removing a nail which has become stuck in the
nail outlet, first of all make sure to disconnect the
hose and release compressed air inside the power
tool.
Accidental firing of the nail could be very dangerous.
25. A female plug (air socket) should not be used in the
body.
If a female plug is installed in the body, the
compressed air sometimes can not be drawn when
the hose is disconnected so avoid this.
The tool and air supply hose must have a hose
coupling such that all pressure is removed from the
tool when the coupling joint is disconnected.
26. Use only genuine HITACHI heat treated nails for
HITACHI NR50AK.
Use only genuine HITACHI heat treated nails of 4.0 ×
40 mm (.157 × 1-9/16") and 4.0 × 50 mm (.157 × 2") for
HITACHI NR50AK to avoid serious injury from
ricocheting nails.
NAIL SELECTION
The use of any other nails and non-heat treated nails
could result in dangerous tool malfunction and/or
nail malfunction, causing serious injury.
27. Only for installation purpose of pre-punched holed
metal connector to wood stud.
28. Before each firing, be sure to position and insert the
first nail point through the metal hole.
This tool and nails are designed for metal connector
with pre-punched holes.
Drive nails into work surface only; never into materials
too hard to penetrate.
If the nail is not positioned and insert properly, it
could ricochet and hurt yourself or someone.
If you are not sure to position and insert the nail
through the metal hole, never drive nails.
Never drive nails into metal. Only drive into pre-
punched metal holes.
29. Always point first nail protruded from nose away
from yourself and others.
Keep your face, hands, feet and other body parts, as
well as those of other persons away from the nose
muzzle to avoid possible injury during use and
carrying.
SPECIFICATIONS
CAUTIONS
Use only genuine HITACHI heat treated nails for this NR50AK to avoid serious injury from ricocheting nails. The
use of any other nails and non-heat treated nails could result in dangerous tool malfunction and/or nail
malfunction, causing serious injury.
Select adequate nail size to meet proper metal hardware requirement needed for application, designed by metal
hardware manufacturer and regulated by the applicable building code.
Only nails shown in the Table below can be driven with this Nailer.
Type of power Piston reciprocating
Air pressure (Gauge) 4.9 – 8.3 bar (70 – 120 psi.)
Applicable nails ref. Fig.
Numbers of loadable nails 25 nails (1 strip)
Size 342 mm (L) × 333 mm (H) × 85 mm (W) (13-15/32” × 13-1/8” × 3–11/32”)
Weight 2.4 kg (5.3 lbs)
Nail-feeding method Spiral spring type
Hose (inside dia.) 8 mm (5/16”)
Dimensions of nails
Plastic-collated strip nails
Full-head nails
8.1 mm
(.319")
40 mm (1-9/16")
8.1 mm
(.319")
50 mm (2")
4.0 mm
(.157")
4.0 mm
(.157")
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Hitachi NR50AK bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Hitachi NR50AK in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 5,13 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info