511991
1
Verklein
Vergroot
Pagina terug
1/33
Pagina verder
H 90SE
Demolition Hammer
Hammer
Marteau de demolition
Demolitore
Hakhamer
Martillo
Handling instructions
Bedienungsanleitung
Mode d’emploi
Istruzioni per l’uso
Gebruiksaanwijzing
Instrucciones de manejo
510
Code No. C99099375 N
Printed in Japan
Read through carefully and understand these instructions before use.
Diese Anleitung vor Benutzung des Werkzeugs sorgfältig durchlesen und verstehen.
Lire soigneusement et bien assimiler ces instructions avant usage.
Prima dell’uso leggere attentamente e comprendere queste istruzioni.
Deze gebruiksaanwijzing s.v.p. voor gebruik zorgvuldig doorlezen.
Leer cuidadosamente y comprender estas instrucciones antes del uso.
Hitachi Koki Co., Ltd.
English
EC DECLARATION OF CONFORMITY
We declare under our sole responsibility that this product is in
conformity with standards or standardized documents EN60745,
EN55014 and EN61000-3 in accordance with Council Directives 73/23/
EEC, 89/336/EEC, 98/37/EC and 2000/14/EC.
2000/14/EC
Type of equipment: Hand-held concrete breaker
Type name: H90SE
Weight of equipment: 35 kg
Conformity assessment procedure: Annex VI, Paragraph 5
European Notified Body: CE 0032 TÜV NORD CERT
Am TÜV 1, 30519 Hannover, Germany
EC-Certificate-Number: CE 0032 - 333 05 009 6 001
Measured sound power level: 105 dB / 1pW
Guaranteed sound power level: 108 dB / 1pW
This declaration is applicable to the product affixed CE marking.
Deutsch
ERKLÄRUNG ZUR KONFORMITÄT MIT CE-REGELN
Wir erklären mit alleiniger Verantwortung, daß dieses Produkt den
Standards oder standardisierten Dokumenten EN60745, EN55014 und
EN61000-3 in Übereinstimmung mit den Direktiven des Europarats
73/23/EWG, 89/336/EWG, 98/37/CE und 2000/14/CE entspricht.
2000/14/CE
Art der Ausrüstung: Handgehaltener Betonbrecher
Typname: H90SE
Gewicht der Ausrüstung: 35 kg
Übereinstimmungsbeurteilungsverfahren: Annex VI Paragraph 5
Europäische benannte Stelle: CE0032 TÜV NORD CERT Am TÜV 1,
30519 Hannover, Deutschland
EU-Zertifikatnummer: CE 0032 - 333 05 009 6 001
Gemessener Schallleistungspegel: 105 dB / 1pW
Garantierter Schallleistungspegel: 108 dB / 1pW
Diese Erklärung gilt für Produkte, die die CE-Markierung tragen.
Français
DECLARATION DE CONFORMITE CE
Nous déclarons sous notre seule et entière respon-sabilité que ce
produit est conforme aux normes ou documents normalisés EN60745,
EN55014 et EN61000-3 en accord avec les Directives 73/23/CEE, 89/
336/CEE, 98/37/CE et 2000/14/CE du Conseil.
2000/14/CE
Type de matériel : Outil de démolition à main
Nom du type : H90SE
Poids du matériel : 35 kg
Procédure d’évaluation de conformité : Annexe VI Paragraphe 5
Organisme européen notifié : CE0032 TÜV NORD CERT Am TÜV 1,
30519 Hanovre, Allemagne
Numéro de certificat UE: CE 0032 - 333 05 009 6 001
Niveau de puissance sonore mesuré : 105 dB / 1pW
Niveau de puissance sonore garanti : 108 dB / 1pW
Cette déclaration s’applique aux produits désignés CE.
Italiano
DICHIARAZIONE DI CONFORMITÀ CE
Si dichiara sotto nostra responsabilità che questo prodotto è conforme
agli standard o ai documenti standardizzati EN60745, EN55014 e
EN61000-3 conforme alle direttive 73/23/CEE, 89/336/CEE, 98/37/CE e
2000/14/CE del concilio.
2000/14/CE
Tipo di apparecchiatura: Demolitore per cemento portatile
Nome di tipo: H90SE
Peso dell'apparecchiatura: 35 kg
Procedimento di valutazione conformità: Allegato VI Paragrafo 5
Ente di Notifica Europeo: CE0032 TÜV NORD CERT Am TÜV 1,30519
Hannover, Germania
CE-Certificato-Numero: CE 0032 - 333 05 009 6 001
Livello di potenza sonora misurato: 105 dB / 1pW
Livello di potenza sonora garantito: 108 dB / 1pW
Questa dichiarazione è applicabile ai prodotti cui sono applicati i marchi CE.
Nederlands
EC VERKLARING VAN CONFORMITEIT
Wij verklaren onder eigen verantwoordelijkheid dat dit produkt conform
de richtlijnen of gestandardiseerde documenten EN60745, EN55014
en EN61000-3 voldoet aan de eisen van EEG Bepalingen 73/23/EEG,
89/336/EEG, 98/37/EC en 2000/14/EC.
2000/14/EC
Type gereedschap: Handbetonbreekhamer
Typenaam: H90SE
Gewicht gereedschap: 35 kg
Conformiteit vaststellingsprocedure: Annex VI Paragraaf 5
In kennis gesteld Europees instituut: CE0032 TÜV NORD CERT
Am TÜV 1, 30519 Hannover, Duitsland
EU-Certificaat-Nummer: CE 0032 - 333 05 009 6 001
Gemeten geluidsdruk: 105 dB / 1pW
Gegarandeerde geluidsdruk: 108 dB / 1pW
Deze verklaring is van toepassing op produkten voorzien van de CE-markeringen.
Español
DECLARACIÓN DE CONFORMIDAD DE LA CE
Declaramos bajo nuestra única responsabilidad que este producto está
de acuerdo con las normas o con los documentos de normalización
EN60745, EN55014 y EN61000-3, según indican las Directrices del
Consejo 73/23/CEE, 89/336/CEE, 98/37/CE y 2000/14/CE.
2000/14/CE
Tipo de dispositivo: martillo manual para romper el hormigón
Nombre del modelo: H90SE
Peso del dispositivo: 35 kg
Procedimiento de evaluación de conformidad: Anexo VI Párrafo 5
Entidad europea notificada: CE0032 TÜV NORD CERT Am TÜV
1,30519 Hannover, Alemania
Nº de certificado de la CE: CE 0032 - 333 05 009 6 001
Nivel de potencia acústica medida: 105 dB / 1pW
Nivel de potencia acústica garantizada: 108 dB / 1pW
Esta declaración se aplica a los productos con marcas de la CE.
Representative office in Europe
Hitachi Power Tools Europe GmbH
Siemensring 34, 47877 Willich 1, F. R. Germany
Head office in Japan
Hitachi Koki Co., Ltd.
Shinagawa Intercity Tower A, 15-1, Konan 2-chome,
Minato-ku, Tokyo, Japan
31. 10. 2005
K. Kato
Board Director
2
12
34
1
31
English Deutsch Français
Tool shank Werkzeugschaft Queue d’outil
Retainer Rückhalter Tige de retenue
Front cover Frontdeckel Couvercle frontal
Recessed portion Ausgesparter Teil Section rentrée
Wear limit Verschleißgrenze Limite d’usure
No. of Carbon brush Nr. der kohlebürste No. de balai en carbone
Cap cover Kappendeckel Couvercle
Hexagon socket hd. bolt Sechskantsteckfassung für
Boulon hexagonal M4 × 10
M4 × 10 Bolzen M4 × 10
1
2
3
4
5
6
7
8
Italiano Nederlands Español
Gambo dell’utensile Boorschacht Barrena
Sostegno Houder Retén
Coperchio anteriore Voorzijde Cubierta delantera
Parte repressa Het verlaagde gedeelte Parte hendida
Limite d’usura Slijtage-limiet Límite de desgaste
Numero delle spazzole di carbone Nr. van koolborstel No. de contacto de carbón
Copri-tappo Kap-afdekking Cubierta de la tapa
Bullone a teste easgonale Bout met zeskantige kop Perno de cabeza hexagonal
M4 × 10 M4 × 10 M4 × 10
A
1
3
2
4
1
3
2
A
B
1
2
3
4
5
6
7
8
7mm
86
17mm
5
6
5
6
7
8
English
Only for EU countries
Do not dispose of electric tools together with
household waste material!
In observance of European Directive 2002/96/EC
on waste electrical and electronic equipment and
its implementation in accordance with national
law, electric tools that have reached the end of
their life must be collected separately and returned
to an environmentally compatible recycling
facility.
Deutsch
Nur für EU-Länder
Werfen Sie Elektrowerkzeuge nicht in den
Hausmüll!
Gemäss Europäischer Richtlinie 2002/96/EG über
Elektro- und Elektronik- Altgeräte und Umsetzung
in nationales Recht müssen verbrauchte
Elektrowerkzeuge getrennt gesammelt und einer
umweltgerechten Wiederververtung zugeführt
werden.
Français
Pour les pays européens uniquement
Ne pas jeter les appareils électriques dans les
ordures ménagères!
Conformément à la directive européenne 2002/96/
EG relative aux déchets d’équipements électriques
ou électroniques (DEEE), et à sa transposition dans
la législation nationale, les appareils électriques
doivent être collectés à part et être soumis à un
recyclage respectueux de l’environnement.
Italiano
Solo per Paesi UE
Non gettare le apparecchiature elettriche tra i rifiuti
domestici.
Secondo la Direttiva Europea 2002/96/CE sui rifiuti
di apparecchiature elettriche ed elettroniche e la
sua attuazione in conformità alle norme nazionali,
le apparecchiature elettriche esauste devono
essere raccolte separatamente, al fine di essere
reimpiegate in modo eco-compatibile.
Nederlands
Alleen voor EU-landen
Geef elektrisch gereedschap niet met het huisvuil
mee!
Volgens de Europese richtlijn 2002/96/EG inzake
oude elektrische en elektronische apparaten en de
toepassing daarvan binnen de nationale
wetgeving, dient gebruikt elektrisch gereedschap
gescheiden te worden ingezameld en te worden
afgevoerd naar een recycle bedrijf dat voldoet aan
de geldende milieu-eisen.
Español
Sólo para países de la Unión Europea
¡No deseche los aparatos eléctricos junto con los
residuos domésticos!
De conformidad con la Directiva Europea 2002/96/
CE sobre residuos de aparatos eléctricos y
electrónicos y su aplicación de acuerdo con la
legislación nacional, las herramientas eléctricas
cuya vida útil haya llegado a su fin se deberán
recoger por separado y trasladar a una planta de
reciclaje que cumpla con las exigencias
ecológicas.
2
12
34
1
31
English Deutsch Français
Tool shank Werkzeugschaft Queue d’outil
Retainer Rückhalter Tige de retenue
Front cover Frontdeckel Couvercle frontal
Recessed portion Ausgesparter Teil Section rentrée
Wear limit Verschleißgrenze Limite d’usure
No. of Carbon brush Nr. der kohlebürste No. de balai en carbone
Cap cover Kappendeckel Couvercle
Hexagon socket hd. bolt Sechskantsteckfassung für
Boulon hexagonal M4 × 10
M4 × 10 Bolzen M4 × 10
1
2
3
4
5
6
7
8
Italiano Nederlands Español
Gambo dell’utensile Boorschacht Barrena
Sostegno Houder Retén
Coperchio anteriore Voorzijde Cubierta delantera
Parte repressa Het verlaagde gedeelte Parte hendida
Limite d’usura Slijtage-limiet Límite de desgaste
Numero delle spazzole di carbone Nr. van koolborstel No. de contacto de carbón
Copri-tappo Kap-afdekking Cubierta de la tapa
Bullone a teste easgonale Bout met zeskantige kop Perno de cabeza hexagonal
M4 × 10 M4 × 10 M4 × 10
A
1
3
2
4
1
3
2
A
B
1
2
3
4
5
6
7
8
7mm
86
17mm
5
6
5
6
7
8
English
Only for EU countries
Do not dispose of electric tools together with
household waste material!
In observance of European Directive 2002/96/EC
on waste electrical and electronic equipment and
its implementation in accordance with national
law, electric tools that have reached the end of
their life must be collected separately and returned
to an environmentally compatible recycling
facility.
Deutsch
Nur für EU-Länder
Werfen Sie Elektrowerkzeuge nicht in den
Hausmüll!
Gemäss Europäischer Richtlinie 2002/96/EG über
Elektro- und Elektronik- Altgeräte und Umsetzung
in nationales Recht müssen verbrauchte
Elektrowerkzeuge getrennt gesammelt und einer
umweltgerechten Wiederververtung zugeführt
werden.
Français
Pour les pays européens uniquement
Ne pas jeter les appareils électriques dans les
ordures ménagères!
Conformément à la directive européenne 2002/96/
EG relative aux déchets d’équipements électriques
ou électroniques (DEEE), et à sa transposition dans
la législation nationale, les appareils électriques
doivent être collectés à part et être soumis à un
recyclage respectueux de l’environnement.
Italiano
Solo per Paesi UE
Non gettare le apparecchiature elettriche tra i rifiuti
domestici.
Secondo la Direttiva Europea 2002/96/CE sui rifiuti
di apparecchiature elettriche ed elettroniche e la
sua attuazione in conformità alle norme nazionali,
le apparecchiature elettriche esauste devono
essere raccolte separatamente, al fine di essere
reimpiegate in modo eco-compatibile.
Nederlands
Alleen voor EU-landen
Geef elektrisch gereedschap niet met het huisvuil
mee!
Volgens de Europese richtlijn 2002/96/EG inzake
oude elektrische en elektronische apparaten en de
toepassing daarvan binnen de nationale
wetgeving, dient gebruikt elektrisch gereedschap
gescheiden te worden ingezameld en te worden
afgevoerd naar een recycle bedrijf dat voldoet aan
de geldende milieu-eisen.
Español
Sólo para países de la Unión Europea
¡No deseche los aparatos eléctricos junto con los
residuos domésticos!
De conformidad con la Directiva Europea 2002/96/
CE sobre residuos de aparatos eléctricos y
electrónicos y su aplicación de acuerdo con la
legislación nacional, las herramientas eléctricas
cuya vida útil haya llegado a su fin se deberán
recoger por separado y trasladar a una planta de
reciclaje que cumpla con las exigencias
ecológicas.
3
English
GENERAL SAFETY RULES
WARNING!
Read all instructions
Failure to follow all instructions listed below may result in
electric shock, fire and/or serious injury.
The term “power tool” in all of the warnings listed below
refers to your mains operated (corded) power tool or
battery operated (cordless) power tool.
SAVE THESE INSTRUCTIONS
1) Work area
a) Keep work area clean and well lit.
Cluttered and dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases or dust.
Power tools create sparks which may ignite the
dust of fumes.
c) Keep children and bystanders away while operating
a power tool.
Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way.
Do not use any adapter plugs with earthed (grounded)
power tools.
Unmodified plugs and matching outlets will reduce
risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators.
There is an increased risk of electric shock if your
body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk
of electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts.
Damaged or entangled cords increase the risk of
electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces
the risk of electric shock
3) Personal safety
a) Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or under
the influence of drugs, alcohol or medication.
A moment of inattention while operating power
tools may result in serious personal injury.
b) Use safety equipment. Always wear eye protection.
Safety equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing protection used
for appropriate conditions will reduce personal
injuries.
c) Avoid accidental starting. Ensure the switch is in the
off position before plugging in.
Carrying power tools with your finger on the
switch or plugging in power tools that have the
switch on invites accidents.
d) Remove any adjusting key or wrench before turning
the power tool on.
A wrench or a key left attached to a rotating part
of the power tool may result in personal injury.
e) Do not overreach. Keep proper footing and balance
at all times.
This enables better control of the power tool in
unexpected situations.
f) Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves away
from moving parts.
Loose clothes, jewellery or long hair can be caught
in moving parts.
g) If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used.
Use of these devices can reduce dust related hazards.
4) Power tool use and care
a) Do not force the power tool. Use the correct power
tool for your application.
The correct power tool will do the job better and
safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn
it on and off.
Any power tool that cannot be controlled with the
switch is dangerous and must be repaired.
c) Disconnect the plug from the power source before
making any adjustments, changing accessories, or
storing power tools.
Such preventive safety measures reduce the risk
of starting the power tool accidentally.
d) Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
e) Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tools
operation.
If damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained
power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control.
g) Use the power tool, accessories and tool bits etc., in
accordance with these instructions and in the manner
intended for the particular type of power tool, taking
into account the working conditions and the work to
be performed.
Use of the power tool for operations different from
intended could result in a hazardous situation.
5) Service
a) Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the power tool
is maintained.
PRECAUTION
Keep children and infirm persons away.
When not in use, tools should be stored out of reach of
children and infirm persons.
5
English
4. Mounting an accessory, such as a bull point, a cutter,
etc.
CAUTION:
Be sure to switch OFF and disconnect the attachment
plug from the receptacle to avoid a serious accident.
NOTE:
For accessories such as a bull point and a cutter, use
only Hitachi genuine parts.
* It is possible to attach an accessory, such as a bull
point, a cutter, etc., with any of the three types of
the accessory shank portion shapes shown below.
Air Tool Shank Bit
Standard Hex. Shank Bit (Combo Type)
Retaining Groove Bit without Collar
Mounting air tool shank and standard hexagonal
shank tools.
(1) Clean, then smear the accessory shank portion
grease or machine oil.
(2) Move the retainer to open position A and seat
the accessory, such as a bull point, a cutter, etc.,
in the hexagonal hole in the front cover (See
Fig. 1).
(3) Clamp the accessory into place by bringing the
retainer to the clamp position. To make sure that
the accessory is properly mounted, pull on the
accessory. (Fig. 2)
Mounting standard hexagonal shanks and retaining
groove shanks without collars.
(1) Clean, then smear the accessory shank portion
with grease or machine oil.
(2) Move the retainer to position A. Align the
accessory shank portion so that its recessed
portion is under clamp and seat the accessory,
such as a bull point, a cutter, etc., in the hexagonal
hole in the front cover (See Fig. 3).
(3) Clamp the accessory into place by bringing the
retainer to clamp position B. To make sure that
the accessory is properly mounted, pull on the
accessory. (Fig. 4)
NOTE:
When removing the accessory, such as a bull point, a
cutter, etc., carry out the above procedures in reverse.
HOW TO USE THE DEMOLITION HAMMER
1. Pull the trigger switch after applying the tip of the bit
to the crushing position.
2. Operate this Demolition Hammer by utilizing its empty
weight. The performance will not be better even if it
is pressed or thrust forcibly against the work surface.
Hold this Demolition Hammer with a force just
sufficient to counteract the reaction.
This Demolition Hammer is equipped with a spring
cushion on the handle so that chipping vibration is
not conveyed to the operator.
Operate this Demolition Hammer without forcing the
handle too strongly.
CAUTION
Sometimes the power tool does not begin the striking
stroke even when the motor rotates because the oil
has become thick.
If the power tool is used at low temperatures or if it is
used after a long idle time, this Demolition Hammer
should be kept running in for about five minutes in
order to warm it up.
GREASE REPLACEMENT
This Demolition Hammer is of full air-tight construction
to protect against dust and to prevent lubricant leakage.
Therefore, this Demolition Hammer can be used without
lubrication for long periods. Replace the grease as
described below.
Grease Replacement Period
After purchase, replace grease after every 6 months of
usage. Ask for grease replacement at the nearest
authorized Service Center.
MAINTENANCE AND INSPECTION
CAUTION:
Be sure to switch OFF and disconnect the attachment
plug from the receptacle to avoid a serious accident.
1. Inspecting this Demolition Hammer
Since use of a dull accessory, such as a bull point, a
cutter, etc. will degrade efficiency and cause possible
motor malfunction, sharpen or replace with a new
one as soon as abrasion is noted.
2. Inspecting the mounting screws:
Regularly inspect all mounting screws and ensure
that they are properly tightened. Should any of the
screws be loose, retighten them immediately. Failure
to do so could result in serious hazard.
3. Inspecting the retainer (Fig. 1, Fig. 2)
The retainer may become loose due to excessive
use. Always, pay attention to its proper functioning
to securely hold the accessory shank portion. If any
wear and tear is found, bring this Demolition Hammer
to an authorized service center for maintenance
service.
4. Maintenance of the motor
The motor unit winding is the very heart of the
power tool. Exercise due care to ensure the winding
does not become damaged and/or wet with oil or
water.
5. Inspecting the carbon brushes (Fig. 5)
The Motor employs carbon brushes which are
consumable parts. When they become worn to or
near the wear limit, it results in motor trouble.
When an auto-stop carbon brush is equipped, the
motor will stop automatically. At that time, replace
both carbon brushes with new ones which have the
same carbon brush Numbers shown in the Fig. 5. In
addition, always keep carbon brushes clean and
ensure that they slide freely within the brush holders.
6
English
6. Replacing carbon brushes:
Loosen the screws (Hexagon socket hd. bolt M4×10)
of the cap covers, then remove the cap covers (Fig.
6). After removing the brush caps, the carbon brushes
can be removed.
After replacing the carbon brushes, tighten the brush
caps, then mount the cap covers securely.
7. Service parts list
A: Item No.
B: Code No.
C: No. Used
D: Remarks
CAUTION
Repair, modification and inspection of Hitachi Power
Tools must be carried out by an Authorized Service
Center.
This Parts List will be helpful if presented with the
power tool to the Authorized Service Center when
requesting repair or other maintenance.
In the operation and maintenance of power tools, the
safety regulations and standards prescribed in each
country must be observed.
MODIFICATIONS
Hitachi Power Tools are constantly being improved
and modified to incorporate the latest technological
advancements.
Accordingly, some parts (i.e. code numbers and/or
design) may be changed without prior notice.
NOTE
Due to HITACHIs continuing program of research and
development, the specifications herein are subject to
change without prior notice.
IMPORTANT
Correct connection of the plug
The wires of the main lead are coloured in accordance
with the following code:
Blue: Neutral
Brown: Live
As the colours of the wires in the main lead of this power
tool may not correspond with the coloured markings
identifying the terminals in your plug proceed as follows:
The wire coloured blue must be connected to the terminal
marked with the letter N or coloured black. The wire
coloured brown must be connected to the terminal
marked with the letter L or coloured red. Neither core
must be connected to the each terminal.
NOTE
This requirement is provided according to BRITISH
STANDARD 2769: 1984.
Therefore, the letter code and colour code may not be
applicable to other markets except The United Kingdom.
Information concerning vibration
The measured values were determined according to
EN60745 .
The typical weighted root mean square acceleration
value: 21 m/s
2
.
7
Deutsch
ALLGEMEINE SICHERHEITSMASSNAHMEN
WARNUNG!
Lesen Sie sämtliche Hinweise durch
Wenn nicht sämtliche nachstehenden Anweisungen
befolgt werden, kann es zu Stromschlag, Brand und/oder
ernsthaften Verletzungen kommen.
Der Begriff „Elektrowerkzeug“ bezieht sich in den
folgenden Warnhinweisen auf Elektrowerkzeuge mit Netz-
(schnurgebunden) oder Akkubetrieb (schnurlos).
BEWAHREN SIE DIESE ANWEISUNGEN AUF
1) Arbeitsbereich
a) Sorgen Sie für einen sauberen und gut
ausgeleuchteten Arbeitsbereich.
Zugestellte und dunkle Bereiche ziehen Unfälle
förmlich an.
b) Verwenden Sie Elektrowerkzeuge niemals an
Orten, an denen Explosionsgefahr besteht – zum
Beispiel in der Nähe von leicht entflammbaren
Flüssigkeiten, Gasen oder Stäuben.
Bei der Arbeit mit Elektrowerkzeugen kann es
zu Funkenbildung kommen, wodurch sich Stäube
oder Dämpfe entzünden können.
c) Sorgen Sie bei der Arbeit mit Elektrowerkzeugen
dafür, dass sich keine Zuschauer (insbesondere
Kinder) in der Nähe befinden.
Wenn Sie abgelenkt werden, können Sie die
Kontrolle über das Werkzeug verlieren.
2) Elektrische Sicherheit
a) Elektrowerkzeuge müssen mit passender
Stromversorgung betrieben werden.
Nehmen Sie niemals irgendwelche Änderungen
am Anschlussstecker vor.
Verwenden Sie bei Elektrowerkzeugen mit
Schutzkontakt (geerdet) niemals Adapterstecker.
Stecker im Originalzustand und passende
Steckdosen reduzieren das Stromschlagrisiko.
b) Vermeiden Sie Körperkontakt mit geerdeten
Gegenständen wie Rohrleitungen, Heizungen,
Herden oder Kühlschränken.
Bei Körperkontakt mit geerdeten Gegenständen
besteht ein erhöhtes Stromschlagrisiko.
c) Setzen Sie Elektrowerkzeuge niemals Regen oder
sonstiger Feuchtigkeit aus.
Wenn Flüssigkeiten in ein Elektrowerkzeug
eindringen, erhöht sich das Stromschlagrisiko.
d) Verwenden Sie die Anschlussschnur nicht
missbräuchlich. Tragen Sie das Elektrowerkzeug
niemals an der Anschlussschnur, ziehen Sie es
nicht damit heran und ziehen Sie den Stecker
nicht an der Anschlussschnur aus der Steckdose.
Halten Sie die Anschlussschnur von Hitzequellen,
Öl, scharfen Kanten und beweglichen Teilen fern.
Beschädigte oder verdrehte Anschlussschnüre
erhöhen das Stromschlagrisiko.
e) Wenn Sie ein Elektrowerkzeug im Freien
benutzen, verwenden Sie ein für den
Außeneinsatz geeignetes Verlängerungskabel.
Ein für den Außeneinsatz geeignetes Kabel
vermindert das Stromschlagrisiko.
3) Persönliche Sicherheit
a) Bleiben Sie wachsam, achten Sie auf das, was
Sie tun, und setzen Sie Ihren Verstand ein,
wenn Sie mit Elektrowerkzeugen arbeiten.
Benutzen Sie keine Elektrowerkzeuge, wenn Sie
müde sind oder unter Einfluss von Drogen,
Alkohol oder Medikamenten stehen.
Bei der Arbeit mit Elektrowerkzeugen können
bereits kurze Phasen der Unaufmerksamkeit zu
schweren Verletzungen führen.
b) Benutzen Sie Schutzausrüstung. Tragen Sie
immer einen Augenschutz.
Schutzausrüstung wie Staubmaske, rutschsichere
Sicherheitsschuhe, Schutzhelm und Gehörschutz
senken das Verletzungsrisiko bei angemessenem
Einsatz.
c) Vermeiden Sie unbeabsichtigten Anlauf. Achten
Sie darauf, dass sich der Schalter in der Aus-
(Off-) Position befindet, ehe Sie den Stecker
einstecken.
Das Herumtragen von Elektrowerkzeugen mit dem
Finger am Schalter und das Einstecken des Steckers
bei betätigtem Schalter zieht Unfälle regelrecht an.
d) Entfernen Sie sämtliche Einstellwerkzeuge
(Einstellschlüssel), ehe Sie das Elektrowerkzeug
einschalten.
Ein an einem beweglichen Teil des Elektrowerkzeugs
angebrachter Schlüssel kann zu Verletzungen führen.
e) Sorgen Sie für einen festen Stand. Achten Sie
jederzeit darauf, sicher zu stehen und das
Gleichgewicht zu bewahren.
Dadurch haben Sie das Elektrowerkzeug in
unerwarteten Situationen besser im Griff.
f) Kleiden Sie sich richtig. Tragen Sie keine lose
Kleidung oder Schmuck. Halten Sie Haar, Kleidung
und Handschuhe von beweglichen Teilen fern.
Lose Kleidung, Schmuck oder langes Haar kann
von beweglichen Teilen erfasst werden.
g) Wenn Anschlüsse für Staubabsaug- und -
sammelvorrichtungen vorhanden sind, sorgen
Sie dafür, dass diese richtig angeschlossen und
eingesetzt werden.
Die Verwendung solcher Vorrichtungen kann
Staub-bezogene Gefahren mindern.
4) Einsatz und Pflege von Elektrowerkzeugen
a) Überanspruchen Sie Elektrowerkzeuge nicht.
Benutzen Sie das richtige Elektrowerkzeug für
Ihren Einsatzzweck.
Das richtige Elektrowerkzeug erledigt seine Arbeit
bei bestimmungsgemäßem Einsatz besser und
sicherer.
b) Benutzen Sie das Elektrowerkzeug nicht, wenn es
sich nicht am Schalter ein- und ausschalten lässt.
Jedes Elektrowerkzeug, das nicht mit dem
Schalter betätigt werden kann, stellt eine Gefahr
dar und muss repariert werden.
c) Ziehen Sie den Netzstecker, ehe Sie
Einstellarbeiten vornehmen, Zubehörteile
tauschen oder das Elektrowerkzeug verstauen.
Solche präventiven Sicherheitsmaßnahmen
verhindern den unbeabsichtigten Anlauf des
Elektrowerkzeugs und die damit verbundenen
Gefahren.
d) Lagern Sie nicht benutzte Elektrowerkzeuge
außerhalb der Reichweite von Kindern, lassen
Sie nicht zu, dass Personen das Elektrowerkzeug
bedienen, die nicht mit dem Werkzeug selbst
und/oder diesen Anweisungen vertraut sind.
Elektrowerkzeuge in ungeschulten Händen sind
gefährlich.
e) Halten Sie Elektrowerkzeuge in Stand. Prüfen
Sie auf Fehlausrichtungen, sicheren Halt und
Leichtgängigkeit beweglicher Teile,
Beschädigungen von Teilen und auf jegliche
andere Zustände, die sich auf den Betrieb des
Elektrowerkzeugs auswirken können.
8
Deutsch
TECHNISCHE DATEN
Spannung (je nach Gebiet)* (110V, 115V, 120V, 127V, 220V, 230V, 240V)
Leistungsaufnahme 1450W*
Vollastschlagzahl 850/min.
Gewicht (ohne Kabel) 32 kg
* Überprüfen Sie unbedingt die Produktangaben auf dem Typenschild dieses Hammers, da sie sich je nach
Verkaufsgebiet ändern können.
(5) Stampferplatten + Schaft
Bei Beschädigungen lassen Sie das
Elektrowerkzeug reparieren, ehe Sie es benutzen.
Viele Unfälle mit Elektrowerkzeugen sind auf
schlechte Wartung zurückzuführen.
f) Halten Sie Schneidwerkzeuge scharf und sauber.
Richtig gewartete Schneidwerkzeuge mit scharfen
Schneidkanten bleiben weniger häufig hängen
und sind einfacher zu beherrschen.
g) Benutzen Sie Elektrowerkzeuge, Zubehör,
Werkzeugspitzen und Ähnliches in
Übereinstimmung mit diesen Anweisungen und
auf die für das jeweilige Elektrowerkzeug
bestimmungsgemäße Weise beachten Sie
dabei die jeweiligen Arbeitsbedingungen und
die Art und Weise der auszuführenden Arbeiten.
Der bestimmungswidrige Einsatz von
Elektrowerkzeugen kann zu gefährlichen
Situationen führen.
5) Service
a) Lassen Sie Elektrowerkzeuge durch qualifizierte
Fachkräfte und unter Einsatz passender,
zugelassener Originalteile warten.
Dies sorgt dafür, dass die Sicherheit des
Elektrowerkzeugs nicht beeinträchtigt wird.
VORSICHT
Von Kindern und gebrechlichen Personen fernhalten.
Werkzeuge sollten bei Nichtgebrauch außerhalb der
Reichweite von Kindern und gebrechlichen Personen
aufbewahrt werden.
Gesamtlänge: 520 mm
Gesamtlänge: 410 520 mm
Gesamtlänge: 395 mm
(2) Kaltmeißel
(1) Spitzmeißel
Außendurchmesser: 200 mm
STANDARDZUBEHÖR
(1) Sechskantschlüssel für M12 ......................................1
(2) Sechskantschlüssel für M6 ........................................1
(3) Sechskantschlüssel für M4 ........................................1
(4) Seitengriff ....................................................................1
(5) Bolzen .......................................................................... 4
Das Standardzubehör kann ohne vorherige Bekannt-
machung jederzeit geändert werden.
SONDERZUBEHÖR (separat zu beziehen)
VORSICHTSMASSNAHMEN BEI DER BENUTZUNG
DES HAMMERS
1. Tragen Sie einen Gehörschutz
Starke und/oder dauerhafte Lärmbelastung kann zu
Gehörverlust führen.
2. Benutzen Sie die mit dem Werkzeug gelieferten
Zusatzgriffe.
Wenn Sie die Kontrolle über das Werkzeug verlieren,
kann es zu Verletzungen kommen.
3. Die Bohrerspitze nicht während oder unmittelbar nach
dem Betrieb berühren. Die Bohrerspitze wird während
des Betriebs sehr heiß, und es könnte zu ernsthaften
Verbrennungen kommen.
4. Bevor man in einer Wand, dem Boden oder der Decke
etwas ausbricht, meißelt oder bohrt, muß man sich
sorgfältig davon überzeugen, daß keine elektrischen
Kabel oder Kabelrohre darunter liegen.
5. Stellen Sie den Bohrerhalter korrekt ein.
6. Vergewissern Sie sich vor der Arbeit, daß die
Schrauben richting festgezogen sind.
7. Geben Sie acht auf untenstehende Leute und
Gegenstände, wenn Sie an einem weit erhöhten Platz
arbeiten.
8. Tragen Sie Sicherheitsschuhe, um Verletzungen der
Füße zu vermeiden.
(3) Spaten
(4) Spatmeißel
Gesamtlänge: 546 mm
Gesamtlänge: 520 mm
Breite: 75 mm
10
Deutsch
SCHMIERFETTWECHSEL
Der Mechanismus dieses Hammers ist vollkommen
luftdicht gekapselt, um das Eindringen von Staub und
das Auslaufen von Schmiermittel zu verhüten. Daher
kann er lange Zeit ohne Schmierung benutzt werden.
Wechseln Sie das Schmierfett, wie unten angegeben.
Schmierfettwechsel-Intervall
Wechseln Sie das Schmierfett nach dem Kauf alle 6
Betriebsmonate. Wenden Sie sich bezüglich des
Schmierfettwechsels an die nächste autorisierte
Kundendienststelle.
WARTUNG UND INSPEKTION
VORSICHT:
Immer den Betriebsschalter auf Aus stellen und
den Netzstecker aus der Steckdose ziehen, um Unfälle
zu vermeiden.
1. Inspektion des Hammers
Da der Gebrauch eines stumpfen Werkzeugs (z.B.
Spitzmeißel, Flachmeißel usw.) die Leistung
verschlechtert und möglicherweise Motorstörungen
verursacht, ist das Werkzeug zu schärfen oder durch
ein neues zu ersetzen, sobald Verschleiß festgestellt
wird.
2. Inspektion der Befestigungsschrauben:
Alle Befestigungsschrauben werden regelmäßig
inspiziert und geprüft, ob sie gut angezogen sind.
Wenn sich eine der Schrauben lockert, muß sie sofort
wieder angezogen werden. Geschieht das nicht, kann
das zu erheblichen Gefahren führen.
3. Inspektion des Halters (Abb. 1, Abb. 2)
Der Halter kann sich bei übermäßiger Beanspruchung
lösen. Achten Sie stets darauf, dass er einwandfrei
funktioniert, um den Werkzeugschaft sicher zu halten.
Falls Sie Verschleiß oder Beschädigung feststellen,
bringen Sie diesen Hammer zur Wartung zu einer
autorisierten Kundendienststelle.
4. Wartung des Motors:
Die Motorwicklung ist das HERZ des
Elektrowerkzeugs. Daher ist besonders sorgfältig
darauf zu achten, daß die Wicklung nicht beschädigt
wird und/oder mit Öl oder Wasser in Berührung
kommt.
5. Inspektion der Kohlebürsten (Abb. 5)
Im Motor sind Kohlebürsten verwendet, die
Verbauchsteile sind. Wenn sie abgenützt sind, kann
es zu Motorschäden führen. Wenn der Motor mit
einer Auto-Stop Kohlebürste ausgestattet ist, wird er
automatisch anhalten. Beide Kohlebürsten sollen
dann durch neue ersetzt werden, die dieselbe
Bürstennummer tragen, wie auf der Abb. 5. Darüber
hinaus müssen die Kohlebürsten immer sauber
gehalten werden und müssen sich in der
Bürstenhalterung frei bewegen können.
6. Austausch einer Kohlebürste:
Lösen Sie die Schraube (Sechskantsteckfassung für
Bolzen M4×10) des Kappendeckels, und nehmen Sie
dann die Endabdeckungab. (Abb. 6)
Nach Abnehmen der Bürstenkappe kann die
Kohlebürste entfernt werden.
Ziehen Sie nach dem Wiedereinsetzen der
Kohlebürste die Bürstenkappe fest, und setzen Sie
den Kappendeckel wieder sicher an.
7. Liste der Wartungsteile
A: Punkt Nr.
B: Code Nr.
C: Verwendete Anzahl
D: Bemerkungen
VORSICHT
Reparatur, Modifikation und Inspektion von Hitachi-
Elektrowerkzeugen müssen von einer autorisierten
Hitachi-Kundendienststelle durchgeführt werden.
Diese Teileliste ist hilfreich, wenn sie bei der
Anforderung von Reparatur- oder Wartungsarbeiten
zusammen mit dem Elektrowerkzeug der autorisierten
Kundendienststelle ausgehändigt wird.
Bei Betrieb und Wartung von Elektrowerkzeugen
müssen die Sicherheitsvorschriften und Normen
beachtet werden.
MODIFIKATIONEN
Hitachi-Elektrowerkzeuge werden fortwährend
verbessert und modifiziert, um die neuesten
technischen Fortschritte einzubauen.
Dementsprechend ist es möglich, daß einige Teile
(z.B. Codenummern bzw. Entwurf) ohne vorherige
Benachrichtigung geändert werden.
ANMERKUNG
Aufgrund des ständigen Forschungs-und Entwicklungs-
programms von HITACHI sind Änderungen der hierin
gemachten technischen Angaben nicht ausgeschlossen.
Information über Vibration
Die Meßwerte wurden entsprechend EN60745 bestimmt.
Der typische gewogene quadratische Mittelwert für die
Beschleunigung ist 21 m/s
2
.
11
Français
CONSIGNES DE SÉCURITÉ GÉNÉRALES
AVERTISSEMENT!
Lire toutes les instructions
Tout manquement à observer ces instructions peut
engendrer des chocs électriques, des incendies et/ou des
blessures graves.
Le terme "outil électrique" qui figure dans l'ensemble des
avertissements ci-dessous se réfère aux outils électriques
(câblé) ou aux outils à piles (sans fil).
CONSERVER CES INSTRUCTIONS
1) Aire de travail
a) Maintenir l'aire de travail propre et bien éclairée.
Les endroits encombrés et sombres sont propices
aux accidents.
b) Ne pas utiliser d'outils électriques en présence
de liquides, gaz ou poussière inflammables, au
risque de provoquer une explosion.
Les outils électriques créent des étincelles
susceptibles d'enflammer la poussière.
c) Ne pas laisser les enfants et les visiteurs
s'approcher de vous lorsque vous utiliser un outil
électrique.
Les distractions peuvent faire perdre le contrôle.
2) Sécurité électrique
a) Les prises de l'outil électrique doivent
correspondre à la prise secteur.
Ne jamais modifier la prise.
Ne pas utiliser d'adaptateurs avec les outils
électriques mis à la masse.
Les prises non modifiées et les prises secteurs
correspondantes réduisent les risques de choc
électrique.
b) Eviter tout contact avec les surfaces mises à la
masse telles que les tuyaux, radiateurs, bandes
et réfrigérateurs.
Le risque de choc électrique est accru en cas de
mise à la masse du corps.
c) Ne pas exposer les outils électriques à la pluie ou
à des conditions humides.
Si l'eau pénètre dans l'outil, cela augmente les
risques de choc électrique.
d) Ne pas utiliser le cordon à tort. Ne jamais utiliser
le cordon pour transporter ou débrancher l'outil
électrique.
Maintenir le cordon loin de la chaleur, de l'huile,
des bords pointus ou des pièces mobiles.
Les cordons endommagés ou usés augmentent
les risques de choc électrique.
e) En cas d'utilisation d'un outil électrique à
l'extérieur, utiliser un cordon de rallonge adapté
à un usage extérieur.
L'utilisation d'un cordon adapté à l'usage extérieur
réduit les risques de choc électrique.
3) Sécurité personnelle
a) Restez alerte, regarder ce que vous faites et usez
de votre bon sens en utilisant un outil électrique.
Ne pas utiliser d'outil électrique si vous êtes sous
l'influence de drogues, d'alcool ou de
médicaments.
Pendant l'utilisation d'outils électrique, un instant
d'inattention peut entraîner des blessures graves.
b) Utiliser des équipements de sécurité. Toujours
porter des verres de protection.
L'utilisation d'équipements de sécurité tels que
les masques anti-poussière, les chaussures de
sécurité anti-dérapantes, les casques ou les
protections auditives dans des conditions
appropriées réduisent les risques de blessures.
c) Eviter les démarrages accidentels. Veiller à ce
que l'interrupteur soit en position d'arrêt avant
de brancher l'outil.
Transporter les outils électriques avec le doigt sur
l'interrupteur ou brancher les outils électriques
avec l'interrupteur en position de marche peut
entraîner des accidents.
d) Retirer toute clé de sécurité ou clé avant de mettre
l'outil électrique en marche.
Laisser une clé ou une clé de sécurité sur une
partie mobile de l'outil électrique peut engendrer
des blessures.
e) Ne pas trop se pencher. Toujours garder une
bonne assise et un bon équilibre pendant le travail.
Cela permet un meilleur contrôle de l'outil
électrique dans des situations imprévisibles.
f) Porter des vêtements adéquats. Ne pas porter de
vêtements amples ni de bijoux. Maintenir les
cheveux, les vêtements et les gants loin des pièces
mobiles.
Les vêtements amples ou les cheveux longs
peuvent se prendre dans les pièces mobiles.
g) En cas de dispositifs destinés au raccordement
d'installations d'extraction et de recueil de la
poussière, veiller à ce qu'ils soient correctement
raccordés et utilisés.
L'utilisation de ces dispositifs peut réduire les
dangers associés à la poussière.
4) Utilisation et entretien d'un outil électrique
a) Ne pas forcer sur l'outil électrique. Utiliser l'outil
électrique adapté à vos travaux.
Le bon outil électrique fera le travail mieux et en
toute sécurité au régime pour lequel il a été conçu.
b) Ne pas utiliser l'outil électrique si l'interrupteur
ne le met pas en position de marche et d'arrêt.
Tout outil ne pouvant être contrôlé par
l'interrupteur est dangereux et doit être réparé.
c) Débrancher la prise avant de procéder à des
réglages, au remplacement des accessoires ou
au stockage des outils électriques.
Ces mesures préventives de sécurité réduisent les
risques de démarrage accidentel de l'outil électrique.
d) Stockez les outils électriques inutilisés hors de la
portée des enfants et ne pas laisser des personnes
non familiarisées avec l'outil ou ces instructions
utiliser l'outil électrique.
Les outils électriques sont dangereux entre les
mains d'utilisateurs non habilités.
e) Entretenir les outils électriques. Vérifier l'absence
de mauvais alignement ou d'arrêt,
d'endommagement de pièces ou toute autre
condition susceptible d'affecter l'opération de l'outil.
Si l'outil est endommagé, le faire réparer avant
utilisation.
De nombreux accidents sont dus à des outils mal
entretenus.
18
Italiano
MANUTENZIONE E CONTROLLO
CAUTELA:
Assicurarsi di spegnere (OFF) e di scollegare la spina
del cavo dalla presa di corrente per evitare rischi.
1. Ispezione del demolitore
Poiché luso di accessori, come una punta gigante,
un coltello, ecc. usurati riduce lefficienza e causa
possibili problemi di funzionamento del motore,
affilare o sostituire con un pezzo nuovo non appena
si nota abrasione.
2. Controllo delle viti di tenuta:
Controllare regolarmente tutte le viti di tenuta e
assicurarsi che siano esclusivamente serrate. Nel caso
che una di queste viti dovesse allentarsi riserrarla
immediatamente. Se si non ottiene di farlo, si può
causare un grave incidente.
3. Ispezione del trattenitore (Fig.1, Fig.2)
Il trattenitore può allentarsi con un uso eccessivo.
Fare sempre attenzione al suo corretto funzionamento
per trattenere la parte gambo dellaccessorio. Se si
nota usura o danni, portare il demolitore ad un centro
assistenza autorizzato per manutenzione.
4. Manutenzione del motore:
Lavvolgimento del motore il vero e proprio cuore
degli attezzi elettrici. Fare attenzione a non
danneggiare lavvolgimento e/o non bagnarlo con
olio o acqua.
5. Controllo delle spazzole di carbone (Fig. 5)
Il motore impiega spazzole di carbone, materiali
soggeti a consumo. Quando una spazzola è cosumata
o vicina al limite dusara, il motore potrebbe subire
dei danni. Usando spazzole di carbone con arresto
automatico, il motore si ferma automaticamente
quando queste sono consumate. In tal caso, bisogna
sostituirle con delle nuove, dello stesso numero como
indicato nella Fig. 5. Tenere, inoltre, sempre pulite le
spazzole e fare in modo che questo scorrino
liberamente allinterno del portaspazzole.
6. Sostituzione di una spazzola di carbone:
Allentare la vite (bullone a testa esagonale M4×10)
della copertura del tappo e rimuovere la stessa.
(Fig. 6)
La spazzola di carbone va rimossa dopo averne
rimosso il cappuccio.
Dopo aver sostituito la spazzola, stringerne il
cappuccio e quindi montare saldamente la copertura
de tappo.
7. Lista dei pezzi di ricambio
A: N. voce
B: N. codice
C: N. uso
D: Note
CAUTELA
La riparazione, modifica e ispezione di utensili elettrici
Hitachi deve essere eseguita da un centro assistenza
autorizzato.
Questa lista dei pezzi di ricambio è utile se viene
presentato insieme allutensile elettrico al centro
assistenza autorizzato quando si richiedono
riparazioni o altri interventi di manutenzione.
Nelluso e nella manutenzione degli utensili elettrici
devono essere osservate le normative di sicurezza e i
criteri prescritti in ciascun paese.
MODIFICHE
Gli utensili elettrici Hitachi vengono continuamente
migliorati e modificati per includere le più recenti
innovazioni tecnologiche.
Di conseguenza, alcuni pezzi (p.es. numero di codice
e/o design) possono essere modificati senza
preavviso.
NOTA
A causa del continuo programma di ricerca e sviluppo
della HITACHI, le caratteristiche riportate in questo foglio
sono soggette a cambiamenti senza preventiva
comunicazione.
Informazioni riguardanti le vibrazioni
I valori misurati sono stati determinati in conformità a
EN60745.
Il valore efficace pesato tipico dellaccelerazione è di
21 m/s
2
.
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Hitachi H90SE bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Hitachi H90SE in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans als bijlage per email.

De handleiding is 0,7 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info