505781
7
Verklein
Vergroot
Pagina terug
1/78
Pagina verder
1
Projector
CP-X10000/CP-WX11000/CP-SX12000
User's Manual (detailed) – Operating Guide
Thank you for purchasing this projector.
►Before using this product, please read the "User's Manual -
Safety Guide" and related manuals to ensure the proper use of this product.
After reading them, store them in a safe place for future reference.
WARNING
• The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in
this manual.
• The reproduction, transfer or copy of all or any part of this document is not
permitted without express written consent.
NOTE
Trademark acknowledgment
Various symbols are used in this manual. The meanings of these symbols are
described below.
About this manual
WARNING
CAUTION
This entry warns of a risk of serious personal injury or even
death.
This entry warns of a risk of personal injury or physical damage.
Please refer to the pages written following this symbol.
Windows
®
is a registered trademark of Microsoft Corporation in the U.S. and/or
other countries.
• VESA and DDC are trademarks of the Video Electronics Standard Association.
• Mac
®
is a registered trademark of Apple Inc.
• DVI is a trademark of Digital Display Working Group.
HDMI, the HDMI logo and High-Denition Multimedia Interface are trademarks
or registered trademarks of HDMI Licensing LLC.
Trademark PJLink is a trademark applied
for trademark rights in Japan, the United
States of America and other countries and areas.
All other trademarks are the properties of their respective owners.
NOTICE This entry notices of fear of causing trouble.
2
Contents
Contents
About this manual ...........1
Contents . . . . . . . . . . . . . . . . . . 2
Introduction . . . . . . . . . . . . . . . 3
Projector features . . . . . . . . . . . . . . . 3
Important safety instruction (for the
moving) .......................3
Checking the contents of package . . 4
Attaching the lens unit ............4
Part names . . . . . . . . . . . . . . . . 5
Projector . . . . . . . . . . . . . . . . . . . . . . 5
Control panel ...................6
Indicator lamp ..................6
Rear panel . . . . . . . . . . . . . . . . . . . . 6
Remote control . . . . . . . . . . . . . . . . . 7
Setting up . . . . . . . . . . . . . . . . . 8
Installation environment . . . . . . . . . . 8
Projection style . . . . . . . . . . . . . . . . . 8
Projection distance . . . . . . . . . . . . . . 9
Placement ....................10
Supplementary anti-theft means ...10
Connecting with your devices ..... 11
Connecting power supply . . . . . . . . 15
Remote control ............16
Putting batteries . . . . . . . . . . . . . . . 16
Transmitting condition ...........17
Changing the frequency of remote
control signal ..................17
Using the REMOTE ID function . . . 18
Using as a wired remote control ...18
Laser pointer ..................18
Operating . . . . . . . . . . . . . . . . 19
Turning on ....................19
Turning off ....................20
Using the elevator feet . . . . . . . . . . 20
Using the functions for the lens ....21
Displaying and switching the image 22
Selecting an aspect ratio .........23
Using the automatic adjustment feature
. . 23
Adjusting the position . . . . . . . . . . . 24
Correcting the keystone distortion
...24
Using the magnify feature ........25
Temporarily freezing the screen . . . 25
Temporarily blanking the screen ...26
Temporarily shutting the screen ...26
P by P (Picture by Picture) . . . . . . . 27
Using the menu function . . . . . . . . 28
EASY MENU. . . . . . . . . . . . . . . 29
As p e c t , Au t o k e y s t o n e ,
ke y s t o n e ,
ke y s t o n e
,
pi c t u r e m o d e , ec o m o d e ,
mi r r o r , re s e t , Fi l t e r t i m e , lA n g u A g e ,
A
d v A n c e d m e n u , ex i t
PICTURE menu . . . . . . . . . . . . 31
Br i g h t n e s s , co n t r A s t , gA m m A , co l o r t e m p ,
c
o l o r , ti n t , sh A r p n e s s , Ac t i v e i r is , my m e m o r y
IMAGE menu . . . . . . . . . . . . . . 34
As p e c t , ov e r s c A n , v p o s i t i o n , h p o s i t i o n ,
h
p h A s e , h s i z e , Au t o A d j u s t e x e c u t e
INPUT menu . . . . . . . . . . . . . . 36
pr o g r e s s i v e , vi d e o n r , 3d-y c s , co l o r
s p A c e , co m p o n e n t , vi d e o F o r m A t , di g i tA l
F o m A t , dig itA l r A n g e , co m p u t e r in , Fr A m e
l o c k , re s o l u t i o n
SETUP menu ..............40
Au t o k e y s t o n e ,
ke y s t o n e ,
ke y s t o n e
,
ec o m o d e , mi r r o r , mo n i t o r o u t
SCREEN menu .............42
lA n g u A g e , me n u p o s i t i o n , Bl A n k , st A r t u p ,
m
yScreen
,
m
yScreen Lock
, me s s A g e , so u r c e
n A m e ,te m p l A t e , c.c.
OPTION menu . . . . . . . . . . . . . 47
so u r c e s k i p , Au t o s e A r c h , Au t o k e y s t o n e
,
d
i r e c t o n , Au t o o F F , su t t e r t i m e r lA m p
t i m e , Fi l t e r t i m e , my B u t t o n , my s o u r c e ,
s
e r v i c e
NETWORK menu ...........56
se t u p , pr o j e c t o r n A m e ,
my i m A g e
,
i
n F o r m A t i o n , se r v i c e
SECURITY menu
. . . . . . . . . . . 61
en t e r p A s s w o r d , se c u r i t y p A s s w o r d ,
myScreen
p A s s w o r d , pi n l o c k , tr A n s i t i o n
d e t e c t o r , my t e x t p A s s w o r d , my t e x t
d i s p l A y , my t e x t w r i t i n g
Maintenance ..............67
Lamp unit . . . . . . . . . . . . . . . . . . . . 67
Filter unit .....................69
Internal clock battery ............70
Others .......................70
Troubleshooting . . . . . . . . . . . 71
Related messages . . . . . . . . . . . . . 71
Regarding the indicator lamps . . . . 72
Phenomena that may be easily
mistaken for machine defects
......74
Warranty and after-service ...77
Specications .............77
3
Introduction
This projector has a capability to project various picture signals onto a screen. This
projector requires only a minimal amount of space for installation and can produce
a large projected image from even a short distance. Moreover, the projector has the
following features to extend its potentiality for broad use.
ü The HDMI port can support various image equipment which have digital
interface to get clearer pictures on a screen.
ü
The super bright lamp and high quality optical system can fulll the demands
of professional uses.
ü
The selectable optional lens units and the super wide range of the lens shift
feature will give much more chances to install the product wherever you
want.
ü
The lens shutter can hide your inside operations and will help your
presentation.
ü
The wealth of I/O ports is believed to support any business scene.
ü
This projector's network supports the PJLink
TM
standard.
ü
PJLink
TM
is a unied standard for operating and controlling data projectors.
PJLink
TM
enables central control of projectors manufactured by different
vendors and projectors can be operated by a controller. PJLink
TM
compliant
equipment can be managed and controlled at any time and in any place,
regardless of manufacturer.
For the command of PJLink
TM
, see
User's Manual (Technical)
For specications of PJLink
TM
, see the web site of the Japan Business
Machine and Information System Industries Association.
URL: http://pjlink.jbmia.or.jp
ü
The unique Electric Dust Catcher Air lter system is expected to prevent
air dust from getting into the projector and offers you less maintenance
frequency.
Projector features
Introduction
Important safety instruction (for moving)
*For details, see the
User's Manual (concise) or Safety Guide.
►Always move the projector
with two or more people. Place your hands in the
dented parts on the bottom of the projector when
carrying the projector.
►Remove all the attachments including the power
cord and cables, from the projector when carrying
the projector.
WARNING
Dented parts
4
Introduction
(1) Projector
(2) Lens adapter
(3) Hexagon wrench (for installation of
the optional lens unit)
(4) Power cord
(5) Computer cable
(6) Remote control
with two batteries
(7) User’s manuals (a book and a CD)
(8) Security label
Soon after purchasing this product, check that all the following items are included in
the package. If any items should be missing, tell your dealer immediately.
►Use only the lens unit specied by the manufacturer.
►Leave both attaching and removing the lens unit to the service personnel your
dealer sent.
►Read and keep the user’s manual of the lens unit.
►Use special caution not to drop the lens unit or knock it against something.
►Do not transport the projector to which the lens unit is attached.
WARNING
Keep the original packing materials for the lens unit, and use
them correctly when transporting or storing the lens unit.
CAUTION
►Do not touch the lens surface directly.
► Keep the dust protector of the projector, and use it while no lens unit is
attached to the projector.
NOTICE
• This product is supplied without a lens unit so that you can choose
from a range of lenses (77) that can meet your requirements. Ask your dealer
about details, and prepare one or more lens unit together with this product.
• Some additional accessories or services may be required for your use. We
recommend consult with your dealer beforehand.
NOTE
►Keep the original packing materials, and use them correctly
when transporting or storing the product.
CAUTION
Request your dealer to install the lens unit in the projector. Be sure to leave both
removing and attaching the lens unit to the service personnel your dealer sent.
(1)
(2)
(3)
(8)
(4)
(7)
(6)(5)
BLANK LASER
FREEZE
LASER
INDICATOR
DIGITAL
STANDBY/ON COMPUTER
LENS SHIFT
KEYSTONE
ID 3
ID 4
ID 2
ID 1
VIDEO
AUTO
ASPECT
RESET
MENU
MAGNIFY
ON
OFF
3
4
ENTER
FOCUS
+
-
POSITION
PbyP
ZOOM
+
-
1
2
MY BUTTON
MY SOURCE
SHUTTER
Checking the contents of package
Attaching the lens unit
5
Part names
Part names
Projector
(1) Dust protector
(2) Remote sensors (x 2) (
17)
(3) Exhaust vents
(4) Filter cover (
69)
The lter unit and intake vent are
inside.
(5) Control panel (
6)
(6) Rear panel (
6)
(7) Shutdown switch (
73)
(8) Lamp cover (
67)
The lamp unit is inside.
(9)
AC IN (AC inlet) (15)
(10) Power switch (
19,20)
(11) Security bar (
10)
(12) Security slot (
10)
(13) Dented part (x 2) (
3)
(14) Elevator feet (x 2) (
20)
HOT! : Do not touch around the lamp cover or the exhaust
vents during use or just after use, since it is hot.
►Do not look into the lens or vents while the lamp is on, since the strong light is
not good for your eyes.
►Do not grab the front cover or front ring to hold the projector, since you can
drop the projector.
►Do not handle the elevator feet without holding the projector, since the
projector may drop down.
WARNING
►Maintain normal ventilation to prevent the projector from
heating up. Do not cover, block or plug up the vents. Do not place anything that
can stick or be sucked to the vents, around the intake vents. Clean the air lter
periodically.
CAUTION
(2)
(3)
(8)
(10)
(9)
(12)
(14)
(4)
HOT!
(7)
(6)
(5)
(13)
(11)
(1)
HOT!
See the NOTICE
►Do not touch the lens surface directly.
► Keep the dust protector of the projector, and use it when no lens unit is
attached to the projector.
NOTICE
Front ring
Front cover
7
Part names
Remote control
(1) Laser pointer (18)
It is a beam outlet.
(2)
LASER INDICATOR (18)
(3)
LASER button (18)
(4)
STANDBY/ON button (19,20)
(5)
ID (1-4) button (18)
(6)
COMPUTER button (22)
(7)
VIDEO button (22)
(8)
DIGITAL button (22)
(9)
MY SOURCE button (22)
(10)
LENS SHIFT button (21)
(11)
ZOOM +/- button (21)
(12)
FOCUS +/- button (21)
(13)
AUTO button (23)
(14)
POSITION button (24)
(15)
ASPECT button (23)
(16)
KEYSTONE button (24)
(17)
MAGNIFY ON/OFF button (25)
(18)
FREEZE button (25)
(19)
BLANK button (26)
(20)
SHUTTER button (26)
(21)
MY BUTTON (1-4) button (49)
(22)
P by P button (27)
(23)
MENU button (28)
(24)
ENTER button : press the center point.
Cursor button: press the point ▲/▼/◄/► (
28).
(25)
RESET button (28)
(26) Wired remote control port (
18)
(27) Battery cover (
16)
(28) Battery holder (
16)
(29) Frequency switch (
17)
►Do not look into the beam outlet or
point the beam at people or pets while pressing the
LASER button, since the beam is not good for eyes.
WARNING
►Note that the laser beam may result
in hazardous radiation exposure. Use the laser pointer
only for pointing on the screen.
CAUTION
BLANK LASER
FREEZE
LASER
INDICATOR
DIGITAL
STANDBY/ON COMPUTER
LENS SHIFT
KEYSTONE
ID 3
ID 4
ID 2
ID 1
VIDEO
AUTO
ASPECT
RESET
MENU
MAGNIFY
ON
OFF
3
4
ENTER
FOCUS
+
-
POSITION
PbyP
ZOOM
+
-
1
2
MY BUTTON
MY SOURCE
SHUTTER
(4)
(2)
(1)
(3)
Back of
the remote control
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(14)
(15)
(16)
(17)
(18)
(19)
(20)
(21)
(22)
(23)
(24)
(25)
(26)
(27)
(28)
(29)
8
Setting up
Setting up
Read this chapter through  rst. Then install the projector into place.
►Do not place the product on an unstable surface such as an
uneven, tilted, or vibrating place.
►Do not place the product near water - for example, near a bathtub, washbowl,
kitchen sink, or laundry tub; in a wet basement, near a swimming pool, beach; or
outdoors.
WARNING
►Do not place the product in a dusty, smoky, or humid place -
for example, on a passage, in a smoking space, in a kitchen, or outdoors.
►Do not place the product near heat sources - for example, radiators, heat
registers, stoves, or other product (including ampli ers) that produces heat.
►Do not place this product in a magnetic  eld.
CAUTION
Installation environment
This product requires an installing place that is stable, cool and airy. Check your
installation environment in accordance with the following.
►Do not place the product in a place where radio interference may
be caused.
► Do not place the projector in a place where any strong lights hit the remote
sensors.
NOTICE
Projection style
This projector can be used by the following projection styles. Choose the style
suitable to your use.
(1) Standard style
(placed on a table)
(2) Ceiling mount
(suspended from a ceiling)
• In the case of ceiling mount, upward projection, or downward
projection, the speci ed mounting accessories ( 77 ) and service are required
to install the projector. Request them from your dealer. Ask your dealer for
installation other than styles above.
NOTE
►Consult with your dealer about installation beforehand.
►Use only the mounting accessories the manufacturer speci ed, and leave
installing and removing the projector with the mounting accessories to the
service personnel.
WARNING
10
Setting up
Supplementary anti-theft means
This projector has the security bar for a commercial
anti-theft chain or wire up to 10 mm in diameter, and
also the security slot for the Kensington lock.
For details, see the manual of your security tool.
►Do not use the security slot to
prevent the projector from falling down, since it is not
designed for it.
WARNING
These are not provided as comprehensive theft
preventions but supplemental measures.
NOTE
Security slot
Anti-theft chain or wire
Security bar
►Keep the projector away from anything that is easy to catch
re.
►Do not block or cover the openings on the projector, and keep sufciently
space for ventilation around the projector.
• Do not use the projector on a cushiony surface such a rug, a carpet or bedding.
• Keep the projector away from any light materials such as a piece of paper that
can stick to the intake holes.
►Do not use the projector on an unstable stand such as a cart.
►Place the projector so that nothing enters to the inside of the projector.
• Keep the projector away from any small things such as paperclips that can fall
into the inside.
• Keep the projector away from any liquids that can spill or leak into the product.
WARNING
►Keep the projector away from anything that is heat conductive
such as metal.
• Do not use the projector on a metallic table.
►Keep the projector away from anything that is weak in heat such as some kinds
of plastics.
CAUTION
►Place the projector so that there is nothing that blocks the
projection light to the screen.
Avoid exposing directly the remote sensor to any strong lights.
NOTICE
Placement
►Do not place the anti-theft chain
or wire near the projector’s exhaust vents, since the
chain or wire heated by the hot exhaust gas may
cause burns.
CAUTION
In placing the projector in place in accordance with the preceding section
"Projection distance" (9) heed the following too.
11
Setting up
Connecting with your devices
Before connecting the projector to your devices, check the manual of the device in
order to make sure that the device is suitable to connect with this projector and to
check what is required for the connection.
Consult your dealer when the required accessory did not come with the product or
the accessory is damaged. It may be regulated under some standard.
►Use only the accessories specied or recommended by
manufacturer. Modify neither a projector nor accessories.
►Do not connect or disconnect the projector with devices while they are
connected to a power supply except for the cases directed by the manuals of
devices.
WARNING
►Some connecting cable may have to have a specic length,
or a ferrite core at the end to connect to the projector, under the regulation of
electro-magnetic interference. When a ferrite core is attached to the specied
cable only at one end, connect to the projector the end that the ferrite core is
attached at.
►Be careful not to set a connector into a wrong port or with a wrong way.
►Be careful not to damage the cables. Route the cables not to be stepped on
and pinched out.
CAUTION
(continued on next page)
• For this product, the optional cable cover is ready to be purchased. To
place an order for it, please tell your dealer the type name of it (77).
NOTE
After making sure that the projector and the devices are turned off, perform
the connection, according to the following instructions. Refer to the gures in
subsequent pages.
►Do not turn your device on prior to the projector, except for the
cases directed by the manuals of devices.
NOTICE
12
Setting up
Control from the computer
HDMI
REMOTE
CONTROL
LAN
DVI-D
CONTROL IN CONTROL OUT
IN
OUT
S-VIDEO
VIDEO 1
COMPUTER IN1 COMPUTER IN2
MONITOR
OUT
BNC
VIDEO 2
R/Cr/Pr G/Y B/Cb/Pb H V
Y
Cb/Pb
Cr/Pr
K
HDMI
REMOTE
CONTROL
LAN
DVI-D
CONTROL IN CONTROL OUT
IN
OUT
S-VIDEO
VIDEO 1
COMPUTER IN1 COMPUTER IN2
MONITOR
OUT
BNC
VIDEO 2
R/Cr/Pr G/Y B/Cb/Pb H V
Y
Cb/Pb
Cr/Pr
K
HDMI
DVI-D
S-VIDEO
OUT
VIDEO
OUT
COMPONENT
Y Cb/Pb Cr/Pr
VIDEO
OUT
RS-232C
RGB OUT
RGB OUT RGB OUT
LAN
HDMI
REMOTE
CONTROL
LAN
DVI-D
CONTROL IN CONTROL OUT
IN
OUT
S-VIDEO
VIDEO 1
COMPUTER IN1 COMPUTER IN2
MONITOR
OUT
BNC
VIDEO 2
R/Cr/Pr G/Y B/Cb/Pb H V
Y
Cb/Pb
Cr/Pr
K
RS-232C
RGB OUT
BLANK LASER
FREEZE
LASER
INDICATOR
DIGITAL
STANDBY/ON COMPUTER
LENS SHIFT
KEYSTONE
ID 3
ID 4
ID 2
ID 1
VIDEO
AUTO
ASPECT
RESET
MENU
MAGNIFY
ON
OFF
3
4
ENTER
FOCUS
+
-
POSITION
PbyP
ZOOM
+
-
1
2
MY BUTTON
MY SOURCE
SHUTTER
REMOTE
CONTROL IN
RS-232C
RGB IN
(continued on next page)
Connecting your devices (continued)
Example of connecting with VCR or DVD players
HDMI
REMOTE
CONTROL
LAN
DVI-D
CONTROL IN CONTROL OUT
IN
OUT
S-VIDEO
VIDEO 1
COMPUTER IN1 COMPUTER IN2
MONITOR
OUT
BNC
VIDEO 2
R/Cr/Pr G/Y B/Cb/Pb H V
Y
Cb/Pb
Cr/Pr
K
HDMI
REMOTE
CONTROL
LAN
DVI-D
CONTROL IN CONTROL OUT
IN
OUT
S-VIDEO
VIDEO 1
COMPUTER IN1 COMPUTER IN2
MONITOR
OUT
BNC
VIDEO 2
R/Cr/Pr G/Y B/Cb/Pb H V
Y
Cb/Pb
Cr/Pr
K
HDMI
DVI-D
S-VIDEO
OUT
VIDEO
OUT
COMPONENT
Y Cb/Pb Cr/Pr
VIDEO
OUT
RS-232C
RGB OUT
RGB OUT RGB OUT
LAN
HDMI
REMOTE
CONTROL
LAN
DVI-D
CONTROL IN CONTROL OUT
IN
OUT
S-VIDEO
VIDEO 1
COMPUTER IN1 COMPUTER IN2
MONITOR
OUT
BNC
VIDEO 2
R/Cr/Pr G/Y B/Cb/Pb H V
Y
Cb/Pb
Cr/Pr
K
RS-232C
RGB OUT
BLANK LASER
FREEZE
LASER
INDICATOR
DIGITAL
STANDBY/ON COMPUTER
LENS SHIFT
KEYSTONE
ID 3
ID 4
ID 2
ID 1
VIDEO
AUTO
ASPECT
RESET
MENU
MAGNIFY
ON
OFF
3
4
ENTER
FOCUS
+
-
POSITION
PbyP
ZOOM
+
-
1
2
MY BUTTON
MY SOURCE
SHUTTER
REMOTE
CONTROL IN
RS-232C
RGB IN
Example of connecting with computers
►For safety,
do not connect the LAN port
to any network that might
have excessive voltage.
CAUTION
Digital signal input
Video signal input
Computer signal input
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Hitachi CP-WX11000 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Hitachi CP-WX11000 in de taal/talen: Engels als bijlage per email.

De handleiding is 7,46 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Hitachi CP-WX11000

Hitachi CP-WX11000 Gebruiksaanwijzing - Nederlands - 172 pagina's

Hitachi CP-WX11000 Gebruiksaanwijzing - Deutsch - 172 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info