505790
233
Verklein
Vergroot
Pagina terug
1/307
Pagina verder
26
Setting input ports using menu
5.3 Starting up Main projector
After performing section 5.2 Checking Main projector's operating status, the two
projectors are conrmed to have been set to ALTERNATE mode and the Sub
projector is currently operating. As the settings for Intellectual Stack can be
changed only when the Main projector is operating, this section explains how to
switch from the Sub projector to the Main projector.
1.
Use the /// buttons to go into the following menu.
ADVANCED MENU > OPTION
> SERVICE > COMMUNICATION > STACK
STACK menu will appear on screen.
(
Operating Guide OPTION menu)
2.
Check the ALTERNATE MODE setting in the menu.
If NORMAL is displayed, the two projectors are turned on alternately. Therefore,
the Main projector will be turned on if you restart the projectors.
(1)
Press the 67$1'%< button on the remote control or 67$1'%<21 button of
the Main projector. The Sub projector will turn off.
(2) After the projector has cooled down, press the 21 or 67$1'%<21 button to
turn on again. The Main projector will be turned on.
If AUTO is displayed, the projector with the least lamp usage is turned on.
Therefore, the Main projector may not be turned on even if you restart the
projectors. Follow the procedures below to turn on the Main projector.
(1) Use the / button to highlight STACK MODE, and press the button to
display the STACK MODE dialog.
(2) Use the / button to highlight OFF, and then press the button to complete
the setting. (
19
)
(3) Repeat the above procedures to display the STACK MODE dialog again.
(4) Use the / button to highlight SUB, and then press the button to
complete the setting. (
19
)
(5) After exiting the menu, wait for 10 seconds or more.
(6) Press the 67$1'%< button on the remote control or 67$1'%<21 button of
the Main projector. The Sub projector will turn off.
(7) After the projector has cooled down, press the 21 or 67$1'%<21 button to
turn on again. The Main projector will be turned on even if LAMP MODE has
been set to AUTO.
3.
You can change the settings for Intellectual Stack now that the Main projector
is operating. Go to
5.4 Setting the menu. (
27
)
NOTE • If the Main projector cannot be turned on due to error or certain
problems, the Sub projector will be turned on even if you follow the procedures
above. Take necessary actions to x the Main projector, and then change the
settings for Intellectual Stack.
233

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Hitachi CP-WU8450 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Hitachi CP-WU8450 in de taal/talen: Engels als bijlage per email.

De handleiding is 10,2 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Hitachi CP-WU8450

Hitachi CP-WU8450 Gebruiksaanwijzing - Nederlands - 307 pagina's

Hitachi CP-WU8450 Gebruiksaanwijzing - Deutsch - 307 pagina's

Hitachi CP-WU8450 Gebruiksaanwijzing - Français - 307 pagina's

Hitachi CP-WU8450 Gebruiksaanwijzing - Italiano - 307 pagina's

Hitachi CP-WU8450 Gebruiksaanwijzing - Português - 307 pagina's

Hitachi CP-WU8450 Gebruiksaanwijzing - Espanõl - 307 pagina's

Hitachi CP-WU8450 Gebruiksaanwijzing - Polski - 307 pagina's

Hitachi CP-WU8450 Gebruiksaanwijzing - Svenska - 307 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info