Handleiding Hitachi CP-AW252WN (pagina 1 van 70) (Engels)

505750

Verklein

Vergroot

Pagina terug

1/70

Pagina verder

Projector

User's Manual (detailed)

Network Guide

Thank you for purchasing this product.

This manual is intended to explain only the network function. For proper use of this

product, please refer to this manual and the other manuals for this product.

Features

This projector has the network function that brings you the following main features.

►Before using this product, be sure to read all manuals for this

product. After reading them, store them in a safe place for future reference.

WARNING

• The information in this manual is subject to change without notice.

• The manufacturer assumes no responsibility for any errors that may appear in

this manual.

• The reproduction, transfer or copy of all or any part of this document is not

permitted without express written consent.

NOTE

Trademark acknowledgment

ü Network Presentation : allows the projector to project computer images transmitted

through a network. (

&15)

ü Web Control : allows you to monitor and control the projector through a network from a

computer. (

&16)

ü My Image : allows the projector to store up to four still images and project them. (

&50)

ü Messenger : allows the projector to display text sent from a computer through a network.

(

&51)

ü Network Bridge : allows you to control an external device through the projector from a

computer. (

&52)

• Microsoft

, Internet Explorer

, Windows

, Windows Vista

and Aero

are registered

trademarks of Microsoft Corporation in the U.S. and/or other countries.

• Adobe

and Flash

are registered trademarks of Adobe Systems Incorporated.

• Pentium

is a registered trademark of Intel Corporation.

• JavaScript

is a registered trademark of Sun Microsystems, Inc.

• HDMI, the HDMI logo and High-Denition Multimedia Interface are trademarks or

registered trademarks of HDMI Licensing LLC in the United States and other countries.

• Crestron

, Crestron e-Control

, e-Control

, Crestron RoomView

and RoomView

are

trademarks or registered trademarks of Crestron Electronics, Inc. in

the United States and other countries.

• Trademark PJLink is a trademark applied for trademark rights in

Japan, the United States of America and other countries and areas.

All other trademarks are the properties of their respective owners.

CP-A222WN/CP-A302WN/CP-AW252WN/

CP-A352WN/CP-AW312WN

(Type nos. CP-A222WN, CP-A222WNM, CP-A302WN, CP-A302WNM, CP-AW252WN, CP-AW252WNM,

CP-A352WN, CP-A352WNM, CP-AW312WN, CP-AW312WNM)

Contents

Caution .......................................................................................... 4

1. Connection to the network ...................................................... 5

1.1 System requirements ................................................................................. 5

1.1.1 Required equipment preparation ..................................................................................... 5

1.1.2 Hardware and software requirement for computer .......................................................... 5

1.2 Manual network connection setting - Wired LAN -. ..................................... 7

1.2.1 Equipments connection .................................................................................................... 7

1.2.2 Network settings .............................................................................................................. 7

1.2.3 “Internet Option” setting ................................................................................................. 10

1.3 Manual network connection setting - Wireless LAN - ............................... 11

1.3.1 Preparation for wireless LAN connection ....................................................................... 11

1.3.2 Wireless LAN connection set up .................................................................................... 12

2. Network Presentation ............................................................. 15

3. Web Control ............................................................................ 16

3.1 Projector Web Control ............................................................................... 17

3.1.1 Logon ............................................................................................................................. 17

3.1.2 Network Information ....................................................................................................... 18

3.1.3 Network Settings ............................................................................................................ 19

3.1.4 Port Settings .................................................................................................................. 22

3.1.5 Mail Settings .................................................................................................................. 24

3.1.6 Alert Settings .................................................................................................................. 25

3.1.7 Schedule Settings .......................................................................................................... 27

3.1.8 Date/Time Settings ......................................................................................................... 30

3.1.9 Security Settings ............................................................................................................ 32

3.1.10 Projector Control .......................................................................................................... 33

3.1.11 Remote Control ............................................................................................................ 39

3.1.12 Projector Status ........................................................................................................... 40

3.1.13 Network Restart ........................................................................................................... 41

3.2 Crestron e-Control

.................................................................................. 42

3.2.1 Main window .................................................................................................................... 43

3.2.2 Tools window ................................................................................................................... 45

3.2.3 Info window ..................................................................................................................... 47

3.2.4 Help Desk window ........................................................................................................... 48

3.2.5 Emergency Alert .............................................................................................................. 49

4. My Image Function ................................................................. 50

5. Messenger Function ............................................................... 51

Contents

6. Network Bridge Function ....................................................... 52

6.1 Connecting devices .................................................................................. 52

6.2 Communication setup ............................................................................... 53

6.3 Communication port ................................................................................. 53

6.4 Transmission method ............................................................................... 54

6.4.1 HALF-DUPLEX .............................................................................................................. 54

6.4.2 FULL-DUPLEX ............................................................................................................... 55

7. Other Functions ...................................................................... 56

7.1 E-mail Alerts ............................................................................................. 56

7.2 Projector Management using SNMP ........................................................ 58

7.3 Event Scheduling ..................................................................................... 59

7.4 Command Control via the Network .......................................................... 62

7.5 Crestron RoomView

................................................................................. 67

8. Troubleshooting ..................................................................... 68

9. Specications ......................................................................... 69

10. Warranty and after-sales service ........................................ 70

Caution

To use the wireless network function of this projector, the designated USB wire-

less adapter that is sold as an option is required. For precautions according to the

standards and laws, refer to the documents that come with the adapter.

[Restriction on plugging and unplugging the USB wireless adapter]

Before you insert or pull out the USB wireless adapter from the projector, turn off

the power of the projector and pull out the power cord’s plug from the outlet. Do

not touch the USB wireless adapter that is connected to the projector while the

projector is receiving AC power.

Do not use any extension cable or device when connecting the adapter to the projector.

[Security precautions when using wireless LAN]

It is recommended that security settings, such as SSID and ENCRYPTION, are

specied when using wireless LAN communication. If the security settings are not

specied, the contents may be intercepted or it may cause unauthorized access

to the system. For details on wireless LAN security settings, refer to 3.1 Projector

Web Control or

&NETWORK menu in the Operating Guide.

►The optional IEEE802.11b/g/n USB wireless adapter uses

the 2.4GHz radio frequency band. You do not need a radio license to use the

adapter, but you should be aware of the following:

• DO NOT USE NEAR THE FOLLOWING!

• Microwave ovens

• Industrial, scientic or medical devices

• Designated low power radio stations

• Premises radio stations

Using the USB wireless adapter near the above may cause radio interference,

which would result in a decrease in transmission speed or interruption, and

even lead to malfunctioning of devices such as pacemakers.

•



Depending on the location where the USB wireless adapter is used, radio wave

interference may occur, which may result in a decrease in transmission speed

or interruption in communication.In particular, please be aware that using the

USB wireless adapter at locations where there is reinforced steel, other types

of metals or concrete is likely to cause radio wave interference.

• Available Channels

The USB wireless adapter uses the 2.4GHz radio frequency band, but

depending on the country or region you are in, the channels that you can use

might be limited. Please consult your dealer for information on the usable

channels.

• Bringing the optional USB wireless adapter out of the country or region you

reside in and using it there could lead to a violation of the radio laws of that

country or region.

CAUTION

1. Connection to the network

1.1 System requirements

1. Connection to the network

The following equipments are required to connect the projector to your computer

through the network.

■ Common The projector: 1 unit, Computer : minimum 1 set

■ Depending on how you want to connect

1) For the wired connection *1

LAN cable (CAT-5 or greater): 1 piece

2) For the wireless connection *2

- Projector side

IEEE802.11b/g/n USB wireless adapter (option : USB-WL-11N) : 1 unit

- Computer side

IEEE802.11 b/g/n wireless LAN equipment: 1 unit for each *3

To connect your computer to the projector and use the network function of the

projector, your computer needs to meet the following requirements.

1.1.1 Required equipment preparation

1.1.2 Hardware and software requirement for computer

ü OS: One of the following.

Windows

XP Home Edition /Professional Edition

Windows Vista

Home Basic /Home Premium /Business /Ultimate /Enterprise

(Service Pack 1 or later)

Windows

7 Starter /Home Basic /Home Premium /Professional /Ultimate /

Enterprise

ü CPU: Pentium 4 (2.8 GHz or higher)

ü Graphic card: 16 bit, XGA or higher

* When using the “LiveViewer” it is recommended that the display resolution of

your computer is set to 1024 x 768.

ü Memory: 512 MB or higher

ü Hard disk space: 100 MB or higher

ü Web browser: Internet Explorer

6.0 or higher

ü CD-ROM drive

*1: The system for using the network function of the projector requires

communication environment conforming 100Base-TX or 10Base-T.

*2: An access point is required when the wireless LAN connection is used as

Infrastructure mode.

*3: Depending on the type of wireless network device and computer you are using,

the projector may not be able to communicate properly with your computer,

even if the computer is equipped with a built-in wireless LAN function.

To eliminate communication problems, please use a Wi-Fi certied wireless

network device.

1. Connection to the network

1.1 System requirements (continued)

• The network communication control is disabled while the projector is

in standby mode if the STANDBY MODE item is set to SAVING. Please connect

the network communication to the projector after setting the STANDBY MODE

to NORMAL. (&SETUP menu in the Operating Guide)

• You can get the latest version of the applications for the network functions of

the projector and the latest information for this product from the Hitachi website.

(http://www.hitachi-america.us/projectors or http://www.hitachidigitalmedia.

com).

NOTE

1. Connection to the network

1.2 Manual network connection setting - Wired LAN -

This section explains how to set it up manually.

1.2.1 Equipments connection

Connect the projector and a computer with a LAN cable.

* Before connecting with an existing network, contact the network administrator.

Next, check the following computer settings.

1.2.2 Network settings

This is an explanation of network connection settings for Windows

1) Log on to Windows

7 as administrator authority. Administrator authority is the

account, which can access to all functions.

2) Open “Control Panel” from “Start” menu.

3) Open “View network status and tasks” in “Network and Internet”.

With the icons in the "Control Panel" window displayed, click "Network and

Sharing Center".

4) Click "Change adapter settings" in the menu

on the left side of the "Network and Sharing

Center" window.

(continued on next page)

1. Connection to the network

1.2 Manual network connection setting - Wired LAN - (continued)

7) Select "Use the following IP address" and congure the IP

address, Subnet mask and Default gateway for the computer

accordingly. If a DHCP server exists in the network, you

can select "Obtain an IP address automatically" and the IP

address will be assigned automatically.

After setting is complete, click [OK] to close the window.

5) Right-click "Local Area Connection" to open the menu,

and select "Properties".

6) Select "Internet Protocol Version 4 (TCP/IPv4)" and click

[Properties].

(continued on next page)

1. Connection to the network

1.2 Manual network connection setting - Wired LAN - (continued)

[About IP address]

■ Setting manually

The Network address portion of the IP address setting on your computer must

be the same as the setting on the projector. Also, the entire IP address on the

computer must not overlap with that of the other devices on the same network,

including the projector.

The projector’s settings are as follows.

IP address: 192.168.1.254

Subnet mask: 255.255.255.0

(Network address: 192.168.1 in this case)

Therefore, specify the computer’s IP address as follows.

IP address: 192.168.1.xxx (xxx shows decimal number.)

Subnet mask: 255.255.255.0

(Network address: 192.168.1 in this case)

For example

Select from 1 to 254 for “xxx” not duplicating with any other equipments.

In this case, since the IP address of the projector is “192.168.1.254”, specify a

setting between 1 to 253 for the computer.

• “0.0.0.0” cannot be set to the IP address.

• The projector’s IP address can be changed by using the conguration utility

via a web browser. (&21)

• If the projector and the computer exist in the same network (i.e., same

network address), you can leave the default gateway eld blank.

• When the projector and the computer exist in different networks, the default

gateway must be set. Consult to the network administrator in detail.

NOTE

■ Setting automatically

When a DHCP server exists in the connected network, it is possible to assign an

IP address to the projector and computer automatically.

* DHCP is abbreviation for “Dynamic Host Conguration Protocol” and has the

function to provide necessary setting for network like IP address from server to

client. A server that has DHCP function is called DHCP server.

(continued on next page)

1. Connection to the network

1.2 Manual network connection setting - Wired LAN - (continued)

2) Click “Connections” tab and then click [LAN settings] button

to open “Local Area Network (LAN) Settings”.

1.2.3 “Internet Option” setting

1) Click “Internet Options” in “Network and

Sharing Center” window to open “Internet

Properties” window.

3) Uncheck all boxes in “Local Area Network (LAN) Settings”

window.

After setting is complete, click [OK] to close the window.

1. Connection to the network

1.3

Manual network connection setting

Wireless LAN -

Using the designated USB wireless adapter (option) on the projector enables the

projector and computer to communicate in both the Ad-Hoc and Infrastructure

modes.

This section is intended to explain how to set up wireless LAN connection

manually.

1.3.1 Preparation for wireless LAN connection

* Ad-Hoc is one of the wireless LAN communication methods without having

access point to communicate.

* Infrastructure is one of the wireless LAN communication methods with having

access point to communicate. If certain quantities of equipments are used, this

mode is efcient.

If communicating with existing network, consult to your network administrator.

Fig. 1.3.1.a Without an access point communication (Ad-Hoc)

Fig. 1.3.1.b With an access point communication (Infrastructure)

First, insert the USB wireless adapter into the USB TYPE A port.

(& Connecting with your devices in the Operating Guide)

Then, set up the computer for wireless communication.

When the computer comes with a built-in IEEE802.11b/g/n wireless LAN device,

enable it and disable other network connections. If a wireless LAN device is not

built into the computer, connect an IEEE802.11b/g/n wireless LAN device and

install the device driver. For details, refer to the user's guide for the computer and

wireless LAN device.

1. Connection to the network

1.3.2 Wireless LAN connection set up

Using wireless LAN utility for Windows

7 standard.

Wireless LAN initial settings for the projector is as follows.

1.3 Manual network connection setting - Wireless LAN - (continued)

Connection Control : Ad-Hoc

SSID : wireless

Channel : 1

Encryption rating : None

IP address : 192.168.10.254

* You can change these settings via a web browser on your computer or from the

menu of the projector. Refer to the item 3.1.3 Network Settings (

&20) or

NETWORK menu in the Operating Guide.

1) Select "Change adapter settings" from the

menu on the left side of the "Network and

Sharing Center" window.

2) Right-click "Wireless Network Connection" to open the

menu, and select "Properties".

(continued on next page)

3) Select "Internet Protocol Version 4 (TCP/IPv4)" and click

[Properties].

1. Connection to the network

1.3 Manual network connection setting - Wireless LAN - (continued)

4) Select "Use the following IP address" and congure the IP

address, Subnet mask and Default gateway for the computer

accordingly.

After setting is complete, click [OK] to close the window.

(continued on next page)

[About IP address]

The Network address portion of the IP address setting on your computer must

be the same as the setting on the projector. Also, the entire IP address on the

computer must not overlap with that of the other devices on the same network,

including the projector.

The projector’s settings are as follows.

IP address: 192.168.10.254

Subnet mask: 255.255.255.0

(Network address: 192.168.10 in this case)

Therefore, specify the computer’s IP address as follows.

IP address: 192.168.10.xxx (xxx shows decimal number.)

Subnet mask: 255.255.255.0

(Network address: 192.168.10 in this case)

For example

Select from 1 to 254 for “xxx” not duplicating with any other equipments.

In this case, since the IP address of the projector is “192.168.10.254”, specify

a setting between 1 to 253 for the computer.

• “0.0.0.0” cannot be set to the IP address.

• The projector’s IP address can be changed by using the conguration utility

via a web browser. (&20)

• If the projector and the computer exist in the same network (i.e., same

network address), you can leave the default gateway eld blank.

• When the projector and the computer exist in different networks, the default

gateway must be set.

NOTE

1. Connection to the network

1.3 Manual network connection setting - Wireless LAN - (continued)

6) From the connectable wireless networks, select the SSID of the

projector (set to "wireless" by default), and click [Connect]. If

you have enabled encryption, a window asking for input of the

encryption key will be displayed. Input the preset key.

5) Right-click "Wireless Network Connection" to open

the menu, and select "Connect / Disconnect".

7) After connection is established, "Connected" will appear to the

right of SSID.

2. Network Presentation

The projector can display or play back the computer screen images and audio

data that are transmitted through the network. This Network Presentation feature

helps you to smoothly make your presentations and conduct conferences.

2. Network Presentation

To use Network Presentation, an exclusive application, "LiveViewer" is required.

It can be installed from the bundled application CD. You can also download the

latest version and relevant information from the Hitachi website (http://www.

hitachi-america.us/projectors or http://www.hitachidigitalmedia.com). For details

of Network Presentation and instructions to install the "LiveViewer", refer to the

manual for "LiveViewer".

Wired LAN

Wireless LAN

"LiveViewer" function use depends on the model you are using. If you want to use

the latest downloaded "LiveViewer", please refer for the appropriate group item in

the "LiveViewer" User's Manual.

This model will be in the Group of F

You can adjust or control the projector via a network from a web browser on a

computer that is connected to the same network.

• Internet Explorer

6.0 or later is required.

• If JavaScript

is disabled in your web browser conguration, you must enable

JavaScript

in order to use the projector web pages properly. See the Help les

for your web browser for details on how to enable JavaScript

• It is recommended that all web browser updates are installed.

• If data is transferred via wireless and wired LAN at the same time, the

projector may not be able to process the data correctly.

NOTE

3. Web Control

Refer to the following for conguring or controlling the projector via a web browser.

Make sure that your computer and the projector is connected via network, and

then start Web browser.

Enter the projector's IP address into URL input box of the Web browser as the

example below, and then press the Enter key or button.

Example: If the IP address of the projector is set to 192.168.1.10:

Enter “http://192.168.1.10/” into the address bar of the web browser

and press the Enter key or click

button.

If a correct URL is input, and the

projector and your computer are

connected to the same network

correctly, the selection window as

shown on the right will be displayed.

You can choose to use Projector Web

Control or Crestron e-Control

as a tool

for controlling the projector. Click one of

them.

For more details, refer to 3.1 Projector

Web Control (&17) or 3.2 Crestron

e-Control

(&42).

• If Crestron e-Control in the Network Settings (&21) is set to

Disable, the selection window above does not appear, but the Logon window of

the Projector Web Control is displayed.

• Crestron e-Control

is created using Flash

. You need to install Adobe

Flash

Player on your computer to use Crestron e-Control

NOTE

3. Web Control

3.1.1 Logon

To use the Projector Web Control function, you need

to logon with your user name and password.

• The language used on the Projector Web Control screen is the

same as that of the OSD on the projector. If you want to change it, you need

to change the OSD language on the projector. (&SCREEN menu in the

Operating Guide)

NOTE

Below are the factory default settings for user

name and password.

User name Administrator

Password <blank>

Enter your user name and password, and then click the [OK].

If you logon successfully, the screen below will be displayed.

Main menu

Click the desired operation or conguration item on the main menu.

3.1 Projector Web Control

Logon window

3.1.2 Network Information

Displays the projector’s current network

conguration settings.

Item Description

Common Information

Displays information common to both wireless and wired

LAN.

Projector Name Displays the projector name settings.

Wireless Information Displays the current settings of wireless LAN.

Mode Displays the mode of wireless LAN communication.

DHCP Displays the DHCP setting.

IP Address Displays the IP address.

Subnet Mask Displays the subnet mask.

Default Gateway Displays the default gateway.

DNS Server Address Displays the DNS server address.

MAC Address Displays the MAC address.

Ch Displays the channel used for wireless LAN.

Encryption Displays the data encryption setting.

SSID Displays the SSID used by the projector.

Speed Displays the current wireless LAN transmission speed.

Wired Information Displays the current wired LAN settings.

DHCP Displays the DHCP setting.

IP Address Displays the IP address.

Subnet Mask Displays the subnet mask.

Default Gateway Displays the default gateway.

DNS Server Address Displays the DNS server address.

MAC Address Displays the MAC address.

3. Web Control

3.1 Projector Web Control (continued)

3.1.3 Network Settings

Displays and congures network settings.

Item Description

Common Setup

Displays information common to both wireless and wired LAN.

Projector Name

Congures the name of the projector.

The length of the Projector Name can be up to 64

alphanumeric characters. Only alphabets, numbers and

following symbols can be used.

!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~ and space.

Particular projector name is pre-assigned by default.

sysLocation (SNMP)

Congures the location to be referred to when using SNMP.

The length of the sysLocation can be up to 255 alphanumeric

characters. Only numbers ‘0-9’ and alphabet ‘a-z’, ‘A-Z’ can

be used.

sysContact (SNMP)

Congures the contact information to be referred to when

using SNMP.

The length of the sysContact can be up to 255 alphanumeric

characters. Only numbers ‘0-9’ and alphabet ‘a-z’, ‘A-Z’ can

be used.

AMX D.D.

(AMX Device

Discovery)

Congures the AMX Device Discovery setting to detect the

projector from the controllers of AMX connected to the same

network. For the details of AMX Device Discovery, visit the

AMX web site.

URL: http://www.amx.com

(continued on next page)

3. Web Control

3.1 Projector Web Control (continued)

3.1 Projector Web Control - Network Settings (continued)

3. Web Control

Item Description

Wireless Setup Congures the wireless LAN settings.

Mode Select "Ad-Hoc" or "Infrastructure".

IP Conguration Congures network settings.

DHCP ON Enables DHCP.

DHCP OFF Disables DHCP.

IP Address Congures the IP address when DHCP is disabled.

Subnet Mask Congures the subnet mask when DHCP is disabled.

Default

Gateway

Congures the default gateway when DHCP is disabled.

DNS Server Address Congures the DNS server address.

Select a channel from “1” to “11” to use in the AD-HOC mode.

Encryption Select data encryption method.

WEP Key

Input the WEP key.

Either ASCII characters or hexadecimal numbers can be

used during WEP key input. However, you cannot use a

combination of both.The length of the key is dened as

follows according to the WEP and character formats.

Encryption ASCII characters HEX numbers

WEP 64bit 5 characters 10 characters

WEP 128bit 13 characters 26 characters

WPA Passphrase

Input WPA Passphrase.

Available number of input characters is 8 to 63. Only

alphabets, numbers and following symbols can be used.

!"#$%&'()*+,-./:;<=>?@ [\]^_`{|}~ and space

SSID

Select an SSID from the list.

If you require to set your unique SSID, select [Custom], then

set your own SSID following the rules below.

Maximum number of input characters is 32.

Only alphabets, numbers and following symbols can be used.

!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~ and space.

(continued on next page)

• Depending on the country where you are the

channels may vary. In addition, depending on the country

or region where you are, you may be required to use a

wireless network card that conrm to the standards in the

respective country or region.

NOTE

Click the [Apply] button to save the settings.

3.1 Projector Web Control - Network Settings (continued)

Item Description

Wired Setup Congures the wired LAN settings.

IP Conguration Congures network settings.

DHCP ON Enables DHCP.

DHCP OFF Disables DHCP.

IP Address Congures the IP address when DHCP is disabled.

Subnet Mask Congures the subnet mask when DHCP is disabled.

Default

Gateway

Congures the default gateway when DHCP is disabled.

DNS Server Address Congures the DNS server address.

Other Setup Congures other network settings.

Crestron e-Control

Set whether to or not to use Crestron e-Control

If you choose Disable, the Logon window of Projector Web

Control will be displayed at rst, but the selection window will

not appear.

3. Web Control

• The new conguration settings are activated after restarting the

network connection. When the conguration settings are changed, you must

restart the network connection. You can restart the network connection by

clicking [Network Restart] on the main menu (&41).

• If you connect the projector to an existing network, consult a network

administrator before setting server addresses.

• The WEP Key, WPA passphrase and SSID settings will not be set if the invalid

characters are used.

• The projector does not allow both wireless and wired LAN to be connected to

the same network. Do not set the same network address for both wireless and

wired LAN.

NOTE

3.1.4 Port Settings

Displays and congures communication port

settings.

Item Description

Network Control Port1

(Port:23)

Congures command control port 1 (Port:23).

Port open Click the [Enable] check box to use port 23.

Authentication

Click the [Enable] check box when authentication is required

for this port.

Network Control Port2

(Port:9715)

Congures command control port 2 (Port:9715).

Port open Click the [Enable] check box to use port 9715.

Authentication

Click the [Enable] check box when authentication is required

for this port.

PJLink

Port

(Port:4352)

Congures the PJLink

port (Port:4352).

Port open Click the [Enable] check box to use port 4352.

Authentication

Click the [Enable] check box when authentication is required

for this port.

My Image Port

(Port:9716)

Congures the My Image Port (Port:9716).

Port open Click the [Enable] check box to use port 9716.

Authentication

Click the [Enable] check box when authentication is required

for this port.

Messenger Port

(Port:9719)

Congures the Messenger Port (Port:9719).

Port open Click the [Enable] check box to use port 9719.

Authentication

Click the [Enable] check box when authentication is required

for this port.

(continued on next page)

3. Web Control

3.1 Projector Web Control (continued)

Item Description

SNMP Port Congures the SNMP port.

Port open Click the [Enable] check box to use SNMP.

Trap address

Congures the destination of the SNMP Trap in IP format.

• The address allows not only IP address but also domain

name if the valid DNS server is setup in the Network

Settings. The maximum length of host or domain name is up

to 255 characters.

Download MIB le Downloads a MIB le from the projector.

Network Bridge Port Congures the Bridge port number.

Port number

Input the port number.

Except for 41794, 9715, 9716, 9719, 9720, 5900, 5500, 4352

between 1024 and 65535 can be set up. It is set to 9717 as

the default setting.

Click the [Apply] button to save the settings.

3.1 Projector Web Control - Port Settings (continued)

• The new conguration settings are activated after restarting the

network connection. When the conguration settings are changed, you must

restart the network connection. You can restart the network connection by

clicking the [Network Restart] on the main menu(&41).

NOTE

3. Web Control

3.1.5 Mail Settings

Displays and congures e-mail addressing

settings.

Item Description

Send Mail

Click the [Enable] check box to use the e-mail function.

Congure the conditions for sending e-mail under the Alert

Settings.

SMTP Server Address

Congures the address of the mail server in IP format.

• The address allows not only IP address but also domain

name if the valid DNS server is setup in the Network

Settings. The maximum length of host or domain name is up

to 255 characters.

Sender E-mail address

Congures the sender e-mail address.

The length of the sender e-mail address can be up to 255

alphanumeric characters.

Recipient E-mail address

Congures the e-mail address of up to ve recipients. You

can also specify the [to] or [cc] for each address. The

length of the recipient e-mail address can be up to 255

alphanumeric characters.

Click the [Apply] button to save the settings.

• You can conrm whether the mail settings work correctly using the

[Send Test Mail] button. Please enable Send mail setting before clicking the

[Send Test Mail].

• If you connect the projector to an existing network, consult a network

administrator before setting server addresses.

NOTE

3. Web Control

3.1 Projector Web Control (continued)

3.1.6 Alert Settings

Displays and congures failure & alert settings.

Item Description

Cover Error The lamp cover has not been properly xed.

Fan Error The cooling fan is not operating.

Lamp Error

The lamp does not light, and there is a possibility that interior

portion has become heated.

Temp Error

There is a possibility that the interior portion has become

heated.

Lens Door Error The lens door is not opened or closed properly.

Air Flow Error The internal temperature is rising.

Cold Error

There is a possibility that the interior portion has become

overcooled.

Filter Error Filter time over.

Other Error

Other error.

If displaying this error, please contact your dealer.

Schedule Execution

Error

Schedule Execution error. (

&27

)

Lamp Time Alarm Lamp time over Alarm Time setting.

Filter Time Alarm Filter time over Alarm Time setting.

Transition Detector

Alarm

Transition Detector Alarm. (

SECURITY menu in the

Operating Guide)

Cold Start

When the projector is supplied with the power, it works as

below.

•

If the STANDBY MODE is set to the NORMAL:the projector's

power status changes from “OFF” to “Standby state”.

•

If the STANDBY MODE is set to the SAVING:the projector's power

status changes from “Standby state” to “ON (lamp is turned on)”.

(

SETUP menu in the Operating Guide)

Authentication Failure

The SNMP access is detected from the invalid SNMP community.

Refer to

Troubleshooting in the Operating Guide for further detailed

explanation of Error except Other Error and Schedule Execution Error.

3. Web Control

3.1 Projector Web Control (continued)

The Alert Items are shown below.

Item Description

Alarm Time

Congures the time to alert.

(Only Lamp Time Alarm and Filter Time Alarm.)

SNMP Trap Click the [Enable] check box to enable SNMP Trap alerts.

Send Mail

Click the [Enable] check box to enable e-mail alerts.

(Except Cold Start and Authentication Failure.)

Mail Subject

Congures the subject line of the e-mail to be sent.

The length of the subject line can be up to 100 alphanumeric

characters.

(Except Cold Start and Authentication Failure.)

Mail Text

Congures the text of the e-mail to be sent.

The length of the text can be up to 1024 alphanumeric

characters, but if you are using some of special characters

below the length may be shorter.

Special characters " ' : & , % \

and space

(Except Cold Start and Authentication Failure.)

Click the [Apply] button to save the settings.

• The trigger of Filter Error e-mail is depending on the FILTER

MESSAGE setting in the SERVICE item of the OPTION menu which denes

the period until the lter message is displayed on the projector screen. An

e-mail will be sent when the usage time of the lter exceeds the time limit that is

set. No notication e-mail will be sent if the FILTER MESSAGE is set to TURN

OFF. (&OPTION menu in the Operating Guide)

• Lamp Time Alarm is dened as a threshold for e-mail notication (reminder)

of the lamp time. When the lamp hour exceeds this threshold that is congured

in the Web page, the e-mail will be sent out.

• Filter Time Alarm is dened as a threshold for e-mail notication (reminder)

of the lter time. When the lter hour exceeds this threshold that is congured

in the Web page, the e-mail will be sent out.

NOTE

3.1 Projector Web Control - Alert Settings (continued)

3. Web Control

3.1.7 Schedule Settings

Displays and congures schedule settings.

Item Description

Daily Congures the daily schedule.

Sunday Congures the Sunday schedule.

Monday Congures the Monday schedule.

Tuesday Congures the Tuesday schedule.

Wednesday Congures the Wednesday schedule.

Thursday Congures the Thursday schedule.

Friday Congures the Friday schedule.

Saturday Congures the Saturday schedule.

Specic date No.1 Congures the specic date (No.1) schedule.

Specic date No.2 Congures the specic date (No.2) schedule.

Specic date No.3 Congures the specic date (No.3) schedule.

Specic date No.4 Congures the specic date (No.4) schedule.

Specic date No.5 Congures the specic date (No.5) schedule.

3. Web Control

3.1 Projector Web Control (continued)

3.1 Projector Web Control - Schedule Settings (continued)

The schedule settings are shown below.

Item Description

Schedule Click the [Enable] check box to enable the schedule.

Date (Month/Day)

Congures the month and date.

This item appears only when Specic date (No. 1-5) is

selected.

Click the [Apply] button to save the settings.

The current event settings are displayed on the schedule list. To add additional

functions and events, set the following items.

Item Description

Time Congures the time to execute commands.

Command

[Parameter]

Congures the commands to be executed.

Power Congures the parameters for power control.

Input Source Congures the parameters for input switching.

My Image Congures the parameters for My Image data display. (

&50)

Messenger Congures the parameters for Messenger data display. (

&51)

Slideshow Congures the Start/Stop parameters for the Slideshow.

Click the [Register] button to add new commands to the schedule list.

Click the [Delete] button to delete commands from the schedule list.

Click the [Reset] button to delete all commands and reset the schedule settings

from the schedule list.

3. Web Control

• After the projector is moved, check the date and time set for the

projector before conguring the schedules.

• The internal clock’s time may not remain accurate. Using SNTP is

recommended to maintain accurate time.

• Events “My Image” and “Messenger” will not be executed appropriately but

result in “schedule execution error” status in case lamp does not light or/and

display data are not stored in the projector at the scheduled event execution

time.

• Events “Input Source” and “My Image” will not be executed if security feature

is enabled and the projector is locked due to the feature.

• Certain error state in the projector (such as temperature error, lamp error) will

prevent the projector from appropriate execution of scheduled functions/events.

• If no USB memory device is inserted to the projector or no image data for

display exists at the scheduled event time, a schedule execution error occurs

against the scheduled Slideshow event.

• When you start the Slideshow, input source will be automatically switched to

the USB TYPE A port.

• Image les stored in the root directory of the USB memory device will be

displayed for the scheduled Slideshow.

• Please refer to

Troubleshooting in the Operating Guide in case

scheduled functions/events are not executed appropriately as you've set.

NOTE

3.1 Projector Web Control - Schedule Settings (continued)

3. Web Control

3.1.8 Date/Time Settings

Displays and congures the date and time

settings.

Item Description

Current Date Congures the current date in year/month/day format.

Current Time Congures the current time in hour:minute:second format.

Daylight Savings Time

Click the [ON] check box to enable daylight savings time and

set the following items.

Start Congures the date and time daylight savings time begins.

Month Congures the month daylight savings time begins (1~12).

Week

Congures the week of the month daylight savings time

begins (First, 2, 3, 4, Last).

Day

Congures the day of the week daylight savings time begins

(Sun, Mon, Tue, Wed, Thu, Fri, Sat).

Time

hour Congures the hour daylight savings time begins (0 ~ 23).

minute Congures the minute daylight savings time begins (0 ~ 59).

End Congures the date and time daylight savings time ends.

Month Congures the month daylight savings time ends (1 ~ 12).

Week

Congures the week of the month daylight savings time ends

(First, 2, 3, 4, Last).

Day

Congures the day of the week daylight savings time ends

(Sun, Mon, Tue, Wed, Thu, Fri, Sat).

Time

hour Congures the hour daylight savings time ends (0 ~ 23).

minute Congures the minute daylight savings time ends (0 ~ 59).

(continued on next page)

3. Web Control

3.1 Projector Web Control (continued)

Item Description

Time difference

Congures the time difference. Set the same time difference

as the one set on your computer. If unsure, consult your IT

manager.

SNTP

Click the [ON] check box to retrieve Date and Time

information from the SNTP server and set the following items.

SNTP Server Address

Congures the SNTP server address in IP format.

• The address allows not only IP address but also domain

name if the valid DNS server is setup in the Network

Settings. The maximum length of host or domain name is up

to 255 characters.

Cycle

Congures the interval at which to retrieve Date and Time

information from the SNTP server (hour:minute).

Click the [Apply] button to save the settings.

• The new conguration settings are activated after restarting the

network connection. When the conguration settings are changed, you must

restart the network connection. You can restart the network connection by

clicking the [Network Restart] on the main menu(&41).

• If you connect the projector to an existing network, consult a network

administrator before setting server addresses.

• Once you turn off the projector in the SAVING mode (&SETUP menu in the

Operating Guide) or the AC power, the current date and time setting is reset.

• To enable the SNTP function, the time difference must be set.

• The projector will retrieve Date and Time information from the time server and

override time settings when SNTP is enabled.

• The internal clock’s time may not remain accurate. Using SNTP is

recommended to maintain accurate time.

NOTE

3.1 Projector Web Control - Date/Time Settings (continued)

3. Web Control

3.1.9 Security Settings

Displays and congures passwords and other

security settings.

Item Description

User Account Congures the user name and password.

User name

Congures the user name.

The length of the text can be up to 32 alphanumeric

characters.

Password

Congures the password.

The length of the text can be up to 255 alphanumeric

characters.

Re-enter Password Reenter the above password for verication.

Network Control

Congures the Authentication password for Network Control

Port1 (Port: 23), Network Control Port2 (Port: 9715),

PJLink™ Port (Port: 4352), My Image Port (Port: 9716),

and Messenger Port (Port: 9719) (

&22, 23).

Authentication

Password

Congures the Authentication password.

The length of the text can be up to 32 alphanumeric

characters.

Re-enter

Authentication

Password

Reenter the above password for verication.

SNMP Congures the community name if SNMP is used.

Community name

Congures the community name. The length of the text can

be up to 64 alphanumeric characters.

Click the [Apply] button to save the settings.

• The new conguration settings are activated after restarting the

network connection. When the conguration settings are changed, you must

restart the network connection. You can restart the network connection by

clicking the [Network Restart] on the main menu(&41).

• Only numbers ‘0-9’ and alphabet ‘a-z’, ‘A-Z’ can be used.

NOTE

3. Web Control

3.1 Projector Web Control (continued)

3.1.10 Projector Control

Item Description

MAIN

POWER Turns the power on/off.

INPUT SOURCE Selects the input source.

PICTURE MODE Selects the picture mode setting.

BLANK ON/OFF Turns Blank on/off.

MUTE Turns Mute on/off.

FREEZE Turns Freeze on/off.

MAGNIFY

Controls the magnify setting.

In some input signal sources, it might stop “Magnify” even

though it does not reach to maximum setting value.

MAGNIFY POSITION V

Adjusts the vertical magnify position.

MAGNIFY POSITION H

Adjusts the horizontal magnify position.

TEMPLATE Turns template on/off.

MY IMAGE Selects MY IMAGE data.

MY IMAGE DELETE Deletes MY IMAGE data.

(continued on next page)

The items shown in the table below can be

performed using the Projector Control menu.

Select an item with the mouse.

Most of the items have a submenu. Refer to the

table below for details.

Controls the projector.

• The setting value may not match with the actual value if the user

changes the value manually. In that case, please refresh the page by clicking

the [Refresh] button.

NOTE

3. Web Control

3.1 Projector Web Control (continued)

3.1 Projector Web Control - Projector Control (continued)

Item Description

PICTURE

BRIGHTNESS Adjusts the brightness setting.

CONTRAST Adjusts the contrast setting.

GAMMA Selects the gamma setting.

COLOR TEMP Selects the color temperature setting.

COLOR Adjusts the color setting.

TINT Adjusts the tint setting.

SHARPNESS Adjusts the sharpness setting.

ACTIVE IRIS Selects the active iris setting.

MYMEMORY SAVE Saves the MyMemory data.

MYMEMORY RECALL Recalls the MyMemory data.

IMAGE

ASPECT Selects the aspect setting.

OVER SCAN Adjusts the over scan setting.

V POSITION Adjusts the vertical position.

H POSITION Adjusts the horizontal position.

H PHASE Adjusts the horizontal phase.

H SIZE Adjusts the horizontal size.

AUTO ADJUST

EXECUTE

Performs the automatic adjustment.

INPUT

PROGRESSIVE Selects the progressive setting.

VIDEO NR Selects the video noise reduction setting.

COLOR SPACE Selects the color space.

VIDEO FORMAT -

S-VIDEO

Selects the s-video format setting.

VIDEO FORMAT -

VIDEO

Selects the video format setting.

HDMI FORMAT Selects the HDMI

format setting.

HDMI RANGE Selects the HDMI

range setting.

COMPUTER IN -

COMPUTER IN1

Selects the COMPUTER IN1 input signal type.

COMPUTER IN -

COMPUTER IN2

Selects the COMPUTER IN2 input signal type.

FRAME LOCK -

COMPUTER IN1

Turns the FRAME LOCK-COMPUTER IN1 function on/off.

FRAME LOCK -

COMPUTER IN2

Turns the FRAME LOCK-COMPUTER IN2 function on/off.

FRAME LOCK - HDMI Turns the FRAME LOCK-HDMI function on/off.

(continued on next page)

3. Web Control

3.1 Projector Web Control - Projector Control (continued)

Item Description

SETUP

D-ZOOM Adjusts the zoom.

D-SHIFT V Adjusts the vertical picture position.

D-SHIFT H Adjusts the horizontal picture position.

PICTURE POSITION

(CP-A222WN,

CP-A302WN,

CP-A352WN)

Selects the vertical picture position.

PICT.POSIT.H

(CP-AW252WN,

CP-AW312WN)

Selects the horizontal picture position.

KEYSTONE V Adjusts the vertical keystone distortion setting.

KEYSTONE H Adjusts the horizontal keystone distortion setting.

PERFECT FIT

Adjusts the shape of the projected image in each of the

corners and sides.

AUTO ECO MODE Turns on/off the automatic eco mode function.

ECO MODE Selects the eco mode.

INSTALLATION Selects the installation status.

STANDBY MODE Selects the standby mode.

MONITOR OUT -

COMPUTER IN1

Assigns the MONITOR OUT when the COMPUTER IN1 input

port is selected.

MONITOR OUT -

COMPUTER IN2

Assigns the MONITOR OUT when the COMPUTER IN2 input

port is selected.

MONITOR OUT - LAN

Assigns the MONITOR OUT when the LAN input port is

selected.

MONITOR OUT -

USB TYPE A

Assigns the MONITOR OUT when the USB TYPE A input

port is selected.

MONITOR OUT -

USB TYPE B

Assigns the MONITOR OUT when the USB TYPE B input

port is selected.

MONITOR OUT -

HDMI

Assigns the MONITOR OUT when the HDMI input port is

selected.

MONITOR OUT -

S-VIDEO

Assigns the MONITOR OUT when the S-VIDEO input port is

selected.

MONITOR OUT -

VIDEO

Assigns the MONITOR OUT when the VIDEO input port is

selected.

MONITOR OUT -

STANDBY

Assigns the MONITOR OUT in the standby mode.

(continued on next page)

3. Web Control

3.1 Projector Web Control - Projector Control (continued)

3. Web Control

Item Description

AUDIO

VOLUME Adjusts the volume setting.

SPEAKER Turns the built-in speaker on/off.

AUDIO SOURCE -

COMPUTER IN1

Assigns the AUDIO SOURCE - COMPUTER IN1 input port.

AUDIO SOURCE -

COMPUTER IN2

Assigns the AUDIO SOURCE - COMPUTER IN2 input port.

AUDIO SOURCE - LAN Assigns the AUDIO SOURCE - LAN input port.

AUDIO SOURCE - USB

TYPE A

Assigns the AUDIO SOURCE - USB TYPE A input port.

AUDIO SOURCE - USB

TYPE B

Assigns the AUDIO SOURCE - USB TYPE B input port.

AUDIO SOURCE -

HDMI

Assigns the AUDIO SOURCE - HDMI input port.

AUDIO SOURCE -

S-VIDEO

Assigns the AUDIO SOURCE - S-VIDEO input port.

AUDIO SOURCE -

VIDEO

Assigns the AUDIO SOURCE - VIDEO input port.

AUDIO SOURCE -

STANDBY

Assigns the AUDIO SOURCE in the standby mode.

MIC LEVEL Selects the microphone level.

MIC VOLUME Adjusts the microphone volume setting.

SCREEN

LANGUAGE Selects the language for the OSD.

MENU POSITION V Adjusts the vertical Menu position.

MENU POSITION H Adjusts the horizontal Menu position.

BLANK Selects the Blank mode.

START UP Selects the start up screen mode.

MyScreen Lock Turns MyScreen lock function on/off.

MESSAGE Turns the message function on/off.

TEMPLATE Selects the template setting.

C.C. - DISPLAY Selects Closed Caption DISPLAY setting.

C.C. - MODE Selects Closed Caption MODE setting.

C.C. - CHANNEL Selects Closed Caption CHANNEL setting.

(continued on next page)

Item Description

OPTION

AUTO SEARCH Turns the automatic signal search function on/off.

DIRECT POWER ON Turns the direct power on function on/off.

AUTO POWER OFF

Congures the timer to shut off the projector when no signal

is detected.

USB TYPE B Selects the USB TYPE B setting.

MY BUTTON-1

Assigns the functions for the MY BUTTON-1 button on the

included remote control.

MY BUTTON-2

Assigns the functions for the MY BUTTON-2 button on the

included remote control.

MY SOURCE Selects the My Source setting.

REMOTE FREQ. -

NORMAL

Turns the remote control signal frequency normal function

on/off.

REMOTE FREQ. -

HIGH

Turns the remote control signal frequency high function on/

off.

(continued on next page)

3.1 Projector Web Control - Projector Control (continued)

3. Web Control

The items shown in the table below can be

performed using the Projector Control menu.

Click the [Quit Presenter Mode].

Item Description

SERVICE

Quit Presenter Mode Quit compulsorily from the Presenter mode.

3.1 Projector Web Control - Projector Control (continued)

3. Web Control

3.1.11 Remote Control

You can use your Web browser to control the

projector. The functions on the bundled remote

control are assigned to the Web Remote Control

screen.

• Do not attempt to control the projector with

the projector’s remote control and via your Web

browser at the same time. It may cause some

operational errors in the projector.

Item Description

POWER Assigned the same operation as STANDBY/ON button.

COMPUTER Assigned the same operation as COMPUTER button.

VIDEO Assigned the same operation as VIDEO button.

BLANK Assigned the same operation as BLANK button.

FREEZE Assigned the same operation as FREEZE button.

MUTE Assigned the same operation as MUTE button.

MENU Assigned the same operation as MENU button.

▲ Assigned the same operation as ▲ button.

▼ Assigned the same operation as ▼ button.

◄ Assigned the same operation as ◄ button.

► Assigned the same operation as ► button.

ENTER Assigned the same operation as ENTER button.

RESET Assigned the same operation as RESET button.

PAGE UP Assigned the same operation as PAGE UP button.

PAGE DOWN Assigned the same operation as PAGE DOWN button.

SLIDESHOW Starts the Slideshow.

3. Web Control

• The Web Remote Control does not support repeat function that

performs an action while holding a button clicked down.

• Since the repeat function is not available, click the button repeatedly as many

times as you require.

•

Even if you hold the button clicked down for a while, the Web Remote Control

sends your request command one time only. Release the button, then click it again.

•

When the [POWER] button is pushed, a message window comes up to conrm

the operation. To control the power, push [OK], otherwise push [Cancel].

• The [PAGE DOWN] and [PAGE UP] buttons on the Web Remote Control

cannot be used as mouse emulation function of the projector.

NOTE

3.1 Projector Web Control (continued)

3.1.12 Projector Status

Displays the settings and status of the projector.

Item Description

Error Status Displays the current error status

Lamp Time Displays the usage time for the current lamp.

Filter Time Displays the usage time for the current lter.

Power Status Displays the current power status.

Input Status Displays the current input signal source.

Blank On/Off Displays the current Blank on/off status.

Mute Displays the current Mute on/off status.

Freeze Displays the current Freeze status.

3. Web Control

3.1 Projector Web Control (continued)

3.1.13 Network Restart

Restarts the projector’s network connection.

Item Description

Restart

Restarts the projector’s network connection in order to

activate new conguration settings.

• Restarting requires you to re-log on in order to further control or

congure the projector via a web browser. Wait 30 seconds or more after

clicking the [Restart] button to log on again.

NOTE

3. Web Control

3.1 Projector Web Control (continued)

3. Web Control

The Main window as shown above is

displayed at rst. However, if you have

enabled User Password on the Tools window

(&46), a dialog prompting you to enter

the password as shown on the right will be

displayed, and no operation is enabled until

you have entered the password. After entering

the preset password, the dialog disappears

and the Main window will be displayed.

As shown below, you can open a window by

clicking the corresponding tab at the top right

of the window.

• If Crestron e-Control in the Network Settings (&21) is set to

Disable, Crestron e-Control

cannot be used to operate the projector. Enable

Crestron e-Control and close the web browser. Next, restart the web browser,

followed by entering the projector's IP address.

• Only English is supported on Crestron e-Control

• If the connection is terminated, the "Loading..." screen will appear. Check the

connection between the projector and the computer, then return or refresh the

Web page.

NOTE

3.2 Crestron e-Control

User Password dialog

Tab

Tab Description

Logout

Logs out from e-Control

This tab appears only when User Password of the Tools window is

enabled.

Tools Opens Tools window (

&45).

Info Opens Info window (

&47).

Contact IT Help Opens Help Desk window (

&48).

3. Web Control

3.2 Crestron e-Control

(continued)

3.2.1 Main window

You can operate the basic controls of the projector on this screen.

• If the projector is in the standby mode, only the Power button can be

operated.

NOTE

1 Click a button and operate as follows.

Button Description

Power Turns the power on/off.

Vol -/ Vol + Adjusts the volume setting.

Mute Turns Mute on/off.

2 Sources List

You can click a button to switch the input channel. The cursor will move

according to the currently selected input port.

Button Description

Computer in1 Selects input from COMPUTER IN1 port.

Computer in2 Selects input from COMPUTER IN2 port.

LAN Selects input from LAN port.

USB Type A Selects input from USB TYPE A port.

USB Type B Selects input from USB TYPE B port.

HDMI Selects input from HDMI port.

S-Video Selects input from S-VIDEO port.

Video Selects input from VIDEO port.

3. Web Control

3.2 Crestron e-Control

- Main window (continued)

3 Click a button and operate as follows. To show the hidden buttons, click the ◄ /

► icons at the left and right ends.

Button Description

Freeze Turns Freeze on/off.

Contrast Adjusts the contrast setting.

Brightness Adjusts the brightness setting.

Color Adjusts the color setting.

Sharpness Adjusts the sharpness setting.

Magnify

Controls the magnication setting using the [+] / [-] buttons.

Use the [▲] [▼] [◄] [►] buttons to move to the area you want

to magnify.

Auto Performs the automatic adjustment.

Blank Turns Blank on/off.

4 Click the button and operate in the same way as the bundled remote control.

Button Description

Menu Assigned the same operation as MENU button.

Enter Assigned the same operation as ENTER button.

Reset Assigned the same operation as RESET button.

▲ Assigned the same operation as ▲ button.

▼ Assigned the same operation as ▼ button.

◄ Assigned the same operation as ◄ button.

► Assigned the same operation as ► button.

3. Web Control

3.2 Crestron e-Control

(continued)

3.2.2 Tools window

Congures the settings between the projector and Crestron

control system.

Click the [Exit] button to return to the Main window.

1 Crestron Control

Congures the settings of Crestron

control system devices.

Item Description

IP Address Congures the IP address of the control system.

IP ID Congures the IP ID of the control system.

Port

Species the port number used for communication by the

control system.

To apply the settings, click the [Send] button.

2 Projector

Congures the network settings of the projector.

Item Description

Projector Name

Congures the name of the projector. The length of the

Projector Name can be up to 64 alphanumeric characters.

Location

Congures the location name of the projector. You can specify

a Location name up to 32 alphanumeric characters.

Assigned To:

Congures the user name for the projector. You can specify a

user name up to 32 alphanumeric characters.

The usable symbols are space and the following:

!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~

To apply the settings, click the [Send] button.

• If two-byte characters are used, the input text or numbers cannot be

set correctly.

• All items on this window cannot be left blank.

NOTE

3. Web Control

3.2 Crestron e-Control

- Tools window (continued)

3 Projector (continued)

Congures the network settings of the projector.

Item Description

DHCP Enables DHCP.

IP Address Congures the IP address when DHCP is disabled.

Subnet Mask Congures the subnet mask when DHCP is disabled.

Default Gateway Congures the default gateway when DHCP is disabled.

DNS Server Congures the DNS server address when DHCP is disabled.

To apply the settings, click the [Send] button.

4 User Password

Congures the User Password. To prompt the entry of User Password before

starting e-Control

, select the checkbox.

Item Description

New Password

Congures the password.

You can specify a password up to 26 alphanumeric characters.

The usable symbols are space and the following:

!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~

Conrm

Reenter the above password for verication. If the password is

incorrect, an error message is displayed.

To apply the settings, click the [Send] button.

5 Admin Password

Congures the Admin Password. To prompt the entry of Admin Password before

displaying the Tools window, select the checkbox.

Item Description

New Password

Congures the password.

You can specify a password up to 26 alphanumeric characters.

The usable symbols are space and the following:

!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~

Conrm

Reenter the above password for verication. If the password is

incorrect, an error message is displayed.

To apply the settings, click the [Send] button.

3. Web Control

3.2 Crestron e-Control

(continued)

3.2.3 Info window

Displays the settings and status of the projector.

Click the [Exit] button to return to the Main window.

1 Projector Information

Item Description

Projector Name Displays the projector name settings.

Location Displays the location name of the projector.

MAC Address Displays the wired LAN MAC address of the projector.

Resolution

Displays the resolution and vertical frequency of the signal

input selected on the projector.

Lamp Hours Displays the usage time for the current lamp.

Assigned To: Displays the user name for the projector.

2 Projector Status

Item Description

Power Status Displays the current power status.

Input Source Displays the current input signal source.

Picture Mode Displays the current picture mode setting.

Installation Displays the current installation setting.

Eco Mode Displays the current eco mode setting.

Error Status Displays the current error status.

1 2

• Projector Name, Location and the user name for Assigned To: may

appear truncated if they are too long.

NOTE

3. Web Control

3.2 Crestron e-Control

(continued)

3.2.4 Help Desk window

Sends/receives messages to/from the administrator for Crestron RoomView

Express.

Button Description

Send Sends a message.

Check the received message.

3. Web Control

3.2 Crestron e-Control

(continued)

3.2.5 Emergency Alert

When the administrator for Crestron RoomView

Express sends out an alert

message, it will be displayed on the screen.

You can reply to the alert message via a chat format. Input a message in the box

below the alert message, and click the [Send] button.

• For details of Emergency Alert, refer to the manual of Crestron

RoomView

Express.

• The alert message from Crestron RoomView

is displayed on the screen of

the projector in a way similar to the real-time text of the Messenger function

(&51). If another real-time text is currently being displayed, it will be overwritten

by the alert message. However, if the priority of the real-time text is set to high,

it will not be overwritten by the alert message, and the latter will not appear on

the screen of the projector. For details, refer to the manual for the application of

the Messenger.

NOTE

4. My Image Function

The projector can display still images that are transferred via the network.

• It is possible to allocate the image le up to 4 in the maximum.

• Using MY BUTTON that registered MY IMAGE can display transferred image.

(&OPTION menu in the Operating Guide)

• The image le also can be displayed by using schedule function from the web

browser. Refer to item 7.3 Event Scheduling (&59) in detail.

• If you display MY IMAGE data on screen while you are using the USB Display

function, the application for the USB Display will be closed. To restart the

application, exit the MY IMAGE function, and then the software in the projector,

LiveViewerLiteForUSB.exe, will run again. (&USB Display in the Operating

Guide)

• If data is transferred via wireless and wired LAN at the same time, the

projector may not be able to process the data correctly.

NOTE

Transfer image data

Display image data (ex.

)

MY IMAGE transmission requires an exclusive application for your computer.

Use the application to transfer the image data.

It can be downloaded from the Hitachi web site (http://www.hitachi-america.us/

projectors or http://www.hitachidigitalmedia.com).

For information on the necessary settings and operations for the computer and

projector, refer to the manual for the application.

To display the transferred image, select the MY IMAGE item in the NETWORK

menu. For more information, please see the description of the MY IMAGE item of

the NETWORK menu. (&NETWORK menu in the Operating Guide)

4. My Image Function

5. Messenger Function

The projector can display text data transferred via the network on the screen and

play back audio data inside the projector.

The text data can be displayed on the screen in two ways that displays the text

transferred from the computer on real time, and the other chooses and displays

the text data from the ones once stored in the projector.

• It is possible to store the text data up to 12 in the maximum.

• Using MY BUTTON that registered MESSENGER can turn the displaying

messenger text on/off. (&OPTION menu in the Operating Guide)

• The text le also can be displayed by using schedule function via the web

browser. Refer to item 7.3 Event Scheduling (&59) for the detail.

• If data is transferred via wireless and wired LAN at the same time, the

projector may not be able to process the data correctly.

NOTE

Transfer text data

Display text data (ex.

)

Messenger function requires an exclusive application for your computer. To

edit, transfer and display the text data, use the application. You can download

it from the Hitachi web site (http://www.hitachi-america.us/projectors or http://

www.hitachidigitalmedia.com). For information on the necessary settings and

operations for the computer and projector, refer to the manual for the application.

5. Messenger Function

6. Network Bridge Function

This projector is equipped with the NETWORK BRIDGE function to perform

mutual conversion of a network protocol and a serial interface.

By making use of the NETWORK BRIDGE function, a computer that is connected

to the projector via wireless or wired LAN is able to control an external device via

RS-232C communication using the projector as a network terminal.

6.1 Connecting devices

1) Connect the projector’s LAN port to the computer’s LAN port with a LAN

cable, or insert the USB wireless adapter into the USB TYPE A port.

2) Connect the projector’s CONTROL port and the device’s RS-232C port with

an RS-232C cable, for RS-232C communication.

• Before connecting the devices, read the manuals for the devices to

ensure the connection.

For RS-232C connection, check the specications of each port and use the

suitable cable. (&Connection to the ports in the Operating Guide - Technical)

NOTE

6. Network Bridge Function

RS-232C

RS-232C cable

CONTROL port

LAN port

External device

Wired LAN

LAN cable

Computer

Protocol change

TCP/IP data Serial data

USB TYPE A port

Wireless LAN

6. Network Bridge Function

6.2 Communication setup

6.3 Communication port

1) In the COMMUNICATION TYPE menu, select NETWORK BRIDGE

(WIRELESS or WIRED depending on the type of connection you use) for the

CONTROL port.

2) Using the SERIAL SETTINGS menu, select the proper baud rate and parity

for the CONTROL port, according to the specication of the RS-232C port of

the connected device.

For the NETWORK BRIDGE function, send the data from the computer to the

projector with using the Network Bridge Port that is congured in the Port

Settings of web browser. (

&23)

3) Using the TRANSMISSION METHOD menu, set up the proper method for the

CONTROL port according to your use.

• The OFF is selected for the COMMUNICATION TYPE as the default

setting.

• Using the COMMUNICATION menu, set up the communication. Remember

that an unsuitable setup could cause malfunction of communication.

• When either one of the NETWORK BRIDGE settings is selected in the

COMMUNICATION TYPE menu, RS-232C commands cannot be received from

the CONTROL port.

• Except for 41794, 9715, 9716, 9719, 9720, 5900, 5500, 4352

between 1024 and 65535 can be set up as the Network Bridge Port number.

It is set to 9717 as the default setting.

NOTE

Item Condition

BAUD RATE 4800bps/9600bps/19200bps/38400bps

PARITY NONE/ODD/EVEN

Data length 8 bit (xed)

Start bit 1 bit (xed)

Stop bit 1 bit (xed)

To congure the setup of the communication using NETWORK BRIDGE for

the projector, use items in the COMMUNICATION menu. Open the menu of

the projector and select the OPTION - SERVICE - COMMUNICATION menu.

(&OPTION menu > SERVICE > COMMUNICATION in the Operating Guide)

6.4 Transmission method

6.4.1 HALF-DUPLEX

The transmission method can be selected from the menus, only when the

NETWORK BRIDGE is selected for the COMMUNICATION TYPE.

(

&OPTION menu > SERVICE > COMMUNICATION in the Operating Guide)

HALF-DUPLEX  FULL-DUPLEX

This method lets the projector make two way communication, but only one

direction, either transmitting or receiving data, is allowed at a time.

The method does not allow the projector to receive the data from the computer

while waiting for response data from an external device. After the projector

receives the response data from an external device or the response limit time is

past, the projector can receive the data from the computer.

That means that the projector controls transmitting and receiving the data to

synchronize the communication.

To use the HALF-DUPLEX method, set up the RESPONSE LIMIT TIME following

the instructions below.

Using the RESPONSE LIMIT TIME menu, set the waiting time for response data

from an external device. (

&OPTION menu > SERVICE > COMMUNICATION

in the Operating Guide)

OFF  1s  2s  3s ( OFF)

6. Network Bridge Function

RS-232C

RS-232C cable

External device

Wired LAN

LAN cable

Computer

Protocol change

TCP/IP data Serial data

Transmitting data

Discarding data

Transmitting data

Response limit

time

Transmitting data

Response data

Wireless LAN

• With using the HALF-DUPLEX method, the projector can send out

254 byte data as maximum at once.

• If it is not required to monitor the response data from an external device and

the RESPONSE LIMIT TIME is set to OFF, the projector can receive the data

from the computer and send it out to an external device continuously.

The OFF is selected as the default setting.

• In case that the computer controls to synchronize transmitting

and receiving the data, it may not be able to control an external device well

depending on the processing status of the projector.

NOTE

6.4.2 FULL-DUPLEX

This method lets the projector make two way communication, transmitting and

receiving data at the same time, without monitoring response data from an

external device.

With using this method, the computer and an external device will send the data

out of synchronization. If it is required to synchronize them, set the computer to

make the synchronization.

6. Network Bridge Function

6.4 Transmission method (continued)

7. Other Functions

7.1 E-mail Alerts

The projector can automatically send an alert message to the specied e-mail

addresses when the projector detects a certain condition that is requiring

maintenance or detected an error.

• Up to ve e-mail addresses can be specied.

• The projector may be not able to send e-mail if the projector suddenly loses

power.

NOTE

Mail Settings (

&24)

To use the projector’s e-mail alert function, please congure the following items

through a web browser.

Example: If the IP address of the projector is set to 192.168.1.10:

1) Enter “http://192.168.1.10/” into the address bar of the web browser, and select

Projector Web Control from the selection window.

2) Enter your user name and password, and then click the [OK].

3) Click the [Mail Settings] and congure each item. Refer to item 3.1.5 Mail

Settings (

&24) for further information.

4) Click the [Apply] button to save the settings.

• Click the [Send Test Mail] button in the [Mail Settings] to conrm

that the e-mail settings are correct. The following mail will be delivered to the

specied addresses.

NOTE

Subject line :Test Mail <Projector name>

Text :Send Test Mail

Date <Testing date>

Time <Testing time>

IP Address <Projector IP address>

MAC Address <Projector MAC address>

7. Other Functions

7.1 E-mail Alerts (continued)

7. Other Functions

5) Click the [Alert Settings] on the main menu to congure the E-mail Alerts

settings.

6) Select and congure each alert item. Refer to item 3.1.6 Alert Settings (&25)

for further information.

7) Click the [Apply] button to save the settings.

Failure/Warning e-mails are formatted as follows:

Subject line : <Mail title> <Projector name>

Text : <Mail text>

Date <Failure/Warning date>

Time <Failure/Warning time>

IP Address <Projector IP address>

MAC Address <Projector MAC address>

7.2 Projector Management using SNMP

The SNMP (Simple Network Management Protocol) enables to manage the

projector information, which is a failure or warning status, from the computer on

the network. The SNMP management software will be required on the computer

to use this function.

• It is recommended that SNMP functions be carried out by a network

administrator.

• SNMP management software must be installed on the computer to monitor

the projector via SNMP.

• To use the downloaded MIB le, specify the le by your SNMP

manager.

NOTE

SNMP Settings (

&23)

Congure the following items via a web browser to use SNMP.

Example: If the IP address of the projector is set to 192.168.1.10:

1) Enter “http://192.168.1.10/” into the address bar of the web browser, and select

Projector Web Control from the selection window.

2) Enter your user name and password, and then click the [OK].

3) Click the [Port Settings] on the main menu.

4) Click the [Download MIB le] to download a MIB le.

5) Click the [Enable] check box to open the SNMP Port. Set the IP address to

send the SNMP trap to when a Failure/Warning occurs.

6) Click the [Security Settings] on the main menu.

7) Click the [SNMP] and set the community name on the screen that is displayed.

8) Congure the settings for Trap transmission of Failures/Warnings. Click the

[Alert Settings] on the main menu and select the Failure/Warning item to be

congured.

9) Click the [Enable] check box to send out the SNMP trap for Failures/Warnings.

Clear the [Enable] check box when SNMP trap transmission is not required.

10) Click the [Apply] button to save the settings.

7. Other Functions

• A Network Restart is required after the Community name has been

changed. Click the [Network Restart] and congure the following items.

NOTE

• A Network Restart is required after the SNMP Port conguration

settings have been changed. Click the [Network Restart] and congure the

following items.

NOTE

7.3 Event Scheduling

The scheduling function enables to setup scheduled events including power on /

power off. It enables to be “self-management” projector.

• You can schedule the following control events: Power, Input Source,

My Image, Messenger, Slideshow. (&28)

• The power on event has the lowest priority among the all events that are

dened at the same time.

• There are 3 types of Scheduling, 1) daily 2) weekly 3) specic date. (&27)

• The priority for scheduled events is as follows 1) specic date 2) weekly 3)

daily.

• Up to ve specic dates are available for scheduled events. Priority is given to

those with the lower numbers when more than one event has been scheduled

for the same date and time (e.g., ‘Specic date No. 1’ has priority over ‘Specic

date No. 2’ and so on.

• Be sure to set the date and time before enabling scheduled events. (

&30)

Once you turn off the projector in the SAVING mode (&SETUP menu in the

Operating Guide) or the AC power, the current date and time setting is reset.

NOTE

7. Other Functions

• In standby mode, the POWER indicator will ash green for approx. 3

seconds when at least 1 “Power ON” schedule is saved.

• When the schedule function is used, the power cord must be connected to the

projector and the outlet. The schedule function does not work when the breaker

in a room is tripped. The power indicator will lights orange or green when the

projector is receiving AC power.

NOTE

Schedule Settings (

&27)

7.3 Event Scheduling(continued)

Schedule settings can be congured from a web browser.

Example: If the IP address of the projector is set to 192.168.1.10:

1) Enter “http://192.168.1.10/” into the address bar of the web browser, and select

Projector Web Control from the selection window.

2) Enter your user name and password, and then click the [OK].

3) Click the [Schedule Settings] on the main menu and select the required

schedule item. For example, if you want to perform the command every

Sunday, please select the [Sunday].

4) Click the [Enable] check box to enable scheduling.

5) Enter the date (month/day) for specic date scheduling.

6) Click the [Apply] button to save the settings.

7) After congure the time, command and parameters, click the [Register] to add

the new event.

8) Click the [Delete] button when you want to delete a schedule.

There are three types of scheduling.

1) Daily: Perform the specied operation at a specied time every day.

2) Sunday ~ Saturday: Perform the specied operation at the specied time on a

specied day of the week.

3) Specic date: Perform the specied operation on the specied date and time.

7. Other Functions

7.3 Event Scheduling(continued)

Date/Time Settings (

&30)

• The internal clock’s time may not remain accurate. Using SNTP is

recommended to maintain accurate time (&31).

• Once you turn off the projector in the SAVING mode (&SETUP menu in the

Operating Guide) or the AC power, the current date and time setting is reset.

NOTE

The Date/Time setting can be adjusted via a web browser.

Example: If the IP address of the projector is set to 192.168.1.10:

1) Enter “http://192.168.1.10/” into the address bar of the web browser, and select

Projector Web Control from the selection window.

2) Enter your user name and password, and then click the [OK].

3) Click the [Date/Time Settings] on the main menu and congure each item.

Refer to item 3.1.8 Date/Time Settings (

&30) for further information.

4) Click the [Apply] button to save the settings.

7. Other Functions

7.4 Command Control via the Network

You can congure and control the projector via the network using RS-232C

commands.

Communication Port

The following two ports are assigned for the command control.

Command Control Settings (

&22)

4) Click the [Enable] check box to open Network Control Port1 (Port: 23) to use

TCP #23. Click the [Enable] check box for the [Authentication] setting when

authentication is required, otherwise clear the check box.

5) Click the [Enable] check box to open Network Control Port2 (Port: 9715) to

use TCP #9715. Click the [Enable] check box for the [Authentication] setting

when authentication is required, otherwise clear the check box.

6) Click the [Apply] button to save the settings.

Congure the following items from a web browser when command control is used.

Example: If the IP address of the projector is set to 192.168.1.10:

1) Enter “http://192.168.1.10/” into the address bar of the web browser, and select

Projector Web Control from the selection window.

2) Enter your user name and password, and then click the [OK].

3) Click the [Port Settings] on the main menu.

7. Other Functions

TCP #23 (Network Control Port1 (Port: 23))

TCP #9715 (Network Control Port2 (Port: 9715))

• Command control is available only via the specied port above.

NOTE

7.4 Command Control via the Network (continued)

When the authentication setting is enabled, the following settings are required.

(

&32)

7) Click the [Security Settings] on the main menu.

8) Click the [Network Control] and enter the desired authentication password.

* See NOTE.

9) Click the [Apply] button to save the settings.

NOTE

7. Other Functions

• The Authentication Password will be the same for Network Control

Port1 (Port: 23), Network Control Port2 (Port: 9715), PJLink™ Port (Port:

4352), My Image Port (Port: 9716) and Messenger Port (Port: 9719).

• The new conguration settings are activated after restarting the network

connection. When the conguration settings are changed, you must restart the

network connection. You can restart the network connection by clicking the

[Network Restart] on the main menu(&41).

Command Format

Command formats differ among the different communication ports.

● TCP #23

You can use the RS-232C commands without any changes. The reply data

format is the same as the RS-232C commands. (

RS-232C Communication

in the Operating Guide - Technical)

However, the following reply will be sent back in the event of authentication

failure when authentication is enabled.

Header Data length RS-232Ccommand Check Sum

Connection

0x02 0x0D 13 bytes 1 byte 1 byte

Reply Error code

0x1F 0x04 0x00

Header → 0x02, Fixed

Data length → RS-232C commands byte length (0x0D, Fixed)

RS-232C command → RS-232C commands that start with 0xBE 0xEF

(13 bytes)

Check Sum → This is the value to make zero on the addition of the

lower 8 bits from the header to the checksum.

Connection ID → Random value from 0 to 255 (This value is attached

to the reply data)

● TCP #9715

Send Data format

The following formatting is added to the header (0 x 02), Data length (0 x 0D),

Checksum (1 byte) and Connection ID (1 byte) of the RS-232C commands.

7. Other Functions

7.4 Command Control via the Network (continued)

Reply Data format

The connection ID (the data is same as the connection ID data on the sending

data format) is attached to the RS-232C commands reply data.

Connection

0x06 1 byte

Connection

0x15 1 byte

Reply Error code

Connection

0x1C 2 bytes 1 byte

Reply Data

Connection

0x1D 2 bytes 1 byte

Reply Status code

Connection

0x1F 2 bytes 1 byte

Authentication

Error code

Connection

0x1F 0x04 0x00 1 byte

7. Other Functions

7.4 Command Control via the Network (continued)

Automatic Connection Break

The TCP connection will be automatically disconnected after there is no

communication for 30 seconds after being established.

The projector does not accept commands without authentication success

when authentication is enabled. The projector uses a challenge response type

authentication with an MD5 (Message Digest 5) algorithm.

When the projector is using a LAN, a random 8 bytes will be returned if

authentication is enabled. Bind this received 8 bytes and the Authentication

Password and digest this data with the MD5 algorithm and add this in front of the

commands to send.

Following is a sample if the Authentication Password is set to “password” and the

random 8 bytes are “a572f60c”.

Authentication

1) Connect the projector.

2) Receive the random 8 bytes “a572f60c” from the projector.

3) Bind the random 8 bytes “a572f60c” and the Authentication Password

“password” and it becomes “a572f60cpassword”.

4) Digest this bind “a572f60cpassword” with MD5 algorithm.

It will be “e3d97429adffa11bce1f7275813d4bde”.

5) Add this “e3d97429adffa11bce1f7275813d4bde” in front of the commands

and send the data.

Send “e3d97429adffa11bce1f7275813d4bde”+command.

6) When the sending data is correct, the command will be performed and the

reply data will be returned. Otherwise, an authentication error will be returned.

• As for the transmission of the second or subsequent commands, the

authentication data can be omitted when the same connection.

NOTE

7. Other Functions

7.4 Command Control via the Network (continued)

7. Other Functions

7.5 Crestron RoomView

Crestron RoomView

is a multi-user resource management program provided

by Crestron Electronics, Inc. It is an application for managing and controlling the

projector and other AV devices collectively.

For details of Crestron RoomView

, refer to the Crestron

website.

URL: http://www.crestron.com

The following communication interfaces can be used to manage the entire facility.

1) Crestron RoomView

Express / Crestron RoomView

Server Edition

RoomViewTM Express and RoomViewTM Server Edition are software provided

by Crestron Electronics, Inc. They are used for managing all the AV devices,

and are also able to communicate with the help desk as well as send out alert

messages.

For details of the software, refer to the following website.

URL: http://www.crestron.com/getroomview

2) Crestron e-Control

Crestron e-Control

is a system controller that can be operated via a web

browser (&42).

8. Troubleshooting

Problem Likely Cause Things to Check

Reference

Page

Number

Can't communicate

Weak radio signal

• Bring the computer and

projector closer together.

• Radio waves won’t go

through concrete and metal

(steel doors, etc.)

–

Cannot communicate due

to congure wireless /

encryption settings.

If there is a wireless

conguration utility loaded

on your computer, check its

settings.

Please refer the manual of

your conguration utility.

–

The computer and/or

projector's network settings

are not congured correctly.

Check the network

configurations of the

computer and projector.

–

The same network address

is set for both wireless and

wired LAN.

Change the network address

setting for wireless or wired

LAN.

20, 21

The USB wireless adapter

is not inserted into the

projector.

Insert the optional USB

wireless adapter.

–

There is closely another

projector or other that has

the same wireless setting.

Try changing of SSID and IP

Address.

Others

- Information from

the projector

to computer is

not correct or

completed

- The projector does

not respond

Communication between the

projector and computer is not

working well.

NETWORK Functions of the

projector is not working well.

Try “NETWORK RESTART”

in SERVICE menu under the

NETWORK menu.

In the

Operating

Guide

Item Specifications

Control software Dedicated computer application and Web browser

Corresponding

protocol

TCP/IP, DHCP client and HTTP server

Network

Wireless LAN (IEEE802.11b/g/n)

(Ad-Hoc and Infrastructure modes)

Wired LAN(100Base-TX/10Base-T)

Security

WEP (64/128bit), WPA-PSK (TKIP/AES),

WPA2-PSK (TKIP/AES), SSID

Computer

application's system

requirements

OS: Windows

XP Home

Windows

XP Professional

Windows Vista

Home Basic

Windows Vista

Home Premium

Windows Vista

Business

Windows Vista

Ultimate

Windows Vista

Enterprise

Windows

7 Starter

Windows

7 Home Basic

Windows

7 Home Premium

Windows

7 Professional

Windows

7 Ultimate

Windows

7 Enterprise

CPU: Pentium 4 (2.8 GHz or higher)

Graphic card: 16 bit, XGA or higher

Memory: 512 MB or higher

Hard disk space: 100 MB or higher

Web browser: Internet Explorer

6.0 or higher

CD-ROM drive

USB wireless adapter Gemtek USB-Link11n

9. Specications

9. Specications

10. Warranty and after-sales service

If a problem occurs with the equipment, please read 8. Troubleshooting (&68)

section rst and review all suggested check points. After that, please contact your

dealer or service company, if you still have the problem. They will tell you what

warranty condition is applied.

Hitachi CP-AW252WN Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Hitachi CP-AW252WN

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info