565926
12
Verklein
Vergroot
Pagina terug
1/232
Pagina verder
12
GB
WARNING
z Do not grind with a cut-off wheel or put
pressure on the sides.
z Do not mount wheel if blotters are
damaged. Do not destroy cushioning
effect by making mounting bolts too tight.
Never fasten while applying your weight.
Otherwise the thread could be broken.
Proper torque is 20 N•m (200 kgf•cm).
z Examine wheel carefully before use. Do
not use if wheel is warped, damp, cracked,
chipped or cutting area shows heat
discoloration.
z A wheel once dropped cannot be trusted.
Discard a wheel if you drop it.
Refer to Chart
Wheel Blotters and Mounting Flanges
Wheel blotters attached to both sides of reinforced
wheels are cushions needed to equalize the
pressure of the mounting fl anges from wear if
slippage between the wheel and the fl anges
occurs. The blotters are 108 mm diameter. Take
care that the blotters do not become gouged or
deeply scratched and that there is no foreign
material on them when mounting the wheel.
Emergency Applications
The cutter has applications in fi re fi ghting and
rescue work. This unit, however, can cause
sparks and should not be used in an explosive
atmosphere or where it could start a fi re.
Ring Testing Wheels
Cracks or defects in a wheel may not be visible. To help in verifying that a
wheel is ok to use, a “ring test” must be made immediately before mounting
all new or used wheels.
Put your fi nger through the mounting hole to support the wheel. Use a non-
metallic handle of any small tool or a small piece of wood to lightly tap (do
not hit) the wheel in the locations shown in the illustration. Do not tap wheel
on the edge. Uncracked wheels will make a ringing sound, wheels with
cracks or concealed cracks will make a dull “clunk”.
IMPORTANT
If a wheel being “ring tested” is dirty or damp or
is tapped at the vertical center line, the resulting
sound will be muffl ed and not reliable.
“Tap” Here
Center Line
45°
45°
45°
Blotter 108 mm
20 mm
(22 mm)
355 mm
45°
Wheel Dimensions
Wheel Diameter
Mounting Hole
Diameter
Thickness
Abrasive Wheel: 355 mm
20 mm
(22 mm with Adapter)
4 mm
Diamond Wheel: 355 mm
20 mm
(22 mm with Adapter)
3 mm
CM14E_WE_all.indb 12CM14E_WE_all.indb 12 2008/02/05 21:09:312008/02/05 21:09:31
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Hitachi CM14E bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Hitachi CM14E in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans als bijlage per email.

De handleiding is 9,1 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info