54239
10
Verklein
Vergroot
Pagina terug
1/22
Pagina verder
GB - 9 -
Before Switching on your TV
Power connection
IMPORTANT: The TV set is designed to operate on
220-240V AC, 50 Hz.
After unpacking, allow the TV set to reach the ambient
room temperature before you connect the set to the
mains.
Aerial Connections
Connect the aerial plug to the aerial input socket lo-
cated at the back of the TV.
How to connect other devices
IMPORTANT: Switch off the TV before connecting any
external device.
Sockets for external connections are on the back of the
TV.
For connection of other devices via SCART connector
(or RCA Jack) refer to the manuals of the related de-
vices.
Inserting batteries in the remote control
handset
Remove the battery cover located on the back of the
handset by gently sliding it in the direction shown be-
low.
Insert two MN2400 AAA or equivalent type batteries
inside.
Replace the battery cover.
Note: Remove the batteries from the remote control
handset when it is not going to be used for a long time.
Otherwise it could be damaged if the batteries leak.
Switching the TV ON/OFF
You can operate your TV either using the remote
control handset or directly using the buttons on
the TV.
To switch the TV on
Your TV will switch on in two steps:
1- Press the power button located on the front of the TV.
Then the TV switches itself to standby mode and the
RED LED located below the TV turns on.
2- To switch on the TV from stand-by mode either:
Press a digit button on the remote control so that a pro-
gramme number is selected,
or,
Press Programme Up and Down buttons on the front of
the TV or on the remote control respectively, so the TV
will switch on and the RED Led will turn GREEN.
To switch the TV off
Press the stand-by button on the remote control, so
the TV will switch to stand-by mode and the GREEN
LED will become RED, or,
Press the power button located on the front of the
TV.
Operating the TV
You can operate your TV in two ways. First by using
the remote control handset and second by using
the controls on the TV.
APS (Automatic Programming System)
The Auto programming system automatically
programmes your TV according to the correct transmis-
sion system in your area.
When you turn on your TV for the first time, the "Auto
Setup'' menu will be displayed. In this menu if the lan-
guage setting is incorrect, use either
or but-
tons to highlight "Language'' and select the most suit-
able language using the
or buttons. Then use
either of the
or buttons to highlight "Country".
If the country setting is incorrect, use either of the
or
buttons to select the correct one. Finally use
or buttons to highlight " Start" and press ei-
ther of the
or buttons to start the "Auto-Pro-
gramming''. The "Auto-Programming system'' (APS)
can be cancelled by pressing the "TV'' button located on
the remote control handset.
When the APS has finished a table of stored stations will
be displayed on the screen with number 1 highlighted in
red. In the table you will see programme numbers and
names assigned to the stations, they will be listed in a
predetermined order.
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Hitachi CL28W440AN bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Hitachi CL28W440AN in de taal/talen: Engels als bijlage per email.

De handleiding is 1,39 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info