803206
29
Verklein
Vergroot
Pagina terug
1/36
Pagina verder
25
Testing method
Durability test
For the frame
Requirement
When testing by the method described in the "Test Method", the mark should be kept clear and
easy to read, the label should not be easy to remove, and there should be no signs of curling.
Wipe by hand with a cloth soaked in water for 15 seconds, and then wipe with a cloth soaked in
petroleum spirit for 15 seconds.
On easily visible parts, such as the position near the pedal crank, seat post or handlebar, clearly and persistently
mark a complete frame number;
Obviously and persistently mark the name of the manufacturer or manufacturer’s representative of the whole
electric-assisted bicycle and the number of this document, namely EN15194.; The durability test method is
specified in the "durability test". Where appropriate, if the electric assisted bicycle is equipped with a trailer
coupling device, the following values should be provided:
The total weight of the trailer;
The vertical load of the coupled system. Note: There are legal requirements for bicycle marking in some
countries. For components, there are currently no special requirements, but it is recommended that the following
critical safety components be clearly and permanently marked with traceable identities, such as the manufactur-
er’s name and part number:
Front fork
Handlebars and handle bars
Sea post
Brake lever, brake shoe and/or brake shoe bracket
Brake cable outer tube
Hydraulic brake hose
Disc brake calipers, brake discs, brake pads
Chain
Pedal and crank
Bottom bracket spindle
Rim
Warning 1 - Like all mechanical parts, electric assisted bicycles are subject to wear and high stress. Different
materials and components may respond differently to wear or stress fatigue. If the design life of the component
is exceeded, the component may suddenly fail, causing injury to the rider. Any form of cracks, scratches, or color
changes in high-stress areas indicates that the service life of the part has been reached and it should be
replaced.
Warning 2 - For composite parts, the user may not see the impact damage. The manufacturer should explain the
situation and consequences of the impact damage; composite parts should be returned to the manufacturer for
inspection or destruction and replacement.
The A-weighted sound pressure level at the rider’s ears should be less than 70 dB(A).
It is strictly prohibited to deliberately refit the bicycle or make unauthorized modifications to this bicycle.
The manufacturer/seller does not assume any responsibility for damage caused by modification by the user, and
it is recommended that the user seek professional help.
The child seat cannot be installed under the bicycle.
Never use a high-pressure cleaner to clean the bicycle.
For instructions on the minimum saddle height and size, please refer to the minimum insertion limit mark on the
seat post.
29

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Himo ZB20 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Himo ZB20 in de taal/talen: Engels als bijlage per email.

De handleiding is 0.93 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info