Network Video Recorder User Manual
69
If the power consumption of the DVR is lower than that of AF camera, when AF or AT
camera is connected, there is no video and “Insufficient Power for PoC” is overlaid on
the live view image.
If the power consumption of the DVR is higher than that of the AF camera and lower
than that of the AT camera, when AF camera is connected, it is powered on normally;
when AT camera is connected, it is powered on and then powered off, and there is no
video and “Insufficient Power for PoC” is overlaid on the live view image.
If the power consumption of the DVR is higher than that of the AT camera, when AF or
AT camera is connected, it is powered on normally.
Step 4 Check the connected AF or AT camera number and the connectable camera number.
PoC Status
Only Hikvision PoC camera is supported.
The maximum connectable AT/AF camera number varies with different models.
Please turn off the PoC function if the camera does not support PoC, or the camera is not
produced by Hikvision. Otherwise, it may result in permanent damage to the camera or DVR.
Configure Signal Input Channel
Purpose
You can configure the analog and IP signal input types.