629329
3
Verklein
Vergroot
Pagina terug
1/64
Pagina verder
DS-8100-S Series DVR
USER’S MANUAL
Hikvision Europe, Inc. DS-8100-S User Manual
3
TABLE OF CONTENTS
CHAPTER1 Introduction ................................................................................................................ 5
Overview ................................................................................................................................. 6
Preventive and Cautionary Tips .............................................................................................. 6
DVR Specifications ................................................................................................................. 6
Connecting Your DVR ............................................................................................................ 8
Operating Your DVR .............................................................................................................. 8
Using the Front Panel Controls ............................................................................................... 8
Using the IR Remote Control ................................................................................................ 10
Using a USB Mouse .............................................................................................................. 11
Using the Soft Keyboard ....................................................................................................... 12
CHAPTER2 Getting Started ......................................................................................................... 13
Starting and Shutting Down Your DVR ............................................................................... 14
Rebooting and Locking Your DVR ...................................................................................... 15
Setting Date & Time ............................................................................................................. 15
Checking the Status of Your DVR ........................................................................................ 17
CHAPTER3 Live Feed ................................................................................................................. 18
Watching a Live Feed ........................................................................................................... 19
Understanding Live Feed Icons............................................................................................. 19
Operating the Live Feed ........................................................................................................ 19
Using the Display Menu........................................................................................................ 22
Configuring Live Feed Displays ........................................................................................... 24
Setting Camera Order ............................................................................................................ 25
CHAPTER4 Record Settings ........................................................................................................ 26
Configuring Settings for Recording ...................................................................................... 27
Configuring Recording Settings ............................................................................................ 27
Configuring a Quick Recording Schedule............................................................................. 28
Configuring an Advanced Recording Schedule .................................................................... 29
CHAPTER5 Playback ................................................................................................................... 31
Playing Back a Recording ..................................................................................................... 32
Understanding the Playback Interface................................................................................... 32
Searching for Recorded Files ................................................................................................ 32
Playing Back Recorded Files ................................................................................................ 33
CHAPTER6 Backup ..................................................................................................................... 35
Backing Up Video Clips ....................................................................................................... 36
Selecting Video Clips ............................................................................................................ 36
Backing Up Video Clips ....................................................................................................... 37
Backing Up Recorded Files .................................................................................................. 38
CHAPTER7 System Configuration .............................................................................................. 39
Configuring Network Settings .............................................................................................. 40
Managing User Accounts ...................................................................................................... 41
Adding a New Remote User ................................................................................................. 41
Deleting a User...................................................................................................................... 42
Editing a User........................................................................................................................ 42
Configuring PTZ Cameras .................................................................................................... 43
Configuring Basic PTZ Settings ........................................................................................... 43
Customizing PTZ Presets, Patterns and Patrols .................................................................... 44
Configuring Alarms and Exceptions ..................................................................................... 46
Setting Up Motion Detection ................................................................................................ 46
Configuring Alarm Inputs ..................................................................................................... 47
Configuring Exceptions ........................................................................................................ 48
Configuring E-mail Settings ................................................................................................. 49
Hikvision Europe, Inc. DS-8100-S User Manual
5
CHAPTER1 Introduction
Hikvision Europe, Inc. DS-8100-S User Manual
6
Overview
Thank you for your purchase of the DS-8100-S series Digital Video Recorder (DVR). To get the most out of your
DVR, please read through the Installation’s Manual and this User’s Manual thoroughly.
The DS-8100-S series DVR, shown in Figure 1 ushers in the next generation of digital video recording technology
from Hikvision. Built on an embedded platform and combining the latest in advanced H.264 video encoding and
decoding technologies, the DS-8100-S contains the perfect combination of rock-solid reliability and high
performance. The DS-8100-S will only support analog-based cameras.
Preventive and Cautionary Tips
Before connecting and operating your DVR, please be advised of the following tips:
• Ensure unit is installed in a well-ventilated, dust-free environment.
• Unit is designed for indoor use only.
• Keep all liquids away from the DVR.
• Ensure environmental conditions meet factory specifications.
• Ensure unit is properly secured to a rack or shelf. Major shocks or jolts to the unit as a result of dropping it may cause
damage to the sensitive electronics within the unit.
• Use the DVR in conjunction with an Uninterruptible Power Supply (UPS).
• Power down the unit before connecting and disconnecting accessories and peripherals.
DVR Specifications
• Compression:
• Video encoding parameters of each channel can be set separately, including resolution, frame rate, picture quality.
• Each channel supports normal and event compression parameters.
• Supports both composite stream and video only stream. Audio and video streams are strictly synchronized.
• Local Functions (Monitoring):
High definition VGA display supports 1024*768 resolution.
• Supports 1/4/9/16 screen live view, channel sequence is adjustable.
• Support live view group switch, manual switch and automatic cycle, the interval of automatic cycle can be
adjusted.
Supports digital zoom on live view.
• Supports shielding of an assigned live view channel.
Supports motion detection, view tampering alert, video exception alert and video loss alert.
• Supports various PTZ protocols, PTZ preset, patrol and pattern.
• Supports multi-level user management, each user can have individual DVR access rights.
Supports mouse, front panel, IR control and Hikvision DS-1003KI keyboard
Local Functions (HDD Management):
• Supports up to 8 SATA HDD, each HDD can support max 2TB capacity.
• Supports S.M.A.R.T. technology.
• Supports HDD hibernation function.
• Supports Windows compatible file system format and technology of pre-allocating hard disk space to avoid HDD
fragments.
Recording and Playback:
• Supports continuous recording and recording on events
Supports 8 recording time periods with separate recording types.
Fig ure1. DS-8100-S
Hikvision Europe, Inc. DS-8100-S User Manual
7
• Supports pre/post-recording time for alarm and motion detection.
• Supports pause, play fast, play slow, skip forward, and skip backward when playback, locating in progress bar by
dragging the mouse.
DS-8100HCI-S supports up to 16-ch synchronous playback, DS-8100HDI-S supports up to 8-ch synchronous
playback and DS-8100HFI-S supports up to 4-ch synchronous playback.
• Backup:
• Supports USB storage device, SATA CD/DVD backup.
• Supports backup device maintenance and management.
Alarm & Exception:
• Unified management of DVR alarm input/output.
• Supports motion detection, network disconnect detection, video output standard mismatch detection, etc.
• Supports auto recovery from exceptions.
• Network:
8108HDI-S, 8116HDI-S and 8100HFI-S series DVR support 10/100/1000M adaptive network interface, and others
support 10/100M adaptive network interface..
• Supports TCP/IP protocols, DHCP, DNS, DDNS, NTP, and SADP, etc.
• Supports unicast and multicast, support TCP, UDP, and RTP for unicast.
• Supports remote search, playback and download video files.
• Supports remote configuration and import and export of DVR settings.
• Supports remote acquisition of device status, system log and alarm status.
• Supports remote format of hard disk, upgrade, reboot, shutdown.
• Supports event alarm and exceptions upload to remote management host.
Support remote user management. Administrator can create and manage remote users and set their privilege.
• Supports remote instantaneous JPEG capture.
• Supports remote PTZ control.
• Supports voice talk and broadcast.
• Includes built-in WEB Server.
• Development:
• SDK for Windows and Linux environment is available.
• Demo software source codes are available.
• Development support and training of application system are available.
Hikvision Europe, Inc. DS-8100-S User Manual
8
Connecting Your DVR
You may follow the diagram below (Figure 2) in connecting your DVR to its peripherals.
Operating Your DVR
There are numerous ways to navigate and operate your DVR. You may use the Front Panel Controls, the
included IR (Infra-Red) Remote, a Mouse and the Soft-Keyboard.
Using the Front Panel Controls
Your DVR comes with built-in front panel controls, as shown in Figure 3.
The controls on the front panel include:
1. Power Button: Powers DVR on/off.
2. IR Receiver: Receiver for IR remote.
3. USB Ports: Universal Serial Bus (USB) ports for additional devices such as USB mouse and USB Hard Disk
Drive (HDD).
4. Status Indicators: Status indicators for different features of the DVR.
Alarm: Alarm indicator turns red when a sensor alarm is detected.
Figure 3. DS-8100-S DVR Front Panel Control
Figure 2. DVR Connection Diagram
Hikvision Europe, Inc. DS-8100-S User Manual
9
Ready: Ready indicator turns blue when DVR is functioning properly.
Status: Status indicator turns blue when DVR is controlled by an IR remote. Indicator turns red when
controlled by a keyboard and purple when IR remote and keyboard is used at the same time.
HDD: HDD indicator blinks red when data is being read from or written to HDD.
Modem: Reserved
TX/RX: Network indictor blinks blue when network connection is functioning properly.
Guard: Guard indicator turns blue when the device is armed, off when the device is unarmed. The
arm/disarm state can be initiated by pressing and holding on the ESC button for more than 3 seconds in Preview
mode.
5. Alphanumeric Buttons: Alphanumeric buttons used in various menus of the DVR. Some uses include:
• Switching to the corresponding channel in Preview or PTZ Control mode.
• Inputting numbers and characters in Edit mode.
6. Control Buttons:
• ESC Button: The ESC button is used to escape to the previous menu and to arm/disarm the DVR in Preview
mode.
• REC/SHOT Button: The REC/SHOT button is used to enter the Quick Schedule Configuration interface. If
used when controlling a PTZ, pressing the REC/SHOT button and then a Numeric button will call a PTZ preset.
• PLAY/AUTO Button: The PLAY/AUTO button is used to enter the Playback menu. It is also used to turn
audio on/off in the Playback menu and auto scan in the PTZ Control menu.
ZOOM+ Button: The ZOOM+ button is used to zoom the PTZ camera in when in the PTZ Control menu.
A/FOCUS+ Button: The A/FOCUS+ button is used to adjust focus in the PTZ Control menu. It is also used to
switch between input methods (upper and lowercase alphabet, symbols and numeric input).
EDIT/IRIS+ Button: The EDIT/IRIS+ button is used to edit text fields. When editing text fields, it will also
function as a Backspace button to delete the character in front of the cursor. On checkbox fields, pressing the
EDIT/IRIS+ button will tick the checkbox. In PTZ Control mode, the EDIT/IRIS+ button opens up the iris of the
camera.
MENU/WIPER Button: Pressing the MENU/WIPER button will return the user to the Main menu (after
successful login). Pressing and holding the button for 5 seconds will turn off audible key beep. In PTZ Control
mode, the MENU/WIPER button will start wiper (if applicable).
F1/LIGHT Button: In PTZ Control mode, it will turn on/off PTZ light.
• F2/AUX Button: The F2/AUX button is used to cycle through tab pages.
• MAIN/SPOT/ZOOM- Button: The MAIN/SPOT/ZOOM- button is used to switch to the control of spot output.
In PTZ Control mode, it can be used to zoom the camera out.
PREV/FOCUS- Button: The PREV/FOCUS- button is used to switch between single screen and multi-screen
mode. In PTZ Control mode, it is used to adjust the focus in conjunction with the A/FOCUS+ button.
• PTZ/IRIS- Button: The PTZ/IRIS- button is used to enter the PTZ Control mode. When in the PTZ Control
mode, it is used to close the iris of the PTZ
7. DIRECTION/ENTER Buttons:
DIRECTION Buttons: The DIRECTION buttons are used to navigate between different fields and items in
menus. In Playback mode, the Up and Down button is used to speed up and slow down recorded video. In
Preview mode, these buttons can be used to cycle through channels.
• ENTER Button: The ENTER button is used to confirm selection in any off the menu modes. It can also be
used to tick checkbox fields. In Playback mode, it can be used to play or pause the video.
8. JOG SHUTTLE Control: The JOG SHUTTLE control can be used to move the active selection in a menu. The
ring will move the selection up and down. In the Playback mode, the inner ring is used to speed up and slow
down recorded video. In Preview mode, the ring can be used to cycle through channels.
9. CD/DVD Slot: This space is for internal CD/DVD writer
Note: If GUARD indicator is blue (default), all alarm event and exception settings are valid. Otherwise, alarm
event and exception settings will be invalid, but normal recording will still be available.
Note: It is important to note that you must click the EDIT button on either the remote or front panel on a text
field before you’re able to edit its content. After you’re done entering text, you must hit the ENTER button to be
able to move on to the next field.
Hikvision Europe, Inc. DS-8100-S User Manual
10
Using the IR Remote Control
Your DVR may also be controlled with the included IR remote control, shown in Figure 4. Batteries (2x AAA)
must be installed before operating.
Figure 4. IR Remote Control
Hikvision Europe, Inc. DS-8100-S User Manual
11
The keys on the remote control closely resemble the ones found on the front panel. Referring to Figure 4, they
include:
1. POWER Button: Same as POWER button on front panel (See page 8).
2. DEV Button: Enables/Disables Remote Control.
3. Alphanumeric Buttons: Same as Alphanumeric buttons on front panel (See page 9).
4. EDIT Button: Same as EDIT/IRIS+ button on front panel (See page 9).
5. A Button: Same as A/FOCUS+ button on front panel (See page 9).
6. REC Button: Same as REC/SHOT button on front panel (See page 9).
7. PLAY Button: Same as PLAY/AUTO button on front panel (See page 9).
8. INFO Button: Same as ZOOM+ button on front panel (See page 9).
9. VOIP Button: Same as MAIN/SPOT/ZOOM- button on front panel (See page 9).
10. MENU Button: Same as MENU/WIPER button on front panel (See page 9).
11. PREV Button: Same as PREV/FOCUS- button on front panel (See page 9).
12. DIRECTION/ENTER Buttons: Same as DIRECTION/ENTER buttons on front panel (See page 9).
13. PTZ Button: Same as PTZ/IRIS- button on front panel (See page 9).
14. ESC Button: Same as ESC button on front panel (See page 9).
15. RESERVED: Reserved.
16. F1 Button: Same as F1/LIGHT button on front panel (See page 9).
17. PTZ CONTROL Buttons: Buttons to adjust the iris, focus and zoom of a PTZ camera.
18. F2 Button: Same as F2/AUX button on front panel (See page 9).
Aim the remote control at the IR receiver located at the front of the unit to test operation. If there is no response:
1. Using the front control panel or the mouse, go into Main Menu > System Con-figuration> Display
configuration.
2. Check and remember DVR device No. The default ID# is 255. This ID# is valid for all IR controls.
3. Press the DEV button on the remote.
4. Enter the DVR ID# from step 2.
5. Press the ENTER button on the remote.
If the Status indicator on the front panel turns blue, the remote control is operating properly. If the Status
indicator does not turn blue and there is still no response from the remote, please check the following:
1. Batteries are installed correctly and the polarities of the batteries are not reversed.
2. Batteries are fresh and not out of charge.
3. IR receiver is not obstructed.
Using a USB Mouse
A regular 3-button (Left/Right/Scroll-wheel) USB mouse can also be used with this DVR. To use a USB mouse:
1. Plug USB mouse into one of the USB ports on the front panel of the DVR.
2. The mouse should automatically be detected. If in a rare case that the mouse is not detected, please refer to
the recommended device list from your provider.
The buttons on the mouse corresponds to:
1. Left Button:
• Single-Click: Select a component of a menu, such as a button or an input field. This is similar to pressing the
ENTER button on the remote/front panel controls.
Click and Drag: Clicking and dragging the Left mouse button can be used to control the pan/tilt of a PTZ
camera as well as to vary the amount of dig-ital zoom. It can also be used to setup the alarm areas.
2. Right Button:
• Single-Click: Shows pop-up menu.
3. Scroll-Wheel:
• Scroll Up: In Preview mode, scrolling up will switch to the previous screen. In Menu mode, it will move the
selection to the previous item.
• Scroll Down: In Preview mode, scrolling down will switch to the next screen. In Menu mode, it will move the
selection to the next item.
Hikvision Europe, Inc. DS-8100-S User Manual
12
Using the Soft Keyboard
When a mouse is used to perform task on the DVR, clicking on a text input field will bring up the Soft Keyboard,
shown in Figure 5.
Figure 5. Soft Keyboard
The buttons on the soft keyboard represents:
Switch to Lowercase: Switch to lowercase input
Switch to Uppercase: Switch to uppercase input
Symbols: Switch to symbols input.
Backspace: Delete the character in front of the cursor.
Enter: Confirm selection.
ESC: Exit out of Soft Keyboard.
Figure 6. Soft Keyboard Buttons
Hikvision Europe, Inc. DS-8100-S User Manual
13
CHAPTER2 Getting Started
Hikvision Europe, Inc. DS-8100-S User Manual
14
Starting and Shutting Down Your DVR
Proper startup and shutdown procedures are crucial to expanding the life of your DVR.
To startup your DVR:
1. Ensure the power supply is plugged into an electrical outlet. It is HIGHLY recommended that an
Uninterruptible Power Supply (UPS) be used in conjunction with the unit. The Power indicator LED on the front
panel should turn red, indicating the unit is receiving power.
2. Connect the DVR to a VGA monitor. You will only see the DVR menu system, when it’s connected to a VGA
monitor.
3. Press the POWER switch on the back rear panel. The Power indicator LED should turn blue. The unit will
begin to start.
4. After startup, the Power indicator LED will remain blue. A splash screen will be shown (Figure 7).
Figure 7. Startup Splash Screen
There are two proper ways to shutdown the DVR.
Option 1: Standard Shutdown
1. Enter the Shutdown menu shown in Figure 8 by going to Main Menu > Maintenance > Shutdown.
Figure 8. Shutdown Menu
2. Select the Shutdown button.
3. Click the Yes button.
• OPTION 2: Manual Shutdown
1. Press and hold the POWER button for 3 seconds.
Hikvision Europe, Inc. DS-8100-S User Manual
15
2. Enter the administrator’s username and password in the dialog box for authentication.
3. Click the Yes button.
Note: Do not press the POWER button again when the system is shutting down.
Rebooting and Locking Your DVR
While in the Shutdown menu (Figure 8), you may also reboot or lock your DVR. Locking your DVR will return you
to the Live Feed mode, which will require the correct administrator password to exit out of it. The Reboot button
will reboot your DVR.
To reboot or lock your DVR:
1. Enter the Shutdown menu by going to Main Menu > Maintenance > Shutdown.
2. Select the Lock button to lock the DVR or the Reboot button to reboot the DVR.
Setting Date & Time
It is extremely important to setup the system date and time to accurately timestamp recordings and events.
To setup date and time:
1. Enter the System Configuration menu by going to Main Menu > System Configuration, as shown in Figure 9.
Figure 9. System Configuration Menu
2. Click the Time/Date button to enter the Time/Date menu (Figure 10).
Hikvision Europe, Inc. DS-8100-S User Manual
16
Figure 10. Time / Date Menu
3. The current system time and date as well as the time zone will be displayed. Using the directional buttons on
the front panel/remote or the mouse, select the correct date, time and time zone.
4. To enable Daylight Savings Time, click and check the Enable DST checkbox.
5. To acquire the time and date over an NTP (Network Time Protocol) Server, check the Synchronize via NTP
server checkbox. You may enter your own NTP server or select from one of the default locations from the list of
servers, as shown in Figure 11.
Figure 11. Time / Date Menu
6. Click the Save button to save settings and click the Exit button to exit out of the menu. Clicking the Exit button
without clicking the Save button will exit the menu without saving.
Hikvision Europe, Inc. DS-8100-S User Manual
18
CHAPTER3 Live Feed
Hikvision Europe, Inc. DS-8100-S User Manual
26
CHAPTER4 Record Settings
Hikvision Europe, Inc. DS-8100-S User Manual
27
Configuring Settings for Recording
There are multiple ways to setup your DVR for recording. They include setting up a recording schedule,
triggering a recording by motion detection and/or a sensor alarm, and manually starting the recording.
Configuring Recording Settings
Before setting your DVR up for recording, certain settings should be configured first. These settings can be found
in the Recording Configuration menu, shown in Figure 21.
Figure 21. Recording Configuration Menu
The first set of settings to configure in this menu is the recording quality settings. To configure the recording
quality settings:
1. Enter the Recording Quality Settings menu by going to Main Menu > Recording Configuration > Recording
Quality Settings. The Recording Quality Settings menu is shown in Figure 22.
Figure 22. Recording Quality Settings Menu
2. Select the camera to configure in the camera drop down menu on the upper left of the menu. If all cameras
are to be configured with the same settings, select All Cameras from the list.
Hikvision Europe, Inc. DS-8100-S User Manual
30
Figure 25. Advanced Schedule Configuration Error Messages
8. Check the Enable Audio checkbox if you would like to enable audio recording along with the video. Audio
can only be recorded if an audio source (such as a microphone) is connected to the DVR.
9. Select the Add button to add time frame to schedule. The newly added time frame will appear in the
schedule on the left, with the schedule parameters shown on the right. Continuous recordings are shown in blue
on the schedule while event recordings are shown in yellow. An example of this can be seen in Figure 26.
Figure 26. Advanced Schedule Configuration Example
10. Repeat steps 4-10 to setup additional time periods for the selected day.
11. Select the Save button to save the schedule settings and select Exit to return to the previous menu.
Selecting the Exit button without clicking Save will quit out of the menu without saving settings.
Note: Creating a schedule in the Quick Schedule Configuration menu will also create a schedule in Advanced
Schedule Configuration. The quick schedule will show up as a time period in the Advanced Schedule
Configuration.
Hikvision Europe, Inc. DS-8100-S User Manual
42
Deleting a User
To delete a user from the DVR:
1. Enter the Remote User Settings menu, shown in Figure 38 by going to Main Menu > System Configuration >
Remote User Settings.
2. Select a user to delete in the Remote Users List panel.
3. Click the Remove button to delete user.
4. Click the OK button to confirm deletion of user.
5. Click the Done button to exit menu.
Editing a User
To edit a user:
1. Enter the Remote User Settings menu, shown in Figure 38 by going to Main Menu > System Configuration >
Remote User Settings
2. Select a user to edit in the Remote Users List panel.
3. Edit user information in the Users and Remote Permissions panel. Remote permissions are defined above in
Adding a New Remote User on page 41.
4. Click the Done button to exit menu.
Hikvision Europe, Inc. DS-8100-S User Manual
43
Configuring PTZ Cameras
Configuring Basic PTZ Settings
Settings for a PTZ camera must be configured before it can be used. Before proceeding verify that the PTZ and
RS-485 of the DVR are connected properly.
To configure PTZ settings:
1. Enter the PTZ Configuration menu, shown in Figure 39 by going to Main Menu > System Configuration >
PTZ Configuration.
Figure 39. PTZ Configuration Menu
2. Select the Serial Settings tab.
3. Select the camera to configure in the camera drop down menu on the upper left of the menu. If all cameras
are to be configured with the same settings, select All Cameras from the list.
4. Configure PTZ settings, including those of Baud Rate, Data Bit, Stop Bit, Parity, Flow Ctrl, Protocol and
Address according to the parameters of the PTZ camera(s).
5. Click the Save button to save current settings.
To test and verify PTZ settings:
1. Enter the PTZ Configuration menu, shown in Figure 39, by going to Main Menu > System Configuration >
PTZ Configuration.
2. Select the On Camera Settings tab. This will open up the On Camera Settings menu, shown in Figure 40.
Hikvision Europe, Inc. DS-8100-S User Manual
50
CHAPTER8 Camera Management
Hikvision Europe, Inc. DS-8100-S User Manual
51
Configuring Cameras
To setup privacy zones
1. Enter the Privacy Zones menu, shown in Figure 47 by going to Main Menu > Camera Setup > Privacy Zones.
Figure 47. Privacy Zones Menu
Privacy Zones Menu
2. Select the camera to setup privacy zones in using the camera drop down menu on the upper left of the menu.
If all cameras are to be configured with the same settings, select All Cameras from the list.
3. Click Enable Privacy Zones.
4. Up to four privacy zones can be used per camera and are shown using four different colors, yellow, green,
blue and pink. Using the mouse, click and drag out rectangular boxes defining the desired zones.
5. You may clear a privacy zone at any time by clicking on the corresponding Clear Zone button or Clear All
button to clear all zones.
6. Select the Save button to save the privacy zones settings and select Exit to return to the previous menu.
Selecting the Exit button without clicking Save will quit out of the menu without saving settings.
Hikvision Europe, Inc. DS-8100-S User Manual
52
Configuring Video Tampering Detection
Video tampering detection can be used to recognize if an area of a camera is purposely covered and to respond
accordingly.
To configure video tampering detection:
1. Enter the Video Tampering Detection menu, shown in Figure 48 by going to Main Menu > Camera Setup >
Video Tampering Detection.
Figure 48. Video Tampering Detection Menu
2. Select the camera to setup video tampering detection in using the camera drop down menu on the upper
left of the menu. If all cameras are to be configured with the same settings, select All Cameras from the list.
3. Click Enable Video Tampering Detection.
4. Adjust the Sensitivity for video tampering detection.
5. Using the mouse, select the region on the preview screen for where you would like to enable video
tampering detection on. Press the Clear button to clear region.
6. Select Actions to take if video tampering is detected. More than one action can be selected per channel.
These actions include:
• Sound Audio Warning: DVR will sound an audio warning if tampering is detected.
• Pop-up Image on Monitor: DVR will show the corresponding channel that is associated with the tampered
channel.
• Notify Surveillance Center: DVR will notify surveillance center when tampering is detected.
• Send Email: DVR will send an email out to the designated recipients when tampering is detected.
• Trigger Alarm Output: DVR will trigger alarm output when tampering is detected. Selecting this option will
enable the Alarm Output list, where the output to trigger can be selected.
7. Select the Save button to save the privacy zones settings and select Exit to return to the previous menu.
Selecting the Exit button without clicking Save will quit out of the menu without saving settings.
Hikvision Europe, Inc. DS-8100-S User Manual
53
Configuring Video Loss Detection
Video loss detection can be enabled on any of the channels on your DVR to detect the loss of video.
To configure video loss detection:
1. Enter the Video Loss Detection menu, shown in Figure 49 by going to Main Menu > Camera Setup > Video
Loss Detection.
Figure 49. Video Loss Detection Menu
2. Select the camera to setup video loss detection in using the camera drop down menu on the upper left of the
menu. If all cameras are to be configured with the same settings, select All Cameras from the list.
3. Click Enable Video Loss Detection.
4. Select Actions to take if video loss is detected. More than one action can be selected per channel. These
actions include:
• Sound Audio Warning: DVR will sound an audio warning if video loss is detected.
• Pop-up Image on Monitor: DVR will show the corresponding channel that is associated with the video loss
channel.
• Notify Surveillance Center: DVR will notify surveillance center when video loss is detected.
• Send Email: DVR will send an email out to the designated recipients when video loss is detected.
• Trigger Alarm Output: DVR will trigger alarm output when video loss is detected. Selecting this option will
enable the Alarm Output list, where the output to trigger can be selected.
5. Select the Save button to save the privacy zones settings and select Exit to return to the previous menu.
Selecting the Exit button without clicking Save will quit out of the menu without saving settings.
Hikvision Europe, Inc. DS-8100-S User Manual
58
Managing Files
Searching for Recorded Files
Previously recorded files can be searched by criteria in the File Management menu.
To search for recorded files:
1. Enter the File Management menu, shown in Figure 54 by going to Main Menu > System Configuration > File
Management.
Figure 54. File Management Menu
2. Select the cameras that you would like to include in the search. Analog cameras are listed on the first row,
preceded with the letter A.
3. Select the Start Time.
4. Select the End Time.
5. Select the Video Type. Video type includes Continuous and On Event recordings.
6. Select the File Type. File type includes Locked and Unlocked files.
7. Click the Search button or if you would like to search for only locked files, Search All Locked Files button.
8. A list of results with your search criteria will be shown at the bottom of the menu (Figure 55).
Figure 55. File Search Results
9. You may now play the selected file by clicking the Play button that is next to the file.
10. Click the Done button to exit out of the File Management menu.
Hikvision Europe, Inc. DS-8100-S User Manual
59
Locking and Unlocking Recorded Files
To Lock and unlock recorder files:
1. Search for recorded files using the File Management menu (See Searching for Recorded Files on page 32).
2. Select the file you would like to lock/unlock.
3. Click the Lock icon for the selected file.
4. Click the Done button to exit out of the File Management menu.
Note: Locked files will never be overwritten until they are unlocked.
Hikvision Europe, Inc. DS-8100-S User Manual
60
CHAPTER10 DVR Management
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Hikvision DS-8100 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Hikvision DS-8100 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,58 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Hikvision DS-8100

Hikvision DS-8100 Gebruiksaanwijzing - Nederlands - 54 pagina's

Hikvision DS-8100 Gebruiksaanwijzing - Français - 79 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info