731873
98
Verklein
Vergroot
Pagina terug
1/108
Pagina verder
DS-6900UDI Series
HD Video and Audio Decoder
User Manual
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
1
User Manual
COPYRIGHT ©2019 Hangzhou Hikvision Digital Technology Co., Ltd.
ALL RIGHTS RESERVED.
Any and all information, including, among others, wordings, pictures, graphs are the properties of
Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinafter referred to be
“Hikvision”). This user manual (hereinafter referred to be “the Manual”) cannot be reproduced,
changed, translated, or distributed, partially or wholly, by any means, without the prior written
permission of Hikvision. Unless otherwise stipulated, Hikvision does not make any warranties,
guarantees or representations, express or implied, regarding to the Manual.
About this Manual
This Manual is applicable to DS-6900UDI Decoder.
The Manual includes instructions for using and managing the product. Pictures, charts, images and
all other information hereinafter are for description and explanation only. The information
contained in the Manual is subject to change, without notice, due to firmware updates or other
reasons. Please find the latest version in the company website (http://overseas.hikvision.com/en/).
Please use this user manual under the guidance of professionals.
Trademarks Acknowledgement
and other Hikvision’s trademarks and logos are the properties of Hikvision in various
jurisdictions. Other trademarks and logos mentioned below are the properties of their respective
owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH ITS
HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND ERRORS,
AND HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,
MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-
INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL HIKVISION, ITS DIRECTORS, OFFICERS,
EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR
INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS,
BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE
USE OF THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY
AT YOUR OWN RISKS. HIKVISION SHALL NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL
OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER
ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL
PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR
JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS
THE APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED
WITH ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER
PREVAILS.
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
2
Regulatory information
FCC information
Please take attention that changes or modification not expressly approved by the party responsible
for compliance could void the users authority to operate the equipment.
FCC compliance: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the interference at his
own expense.
FCC conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause
undesired operation.
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked with "CE" and
comply therefore with the applicable harmonized European standards listed under the
EMC Directive 2014/30/EU, the LVD Directive 2014/35/EU, the RoHS Directive
2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of
as unsorted municipal waste in the European Union. For proper recycling, return this
product to your local supplier upon the purchase of equivalent new equipment, or
dispose of it at designated collection points. For more information see: www.recyclethis.info
2006/66/EC (battery directive): This product contains a battery that cannot be disposed
of as unsorted municipal waste in the European Union. See the product documentation
for specific battery information. The battery is marked with this symbol, which may
include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return
the battery to your supplier or to a designated collection point. For more information see:
www.recyclethis.info
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
3
Applicable Model
Series
Model
DS-6900UDI Decoder
DS-6901UDI
DS-6904UDI
DS-6908UDI
DS-6910UDI
DS-6912UDI
DS-6916UDI
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol
Description
Provides additional information to emphasize or
supplement important points of the main text.
Indicates a potentially hazardous situation, which
if not avoided, could result in equipment
damage, data loss, performance degradation, or
unexpected results.
Indicates a hazard with a high level of risk, which
if not avoided, will result in death or serious
injury.
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
4
Safety Instructions
Proper configuration of all passwords and other security settings is the responsibility of the
installer and/or end-user.
In the use of the product, you must be in strict compliance with the electrical safety
regulations of the nation and region. Please refer to technical specifications for detailed
information.
Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power
Source with 100 to 240 VAC or 12 VDC according to the IEC60950-1 standard. Please refer to
technical specifications for detailed information.
Do not connect several devices to one power adapter as adapter overload may cause over-
heating or a fire hazard.
Please make sure that the plug is firmly connected to the power socket.
If smoke, odor or noise rise from the device, turn off the power at once and unplug the power
cable, and then please contact the service center.
Preventive and Cautionary Tips
Before connecting and operating your device, be advised of the following tips:
Ensure unit is installed in a well-ventilated, dust-free environment.
Unit is designed for indoor use only.
Keep all liquids away from the device.
Ensure environmental conditions meet factory specifications.
Ensure unit is properly secured to a rack or shelf. Major shocks or jolts to the unit as a result of
dropping it may cause damage to the sensitive electronics within the unit.
Use the device in conjunction with an UPS if possible.
Power down the unit before connecting and disconnecting accessories and peripherals.
Improper use or replacement of the battery may result in explosion. Replace with the same or
equivalent type only. Dispose of used batteries according to the instructions provided by the
battery manufacturer.
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
5
Table of Contents
Introduction ................................................................................................................ 1
Description .................................................................................................................... 1
Features ......................................................................................................................... 1
Panels and Connections ............................................................................................. 3
Front Panel .................................................................................................................... 3
Rear Panel...................................................................................................................... 5
Device Activation ....................................................................................................... 8
Activating via SADP Software ......................................................................................... 8
Activating via Web Browser ........................................................................................... 9
Activating via Client Software....................................................................................... 10
Network Configuration ........................................................................................... 13
Configuring Basic Network Settings .............................................................................. 14
Configuring DDNS Settings ........................................................................................... 15
Configuring Security Control ........................................................................................ 17
Decoding Parameters Configuration ...................................................................... 19
Configuring Stream Settings ......................................................................................... 19
Configuring Transparent Channel ................................................................................. 19
Configuring Synchronous Output Settings .................................................................... 20
Configuring Personalized Settings ................................................................................ 21
Decoding Operation ................................................................................................. 23
Configuring Encoding Devices ...................................................................................... 23
Adding an Encoding Device ................................................................................. 23
Modifying an Encoding Device ............................................................................ 26
Deleting an Encoding Device ............................................................................... 27
Configuring Video Wall ................................................................................................ 27
Configuring Decoding Output....................................................................................... 28
Configuring BNC Output ...................................................................................... 29
Configuring HDMI Output ................................................................................... 30
Decoding Video on Video Wall ..................................................................................... 32
Interface Description ........................................................................................... 32
Dragging Channels to the Video Wall................................................................... 33
Openning Window via Coordinate ....................................................................... 34
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
6
Managing Decoding ............................................................................................ 36
Switching Encoding Channel ................................................................................ 38
Configuring Auto-Switch of Cameras ................................................................... 39
Roaming Window ................................................................................................ 39
Zooming in/out Roaming Windows ..................................................................... 40
Configuring Scene ............................................................................................... 42
User Management .................................................................................................... 44
System Configuration .............................................................................................. 46
Checking Device Information ....................................................................................... 46
Configuring Time Settings ............................................................................................ 46
Configuring RS-232 Serial Port ..................................................................................... 48
Configure RS-485 Serial Port ........................................................................................ 49
System Maintenance................................................................................................. 50
Importing Configuration Files ....................................................................................... 50
Exporting Configuration Files ....................................................................................... 50
Upgrading the Device ................................................................................................... 51
Restoring the Default Settings ...................................................................................... 51
Rebooting the Device ................................................................................................... 51
Decoder Configuration and Operation by Client Software ................................ 52
Interface Description ................................................................................................. 52
Adding an Encoding/Decoding Device ........................................................................ 53
Configuring Video Wall .............................................................................................. 55
Adding a Video Wall .......................................................................................... 55
Modifying a Video Wall ..................................................................................... 56
Deleting a Video Wall ........................................................................................ 56
Configuring Virtual Screen ................................................................................. 57
Configuring Decoding Parameters .............................................................................. 59
Configuring Decoding Output ..................................................................................... 60
Configuring BNC Output .................................................................................... 60
Configuring HDMI Output.................................................................................. 62
Operating Decoding ................................................................................................... 63
Dragging Channels to the Video Wall ................................................................. 63
Opening Window for Non-LED Screen ............................................................... 64
Opening Window for LED Screen ....................................................................... 64
Managing Decoding .......................................................................................... 65
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
7
Configuring Auto-Switch Decoding .................................................................... 66
PTZ Control ....................................................................................................... 67
Playback ............................................................................................................ 67
Configuring Scene ............................................................................................. 69
Configuring Window ......................................................................................... 70
Decoding Thermal Network Camera .......................................................................... 71
Configuring the Thermal Network Camera Parameters ...................................... 71
Decoding Thermal Network Camera on the Video Wall ..................................... 79
Controlling Remote Screen......................................................................................... 80
Configuring the RSC Server ................................................................................ 81
Controlling Remote Screen via RSC Server ......................................................... 82
Remote Configuration ................................................................................................ 85
Configuring Ethernet Channel ........................................................................... 85
Stream Media Server Configuration ......................................................................... 86
Installing Stream Media Server ........................................................................ 86
Running Stream Media Server ......................................................................... 87
Adding Stream Media Server ........................................................................... 87
Configuring Stream Media Server .................................................................... 88
Appendix ................................................................................................................. 94
Specifications ............................................................................................................. 94
FAQ ............................................................................................................................ 98
List of Third-Party IP Cameras Access ......................................................................... 99
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
1
Introduction
Description
Designed for the high-definition video monitoring system, DS-6900UDI Decoder is developed on
the basis of embedded hardware platform, ensuring high reliability and stability of system running.
DS-6900UDI Decoder is capable of simultaneous decoding video for 8-ch@24MP, 16-ch@12MP, 32-
ch@8MP, 48-ch@5MP, 80-ch@3MP, 128-ch@1080p simultaneous decoding, and outputting
decoded video via BNC, VGA, or HDMI interfaces, and it also supports multiple video stream
formats like H.265, H.264+, Hik264, H.264 and MPEG4. The decoded video can be displayed on
video wall or large screen.
Features
Powerful Decoding Capability
DS-6901UDI provides HDMI, VGA, and BNC output interfaces.
Up to 8-ch decoding at 24 MP resolution (DS-6916UDI).
DS-6904UDI, DS-6908UDI, DS-6910UDI, DS-6912UDI, DS-6916UDI provide HDMI (adaptable to
DVI-D) and BNC output interfaces.
Up to 4K (3840 × 2160@30 Hz) via HDMI interface (only for even interface), and up to
1080p@60Hz via VGA interface.
H.265+/H.265, H.264+/Hik264/H.264, MPEG4 and MJPEG video stream formats.
PS, RTP, TS, ES, HIK encapsulation formats.
Supports window opening and window roaming.
Supports two-window division mode.
You can double click the roaming window to zoom in or out for one roaming window or divided
roaming sub-window.
Three encoding levels: baseline, main, and high-profile.
G.722, G711A, G726, G711U, MPEG2-L2, and AAC audio stream formats.
Accessible by panoVu network camera.
Accessible by 2.4 MP DeepinView camera.
Accessible by thermal network camera and you can view the temperature measurement,
dynamic fire source detection, ship detection and VCA information in live view and playback.
You can enable or disable the smart information for the thermal network camera.
Multiple Decoding Control Modes
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
2
Two decoding modes: active decoding and passive decoding.
Decoding output of remote video files.
Decoding on video wall by directly linking cameras or by stream media forwarding.
Gets stream and decodes via URL.
Remotely controls PTZ of DVR or DVS via transparent channel.
Two-way audio via client software.
Supports multi-screen control with PC installed with RSC server.
Configurable LED width and height parameters when the LED is connected.
Regular and irregular virtual screen configurable to display multiple signal sources and get rid of
the restriction of physical screen.
LCD output type configurable for the BNC and VGA outputs; LCD and LED output types
configurable for HDMI outputs.
You can configure what the video wall show when decoding ends and streaming fails via the
Web browser and client software.
Auto-switch of sub-stream configurable via the Web browser and client software.
Integrated Capability
Decoding video/audio stream accessed by ONIVF, RTP/RTSP protocols.
Provides complete software development kit (SDK) for third-party developers.
Port link aggregation technology (Ethernet Channel).
Maintenance Management
Remotely get, configure, export and import parameters.
Remotely reboot, restore default settings and upgrading via web browser or client software.
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
3
Panels and Connections
Front Panel
Front panel of DS-6901UDI
Front Panel of DS-6901UDI
Description of DS-6901UDI Front Panel
Front Panel of DS-6904/6908UDI
Front Panel of DS-6904/6908UDI
1 2 3 4 5 6 7
No.
LED Indicator & Interface
1
POWER
2
LINK
3
Tx/Rx
4
HDMI video output
5
VGA video output
6
Audio output
7
Video output
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
4
Description of DS-6904/6908UDI Front Panel
LED Indicator & Interface
1
Power
2
HDD1
3
HDD2
4
USB
5
GE2
6
G2
7
RS-232 serial interface
8
GE1
9
G1
10
LAN
DS-6904UDI provides 4-ch HDMI output interfaces and other interfaces are the same with DS-
6908UDI.
Front Panel of DS-6910/6912/6916UDI
1
3
2
8
9
10
7
6
15
4
Front Panel of DS-6916UDI
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
5
Description of DS-6916UDI Front Panel
LED Indicator & Interface
1
HDD1
2
HDD2
3
POWER
4
LAN
5
G1
6
GE1
7
RS-232 serial interface
8
USB
9
GE2
10
G2
Rear Panel
Rear Panel of DS-6901UDI
Rear Panel of DS-6901UDI
Description of DS-6901UDI Rear Panel
Interface
Connections
1
LINE IN/OUT
Two-way audio input/output, 3.5 mm connector
2
RS-232 serial interface
Connect to RS-232 devices, e.g., PC.
3
LAN
10/100/1000 Mbps Ethernet interface
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
6
Rear Panel of DS-6908UDI
Rear Panel of DS-6908UDI
Description of DS-6908UDI
Rear Panel of DS-6916UDI
4
RS-485 serial interface
Connect to RS-485 devices, e.g., keyboard.
5
Alarm in
8 alarm inputs
Alarm out
8 alarm outputs
6
Power supply
12 VDC power input
7
GND
Interface
Connections
1
Wi-Fi
For Wi-Fi connection
2
Audio output
BNC connector
3
Video output
BNC connector
4
HDMI video output
HDMI output of decoded video
5
DVI video input
DVI input of decoded video
6
VGA video input
VGA input of decoded video
7
LINE IN/OUT
Two-way audio input/output, 3.5mm connector
8
RS-485 serial interface
Connect to RS-485 devices, e.g., keyboard.
9
Alarm in
8 alarm inputs
Alarm out
8 alarm outputs
10
Power
Power indicator
11
GND
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
7
Rear Panel of DS-6916UDI
Description of DS-6916UDI Rear Panel
DS-6910UDI provides 10 HDMI output interfaces, DS-6912UDI provides 12 HDMI output
interfaces and other interfaces are the same with DS-6916UDI.
Interface
Connections
1
Wi-Fi
For Wi-Fi connection
2
Audio output
BNC connector
3
Video output
BNC connector
4
HDMI video output
HDMI output of decoded video
5
DVI video input
DVI input of decoded video
6
VGA video input
VGA input of decoded video
7
LINE IN/OUT
Two-way audio input/output, 3.5mm connector
8
RS-485 serial interface
Connect to RS-485 devices, e.g., keyboard, etc.
9
Alarm in
8 alarm inputs
Alarm out
8 alarm outputs
10
Power
Power indicator
11
GND
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
8
Device Activation
Purpose
You are required to activate the decoder first by setting a strong password for it before you can use
the device. And you can configure the basic network parameters.
Activation via Web Browser and Client Software are all supported.
For the first-time user, the default user name of DS-6900UDI is admin, and the default IP
address is 192.0.0.64.
Activating via SADP Software
SADP software is used for detecting the online device, activating the camera, and resetting the
password.
Get the SADP software from the supplied disk or the official website, and install the SADP
according to the prompts. Follow the steps to activate the camera.
Run the SADP software to search the online devices.
Check the device status from the device list, and select the inactive device.
SADP Interface
Create a password and input it in the password field, and confirm the password.
Click Activate to activate the device.
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
9
STRONG PASSWORD RECOMMENDED–We highly recommend you create a strong password of
your own choosing (Using a minimum of 8 characters, including at least three of the following
categories: upper case letters, lower case letters, numbers, and special characters.) in order to
increase the security of your product. And we recommend you reset your password regularly,
especially in the high security system, resetting the password monthly or weekly can better protect
your product.
Change the device IP address to the same subnet with your computer by either modifying
the IP address manually or checking the checkbox of Enable DHCP.
Modify the IP Address
Input the password and click the Modify button to activate your IP address modification.
Activating via Web Browser
Power on the decoder, and connect the decoder to the network.
Input the IP address into the address bar of the web browser, and click Enter to enter the
activation interface.
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
10
Activation Interface
Create a password and input the password into the password field.
STRONG PASSWORD RECOMMENDED–We highly recommend you create a strong password of
your own choosing (Using a minimum of 8 characters, including at least three of the following
categories: upper case letters, lower case letters, numbers, and special characters.) in order to
increase the security of your product. And we recommend you reset your password regularly,
especially in the high security system, resetting the password monthly or weekly can better protect
your product.
Confirm the password.
Click OK to save the password and enter the live view interface.
Activating via Client Software
The client software is versatile video management software for multiple kinds of devices.
Get the client software from the supplied disk or the official website, and install the software
according to the prompts. Follow the steps to activate the camera.
Run the client software.
Click the Device Management icon to enter the Device Management interface, as shown in
the figure below.
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
11
Device Management
Check the device status from the device list, and select an inactive device.
Click the Activate button to pop up the Activation interface.
Create a password and input the password in the password field, and confirm the password.
STRONG PASSWORD RECOMMENDEDWe highly recommend you create a strong password of
your own choosing (Using a minimum of 8 characters, including at least three of the following
categories: upper case letters, lower case letters, numbers, and special characters.) in order to
increase the security of your product. And we recommend you reset your password regularly,
especially in the high security system, resetting the password monthly or weekly can better protect
your product.
Activation Interface (Client Software)
Click OK button to start activation.
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
12
Click the Modify Netinfo button to pop up the Network Parameter Modification interface, as
shown in the figure below.
Modify the Network Parameters
Change the device IP address to the same subnet with your computer by either modifying
the IP address manually or checking the DHCP checkbox.
Input the password to activate your IP address modification.
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
13
Network Configuration
You shall acknowledge that the use of the product with the Internet access might be under
network security risks. For avoidance of any network attacks and information leakage, please
strengthen your own protection. If the product does not work properly, contact with your
dealer or the nearest service center.
Purpose
You shall configure the basic network, and DDNS settings before other operations. In this chapter,
the network configuration of the decoder by the Web browser is provided.
The tested Web browsers include: IE 8.0+, Chrome 18.0+, Firefox 5.0+, and Safari 5.02+.
Open the Web browser and input the IP address of Decoder (e.g., http://192.168.0.0).
Log in to the device.
Login Interface
If the device has not been activated, you need to active the device first before login.
Activation Interface
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
14
STRONG PASSWORD RECOMMENDEDWe highly recommend you create a strong password of
your own choosing (Using a minimum of 8 characters, including at least three of the following
categories: upper case letters, lower case letters, numbers, and special characters.) in order to
increase the security of your product. And we recommend you reset your password regularly,
especially in the high security system, resetting the password monthly or weekly can better protect
your product.
If the device is already activated, input the user name and password in the login interface,
and click the Login button.
The following interface is shown after successful login.
Enter Web Page
Configuring Basic Network Settings
Purpose
You can set the network parameters for the decoder in the parameter configuration interface.
Click Configuration > Network > TCP/IP to enter the general network settings interface.
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
15
Configure Basic Network Settings
Set the network parameters, including the NIC, IP Address, Subnet Mask, Gateway, and DNS
Server.
The DS-6904/6908/6910/6912/6916UDI provides multiple NICs for selection.
Click Save to save the settings.
Configuring DDNS Settings
Purpose
If your device is set to use PPPoE as its default network connection, you may set Dynamic DNS
(DDNS) to be used for network access.
Prior registration with your DDNS Provider is required before configuring the system to use DDNS.
Click Configuration > Network > DDNS to enter the DDNS Settings interface.
Check the Enable DDNS checkbox to enable this function.
Select DDNS Type. Four different DDNS types are selectable: IPServer, DynDNS, PeanutHull,
and NO-IP.
DynDNS
1. Enter Server Address for DynDNS (e.g., members.dyndns.org).
2. Enter the User Name and Password registered in the DynDNS website.
3. In the Domain text field, enter the domain obtained from the DynDNS website.
4. Click Save to save the settings.
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
16
DynDNS Settings
IPServer
1. Enter server address for IPServer.
2. Click Save to save the settings.
For the IP Server, you have to apply a static IP, subnet mask, gateway and primary DNS from
the ISP. The Server Address should be entered with the static IP address of the PC that runs IP
Server software.
IPServer Settings
PeanutHull
1. Enter User Name and Password obtained from the PeanutHull website.
2. Click Save to save the settings.
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
17
PeanutHull Settings
NO-IP
1. Enter Server Address for NO-IP.
2. In the Domain text field, enter the domain obtained from the NO-IP website (www.no-
ip.com).
3. Enter the User Name and Password registered in the NO-IP website.
4. Confirm the password.
5. Click Save to save the settings.
NO-IP Settings
Configuring Security Control
Purpose
You can disable SSH, SADP, or HTTPS to enhance the access security, e.g., when you are in the
untrusted network environment.
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
18
Go to Configuration > Security Control.
Security Service
Uncheck Enable SSH, Enable SADP, or Enable HTTPS to disable the services.
By default, SSH is disabled, and SADP and HTTPS are enabled.
The login user name for SSH is root, and the password is the same with that of the
admin.
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
19
Decoding Parameters Configuration
Configuring Stream Settings
Purpose
The stream configuration refers to the auto stream switch between main stream and sub-stream.
Click Configuration > Decoding Configuration > Stream Configuration to enter stream
configuration interface.
Stream Configuration Interface
Check the check box of Auto-Switch Stream Type to enable auto switch between main
stream and sub-stream.
Click Save button to save the settings.
When a screen is split into more than 16 windows, the main stream will automatically switch to
sub-stream to lower the bandwidth.
Configuring Transparent Channel
Purpose
The Transparent Channel refers to the transmission channel used for forwarding data between the
decoder and the encoder without operating on the data.
Click Configuration > Decoding Configuration > Transparent Channel to enter transparent
channel settings interface.
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
20
Transparent Channel Interface
Select a transparent channel from the list to configure.
Click Modify to modify the parameters of the selected transparent channel.
Modifying Interface
Select the Local Serial Port and the Remote Serial Port to RS-485 or RS-232.
Local Serial Port: The serial port used as the transparent channel by the decoder.
Remote Serial Port: The serial port used as the transparent channel by the encoding device.
You can click Delete to delete the selected channel.
Configuring Synchronous Output Settings
Purpose
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
21
All video outputs of the device can be configured to be synchronous.
Click Configuration > Decoding Configuration > Synchronous Output Settings to enter the
Synchronous Output Settings interface.
Synchronous Output Settings
Click the Enable Sync Out button to enable the synchronization of all outputs. The following
message box pops up.
Enable Synchronous Output
Click OK to confirm the settings.
Configuring Personalized Settings
Purpose
You can set the stopped decoding image and failed streaming image for the personalized
configuration.
Click Configuration > Decoding Configuration > Personalized Configuration to enter the
personalized configuration interface.
Personalized Configuration
Select Blank Screen or Last Frame when decoding ends. If you select Blank Screen, the
screen will change blank when the decoding ends. If you select Last Frame, the screen will
show the last frame when the decoding ends.
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
22
Select No Network Signal or Last Frame when streaming fails. If you select No Network
Signal, the screen will show the cause of the failure when streaming fails. If you select Last
Frame, the screen will show the last frame when streaming fails.
Click Save to save the settings.
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
23
Decoding Operation
Configuring Encoding Devices
Adding an Encoding Device
Purpose
You can add an encoding device via IP address or URL.
Adding an Encoding Device via IP Address
Click IP to add encoding devices.
Encoding Device List
Input Device Name, Type, Port, User Name, Password and Channel Number and select the
Transmission Protocol, Area Name, and Device Manufacturer. Decide whether to enable
Stream Encryption and input the encryption password. Check the checkbox of Get Stream
by Stream Media to lower the network load of the device.
You can add device by IP or DDNS. If you select DDNS, you need to enter the domain
name and ensure that you have configured the DNS server. For details, see section 4.1
Configuring Basic Network Settings.
If Stream Encryption is enabled, you need to input the encryption password so you can
remotely watch live videos of encrypted camera streams.
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
24
Add Device via IP Address
(Optional) You can also click to add a new area and click to save the area.
Click Next to select the channel. The channel(s) displayed here depend(s) on the Channel
Number you input on the previous page.
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
25
Select the Channel
Click OK to save the settings and add the device.
Adding an Encoding Device via URL
Click URL to add encoding devices.
Encoding Device List
Input the Device Name and URL. Select the Area Name from the dropdown list or click to
add a new area. Decide whether to enable Stream Encryption and input the encryption
password.
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
26
An example of the URL format is as follows:
rtsp://10.9.1.233:554/h264/ch1/main/av_stream/?username=admin?password=hik12345?li
nkmode=tcp
In the above URL, 10.9.1.233 indicates the device IP, admin indicates the user name,
hik12345 indicates the password, and tcp indicates the stream transport protocol. The
transport protocol can be set as tcp, udp, and mcast.
If Stream Encryption is enabled, you need to input the encryption password so you can
remotely watch live videos of encrypted camera streams.
Add Device via URL
Click OK to save the settings.
Modifying an Encoding Device
Select one area or one encoding device, and click Modify to modify corresponding
parameters.
Modify Area
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
27
Modify Encoding Device
Click OK to save the new settings.
Deleting an Encoding Device
Select one area or one encoding device and click Delete to pop up the note interface below.
Deleting Note
Click OK to delete it.
Configuring Video Wall
Purpose
To realize the display of the decoded video on the video wall, you must set the video wall
configuration first so as to link the video output with video wall.
Click Video Wall Configuration to enter the corresponding interface.
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
28
Video Wall Configuration
You can use the default video wall layout or click to add a new layout. Input the number
of screens in row and column and up to 16 × 20 split screens are available.
Screen Layout Configuration
Click OK to finish the adding of the video wall information.
Drag the output channels from the left-side list to the display screen.
Move the cursor to the window, and the icon automatically appears in the upper-right
comer of the window. Click to close the window.
Close the Window
Configuring Decoding Output
Purpose
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
29
In the output list, there are two kinds of video output signals, respectively BNC and HDMI. You can
configure the resolution and output mode.
Configuring BNC Output
Click Video Wall Configuration to enter the corresponding interface. Right click one of the
BNC signal sources.
BNC Decoding Output
Right click one of BNC signal sources and select Resolution Configuration to pop up the
interface as below.
Resolution Configuration
Select the resolution from the LCD Resolution drop-down list. PAL and NTSC are selectable.
Check the checkbox of Batch Configuration to set the same configuration for other outputs
with same signal source.
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
30
Batch Configuration
Click OK to save the settings.
Configuring HDMI Output
Right click one of the HDMI signal sources.
HDMI Decoding Output
Click Resolution Configuration to enter the interface below.
Resolution Configuration
Select the Output Mode and set the corresponding parameters. You can select LCD and LED.
LCD
1. Select the Output Mode to LCD.
1. Select the resolution from the LCD Resolution drop-down list.
Set LCD Resolution
LED
1. Select the Output Mode to LED.
1. Input the LED Width and LED Height in the corresponding text fields.
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
31
Set LED Resolution
The value of LED width and height cannot exceed the output resolution you select.
The supported min. value of LED width × height of HDMI output is 288 × 288 and the max.
value is 1920 × 1080.
Check the checkbox of Batch Configuration to set the same configuration for other outputs
with same signal source.
Batch Configuration
Click OK to save the settings.
Right click one of the HDMI signal sources and click Output Mode Configuration to pop up
the interface below.
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
32
Output Mode Configuration
Select the output mode to HDMI or DVI.
Check the checkbox of Batch Configuration to set the same configuration for other HDMI
outputs.
Click OK to save the settings.
Decoding Video on Video Wall
Purpose
You can decode the video of the encoding devices on the video wall by dragging the channel
directly or opening window via coordinate.
Interface Description
Click Video Wall to enter the video wall interface.
Video Wall Interface
Refer to the following figure for the video wall description.
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
33
Description of Video Wall
No.
Description
1
Encoding Device List: The encoding devices added in the Web
2
Scene: The Web supports up to 8 scenes by default, capable of
independent scene configuration and fast switching.
3
Video Wall: Video wall operation interface
4
Shortcut Toolbar:
Select decoding screen layout.
Save the scene
Delete all windows
Refresh all windows
If two decoding windows overlap with each other, click the
icon to switch the upper window to the bottom.
Dragging Channels to the Video Wall
Drag the channel from the left side list to realize the decoding in the selected window.
You can also drag an area file to the video wall to decode the added encoding devices in the
area file on the video wall.
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
34
You cannot drag an area file to the video wall across the LCD and LED outputs.
If there are more than 3 encoding devices in an area, when you drag the area file to the
video wall, the note pops up to remind you that no more window can be opened or the
total area of layers in single-screen has reached the limit. Only the first 3 encoding
devices in the area file can be decoded on the video wall.
Decode the Video on the Wall
Select one decoding window and click to set the decoding screen layout.
1/2/4/6/8/9/12/16/25/36 window division modes are available.
Window Division
Openning Window via Coordinate
Select one encoding device and right-click it to pop up the interface below.
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
35
Right-Click Menu
Click Open Window via Coordinate.
Select the Window Opening Mode. LCD and LED are selectable.
Opening Window via Coordinate for LCD Output
1) Select the Window Opening Mode as LCD.
2) Enter the Left Margin, Right Margin, Width and Height in the corresponding text
fields.
3) Click OK to save the settings.
Open Window via Coordinate for LCD Output
4) The window will be opened in the LCD area.
Window Opened in LCD Area
Opening Window via Coordinate for LED Output
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
36
1) Select the Window Opening Mode as LED.
2) Select the LED area.
The area number depends on the HDMI decoding output configuration. For the
adjacent HDMI outputs, if the resolution is configured to be LED, and the LED width
or height is same, they can be seen as one area. You can refer to Chapter 6.3.2
Configuring HDMI Output.
3) Enter the Left Margin, Right Margin, Width and Height in the corresponding text
fields.
4) Click OK to save the settings.
Open Window via Coordinate for LED Output
5) The window will be opened in the LED area.
Window Opened in LED Area
Managing Decoding
Right-click the selected window and the Decoding Management interface pops up.
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
37
Decoding Management
Stop Decoding
Click the button to stop decoding.
Decoding Status
1. Click the button to enter the decoding status interface.
2. View the decoding status.
Decoding Status
3. Click More to check the decoding information of each channel.
Check More Decoding Status Information
Turn on Audio
1. Click the button to enter the interface below.
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
38
Turn on Audio
2. Select from the dropdown list to enable the audio in the corresponding window.
3. Click OK to save the settings.
Decoding Delay
1. Click the button to enter the decoding delay interface.
2. Select the type of decoding delay. The default mode is the same with medium real time
and fluency.
Decoding Delay
3. Click OK to save the settings.
Enable Smart Information
1. Click the button to enable smart information.
2. (Optional) Click Disable Smart Information to disable the function.
For the normal IP camera, the smart information refers to the VCA information. For the thermal
network camera, the smart information refers to the VCA and the temperature, dynamic fire
source detection and ship detection information.
Stream Information
Click the button to view stream information such as host name and transport protocol.
Switching Encoding Channel
Purpose
You can switch the encoding channel to display on the selected decoding window.
Select a decoding window and select an encoding channel from the left side list.
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
39
Click Switch Channel from the right-click menu to switch the selected channel to the
decoding window.
Right-Click Menu
Configuring Auto-Switch of Cameras
Purpose
You can enable auto-switch of the added cameras in one area.
Select a camera area and click Start Auto-Switch from the right-click menu.
Right-Click Menu
On the Start Auto-Switch interface, input the Interval for auto-switch.
Start Auto-Switch
Click OK to save the settings.
Roaming Window
Drag one camera from the left side list to the video wall layout to enable decoding in the
corresponding window automatically.
Drag the decoding window randomly to realize the window roaming on the video wall.
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
40
Window Roaming
Select one of the roaming windows, and click to realize window division in the selected
roaming window with 1/2/4/6/8/9/12/16/25/36 available.
(Optional) Generally the selected window is at top by default. Click to place the
selected window at bottom.
Roaming and fluent video cannot be realized in the window with the signal output via
BNC interfaces.
The roaming window cannot cross the output window of different resolution. For
example, you cannot move the roaming window across the LCD and LED window.
Zooming in/out Roaming Windows
Purpose
You can double click the roaming window to zoom in or out.
For one roaming window:
Double click the roaming window to zoom in. Then the window will occupy the area with the
same output.
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
41
Zoom in
Double click the window again to zoom out. Then the window will restore to the original size.
Zoom out
For divided roaming sub-window:
Double click the divided roaming sub-window to zoom in. Then the sub-window will occupy
the whole window before being divided.
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
42
Zoom in
Double click the divided roaming sub-window again to zoom out. Then the sub-window will
restore to the original size.
Zoom out
Configuring Scene
Purpose
Different video wall layouts can be saved as different scenes and up to 8 scenes can be added. You
can easily view the required live videos on the video wall by calling the scene.
In the Video Wall interface drag the channel from the left side list to realize the decoding in
the selected window.
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
43
Save the Scene
Click Save to save the scene directly or click Save as to pop up the following dialog box.
Save as Interface
Input the Name and click OK to save the scene.
Scene List
Select one of the scenes you have configured. Click to call the scene.
(Optional) You can also click to rename the scene, or click to delete the scene.
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
44
User Management
Purpose
You can add, modify, delete, and set the permissions of the user accounts on the User
Management interface.
Click Configuration > System > User Management to enter the user management interface.
Configure User Account
You can add, modify or delete the user account, as well as configure operating permissions
for each user account.
Add User Account and Set Permissions
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
45
Up to 32 user accounts can be added including the admin.
For the admin user, only the password can be modified.
You must input the admin password if you want to modify the user account except the
admin.
STRONG PASSWORD RECOMMENDEDWe highly recommend you create a strong password of
your own choosing (Using a minimum of 8 characters, including at least three of the following
categories: upper case letters, lower case letters, numbers, and special characters.) in order to
increase the security of your product. And we recommend you reset your password regularly,
especially in the high security system, resetting the password monthly or weekly can better protect
your product.
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
46
System Configuration
Checking Device Information
Purpose
You can check the information of the device in the device information interface, such as the
Physical Address, Device Type, Device Serial No., Firmware Version, Decoding Version, Web
Version, Plugin Version, etc., and modify the Device Name.
Click Configuration > System > System Settings > Basic Information.
(Optional) Modify Device Name.
The default device name is Embedded multiDecoder. If you want to modify the device name
to the model of the device, enter Embedded multiDecoder + # + device model in the text field.
View other device information.
The description about the decoder configuration and operation by web browser below is
based on the firmware, decoding, web and plugin version shown in the following figure.
Check Device Information
Configuring Time Settings
Purpose
You can set the time for the decoder in the Time Settings interface.
Click Configuration > System Settings > Time Settings to enter the following interface:
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
47
Configure Time Settings
Configure the time synchronization by NTP server or manually.
Configuring Time Synchronization by NTP Server
A Network Time Protocol (NTP) Server can be configured on your device to ensure the
accuracy of system date/time.
If the device is connected to a Dynamic Host Configuration Protocol (DHCP) network that
has time server properties configured, the camera will synchronize automatically with the
time server.
Enable the NTP function by selecting the radio button, and configure the following
settings:
NTP Server: IP address of NTP server.
NTP Port: Port of NTP server.
Configure Time by NTP
If the device is connected to a public network, you should use a NTP server that has a time
synchronization function, such as the server at the National Time Center (IP Address:
210.72.145.44). If the device is set up in a more customized network, NTP software can be
used to establish a NTP server used for time synchronization.
Configuring Time Synchronization Manually
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
48
Enable the Manual Time Sync. function by selecting the radio button and then click icon
to set the system time from the pop-up calendar.
Configure Time Manually
Select the time zone that is closest to the device’s location from the drop-down list.
Click Save to save the settings.
Configuring RS-232 Serial Port
Click Configuration > System Settings > RS-232 to enter the following interface:
Configure RS-232 Settings
Configure the RS-232 parameters, including the baud rate, data bit, stop bit and parity type.
Select the Operating Mode of RS-232 as Console or Transparent Channel.
Console: Use the RS-232 serial port for debugging the decoder.
Transparent Channel: Use the RS-232 serial port as the transparent channel.
Click Save to save the settings.
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
49
Configure RS-485 Serial Port
Click Configuration > System Settings > RS-485 to enter the following interface.
Configure RS-485 Settings
Configure the RS-485 parameters, including the baud rate, data bit, stop bit and parity type.
Click Save to save the settings.
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
50
System Maintenance
Purpose
You can click Configuration > System > Maintenance to perform configuration files import/export,
reboot, upgrade, and default operations.
Importing Configuration Files
Purpose
The configuration files of the device can be imported from the local device, which maintains
convenient parameters configuration.
Enter the parameters import interface.
Import Configuration File
Click Browse to select the file from the local directory and then click the Import button to
import a configuration file. Click Device Parameters to export parameters.
Exporting Configuration Files
Purpose
The configuration files of the device can be exported to the local device, which maintains
convenient parameters configuration.
Enter the parameters export interface.
Export Configuration File
Click Device Parameters to export parameters.
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
51
Upgrading the Device
Enter the Upgrade interface.
Click Browse to search the upgrading files.
Click Upgrade to upgrade it.
Upgrade the Device
When logging in to the device for the first time, install the plug-in according to the
prompt on the screen.
The device will restart after completing the upgrade.
Restoring the Default Settings
Enter the Default Settings interface.
Click Default to restore the completed factory settings of the decoder.
Or click Restore to restore a part of the factory settings of the decoder.
Restore Default Settings
Rebooting the Device
Enter the Reboot Device interface.
Click Reboot to reboot the device.
Reboot the Device
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
52
Decoder Configuration and
Operation by Client Software
Run the disk of iVMS-4200 Video Wall Client Software, and double click the icon to install it in your
PC. In this chapter, the basic procedure of operating the decoder by the software is described.
Interface Description
The following figure shows the main interface after accessing to the software.
Main Interface
Refer to the following table for the description of the decoding toolbar on the bottom of the main
interface.
Decoding Toolbar
Icon
Name
Description
/
Start/Stop Live View
Start/Stop live view of all the windows.
/
Start/Stop All Decoding
Start/Stop decoding all signal sources and
cameras.
Close All Windows
Close all the windows displayed on the
video wall.
Start All VCA Decoding
Start VCA decoding for all live view
signals. Once started, the VCA
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
53
information can be viewed in live view.
Stop All VCA Decoding
Stop VCA decoding for all live view
signals.
Open Window
Draw a window according to your need.
The size and position of the window are
adjustable.
Open Window via
Coordinate
Open a window by inputting X-
coordinate, Y-coordinate, width and
height.
Show Window ID
Click it to show the window ID.
Refresh
Refresh the video wall status.
The software is capable of many functions for controlling and managing many devices. In this
manual, only the operation related to the decoder is introduced.
Adding an Encoding/Decoding Device
Click Device Management tab to enter the Device Management interface.
Device Management Interface
Click Add Device and you can add device manually by means of IP address/domain, IP
segment, and URL.
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
54
An example of the URL format is as follows:
rtsp://10.9.1.233:554/h264/ch1/main/av_stream/?username=admin?password=hik12345?li
nkmode=tcp
In the above URL, 10.9.1.233 indicates the device IP, admin indicates the user name,
hik12345 indicates the password, and tcp indicates the stream transport protocol.
Add Device by IP/Domain
You can add device by detecting the online devices. The active online decoding devices in
the same local subnet with the software are displayed on the list. Select the decoder and
click Add to Client to add the decoder.
Add Device by Detecting the Online Device
The successfully added encoding/decoding device can be viewed in the list.
List of Added Devices
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
55
Configuring Video Wall
Adding a Video Wall
Click Video Wall tab to enter the Video Wall interface.
You can use the default video wall layout or click and select Add Video Wall to enter the
Add Video Wall interface.
You can modify the default video wall, but not allowed to delete it.
Add Video Wall
Input the Video Wall Name, and the number of windows in row and column text fields.
Click Add to add the video wall.
Up to 5 video walls can be added to the client software.
The range of the row number is between 1 and 16, and column number between 1 and
20.
Drag the output channels from the left side list to link the decoding output to the video wall.
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
56
Link Decoding Output to Video Wall
(Optional) You can select a linked display window and click Cancel to cancel the linkage, or
click Cancel All to cancel all the linked windows.
Modifying a Video Wall
Click Modify Video Wall to enter the Modify Video Wall interface.
Edit the layout, name and decoding outputs of the current video wall.
Modify Video Wall
Deleting a Video Wall
Select Delete Video Wall and the information dialog box pops up.
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
57
Delete Video Wall
Click OK to delete the selected video wall.
Configuring Virtual Screen
Purpose:
Video wall layout is restricted by the physical screen and in practice, one physical screen usually
displays more than one signal source. Virtual screen layout allows one physical screen to display
multiple signal sources and get rid of the restriction of physical screen.
On the Video Wall interface, click and select Modify Video Wall to enter the Modify
Video Wall interface.
Modify Video Wall
Select the output area for adding virtual screen.
Click Virtual Screen Config to expand the Virtual Screen Configuration menu.
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
58
Configure Virtual Screen
Select the window(s) you want to add virtual screen.
You cannot add virtual screen across the LCD and LED areas.
Click Add Virtual Screen to enter Configure Virtual Screen interface.
1. Select a virtual screen mode from and input the row and
column number.
For the mode, the row number ranges from 1 to 16 and column number ranges from 1 to 20.
For modes such as , the row number ranges from 2 to 16 and the column number
ranges from 2 to 20. For modes such as , the row number ranges from 2 to 16 and the
column number ranges from 3 to 20.
Configure Virtual Screen
2. Input the Left Crop Pixel, Top Crop Pixel, Right Crop Pixel and Bottom Crop Pixel in the
corresponding text fields.
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
59
3. Click OK to save the settings and the dotted line in grey constitutes the virtual screen
division.
Added Virtual Screen
(Optional) Select the configured virtual screen area and click Delete Virtual Screen to delete
it.
On the Video Wall interface, drag a signal source to the window, and you can view the live
view in the virtual video wall layout.
Live View in Virtual Screen
Configuring Decoding Parameters
Purpose
You can configure what the screen show when decoding ends and streaming fails, enable auto-
switch of sub-stream, and set sub-window size on the Add/Modify Video Wall interface.
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
60
On the Add/Modify Video Wall interface, select the added decoder and click to enter the
General Parameters Configuration of Video Wall interface.
General Parameters Configuration of Video Wall
Select Blank Screen or Display the last frame image for Window Static Mode. If you select
Blank Screen, the screen will change blank when the decoding ends. If you select Display the
last frame image, the screen will show the last frame when the decoding ends.
Select No Network Video Signal or Last Frame for Failed Streaming Display Mode. If you
select No Network Video Signal, the screen will show no signal when streaming fails. If you
select Last Frame, the screen will show the last frame when streaming fails.
(Optional) Check Enable of Sub-Stream Auto Switch to enable the function.
Enter Sub-Window Width and Sub-Window Height. The width and height range from 1 to
640.
Click OK to save the settings.
Configuring Decoding Output
Purpose
You can set the output type and resolution of BNC and HDMI decoding outputs on the Add/Modify
Video Wall interface.
Configuring BNC Output
On the Add/Modify Video Wall interface, select a BNC decoding output and click to enter
the Modify Output interface.
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
61
Modify BNC Output
Select the Output Type and set the corresponding parameters. Only LCD output type can be
configured.
Select the Video Standard. PAL and NTSC are selectable.
Set Background Color for the output. Eight colors are available and you can set a custom
color.
If you set a background color for an output, the other two linked outputs are set as the same
background color. BNC1, HDMI1, and HDMI2 are linked, BNC2, HDMI3, and HDMI4 are linked
etc.
Check Batch Configuration to set the same configuration for other outputs with same signal
source.
Batch Configuration
Click OK to save the settings.
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
62
Configuring HDMI Output
On the Add/Modify Video Wall interface, select a HDMI decoding output and click to
enter the Modify Output interface.
Modify HDMI Output
Select the Output Type and set the corresponding parameters. You can select LCD and LED.
LCD
1. Select the Output Type to LCD.
2. Select the Resolution from the drop-down list.
3. Set Background Color for the output. Eight colors are available and you can set a custom
color.
LED
1. Select the Output Type to LED.
2. Input the Width × Height in the corresponding text fields.
3. Set Background Color for the output. Eight colors are available and you can set a custom
color.
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
63
Set LED Resolution
The value of LED width and height cannot exceed the output resolution.
The supported min. value of LED width × height of HDMI output is 288 × 288 and the max.
value is 1920 × 1080.
If you set a background color for an output, the other two linked outputs are set as the
same background color. BNC1, HDMI1, and HDMI2 are linked, BNC2, HDMI3, and HDMI4
are linked etc.
Check the checkbox of Batch Configuration to set the same configuration for other outputs
with same signal source.
Click OK to save the settings.
Operating Decoding
Purpose
After the settings of the encoding device, decoding device and video wall, the video stream from
the encoding devices can be decoded and displayed on the video wall.
After enabling decoding and displaying, the video from the encoding devices can be displayed
on the video wall. And the real-time live view is shown on the physical video wall.
Dragging Channels to the Video Wall
Enter the Video Wall interface.
Video Wall Interface
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
64
Drag the camera from the left side camera list to the display window of video wall. The video
stream from the camera will be decoded and displayed on the video wall.
You can also select a decoding window and then double click a camera to decode and display
the video. You can also hold the Ctrl or Shift key to select multiple cameras and then drag
them to the video wall.
You can click on the lower part of the interface to stop decoding of all the windows.
Opening Window for Non-LED Screen
Purpose
On the non-LED screen, you are allowed to open the window via coordinate.
Enter the Video Wall interface, select the non-LED screen and click the button to open
the window via coordinate.
Open Window via Coordinate (1)
Select the Device Name from the drop down list, and input the X-Coordinate, Y-Coordinate,
Width and Height.
Click OK to save the settings and the opened window will be displayed on the video wall.
You cannot open the window via coordinate across both the non-LED and LED screens.
The X- coordinate and Y-coordinate are relative output channel coordinates.
Opening Window for LED Screen
Purpose
On the LED screen you are allowed to open the window via coordinate.
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
65
Enter the Video Wall interface, select the LED screen and click the button to open the
window via coordinate.
Open the Window via Coordinate (2)
Select the Device Name from the drop down list, and input the X-Coordinate, Y-Coordinate,
Width and Height.
Click OK to save the settings and the opened window will be displayed on the video wall.
You cannot open the window via coordinate across both the non-LED and LED screens.
You cannot edit the X-Coordinate of LED Area and Y-Coordinate of LED Area.
The X-coordinate and Y-coordinate are relative output channel coordinates.
Managing Decoding
Right-click on a playing window to activate the decoding management menu as shown below.
The menu differs depending on the devices.
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
66
Right-click Menu
Configure the following parameters.
Start/Stop Decoding: Start/stop the decoding.
Start/Stop Live View: Start/stop the live view of the decoded video. The smart information
can be displayed in live view.
Start/Pause Auto-Switch Decoding: Start/pause auto-switch decoding. This function is only
supported by decoder.
Start/Stop VCA Decoding: Start/stop VCA decoding.
Enable Audio: Turn on/off the audio of the decoding video.
Decoding Status: View the status of the decoding channel, like decoding status and stream
type.
Close Other Windows: Click it to close other decoding windows.
Stick at Bottom: Generally the selected window is at top by default. Click Stick at Bottom to
place the selected window at bottom.
Full Screen: Click it to set the decoding window in full screen.
Lock/Unlock: Click Lock to lock the window. The locked decoding window is unable to do any
operation.
Batch Export Stream: Record and export a segment of stream of one or multiple cameras to
your local PC. A maximum of 16 cameras are supported at a time.
Set as Alarm Window: Display the video triggered by event or alarm input on video wall.
Screen Control: Enter screen control when the RSC server is added. Please refer to Chapter
10.8 for details.
Configuring Auto-Switch Decoding
Purpose
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
67
Auto-switch decoding refers to you can configure multiple video streams in a video output and the
dwell time in switching video streams.
Drag a camera group to the display window of the video wall.
Click to set the dwell time for the auto-switch decoding and click to start auto-switch
decoding. You can view the auto-switch decoding on the physical video wall. You can click
to stop auto-switch decoding.
Auto-Switch Decoding
PTZ Control
This section is only applicable to the decoded cameras supporting PTZ control.
Click PTZ Control to expand the PTZ control panel.
PTZ Control Panel
Click the directional and functional buttons to set the preset.
Playback
Purpose
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
68
The video file is supported to be played back on the video wall.
Playback function is only supported by decoder.
Drag the camera on the left-side list to the display window of video wall, or you can open a
window if supported.
Video Wall
Click Window at the bottom to unfold more configuration and operation toolbar.
Click Start Playback to start searching the video files of the camera.
Playback Interface
If the record file is of current day, the video file can be played back automatically. If not, you
can click to show the date and click More Search Conditions to specify more conditions,
and click Search to find the video file.
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
69
Search Record File
The following icons are available for controlling the playback.
Playback Toolbar
Icon
Function
Pause/Start the playback
Delete View
Slow Forward
Fast Forward
Start/Stop Clipping
Capture
Configuring Scene
Click Scene to expand the scene interface.
You can click to add a new scene, click to edit the name for the scene, click to
delete the scene and click to save the scene.
Up to 8 scenes can be added.
Scene List
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
70
Configuring Window
Configuring Window Division Mode
Purpose
You can set the window division mode of the decoding window.
Drag a camera from the left-side list to the display window of the video wall, or you can
open a window.
Click to expand the menu.
Click to select the window division mode. 1/2/4/6/8/9/12/16/25/36 modes are
selectable.
Zooming in/out Roaming Windows
You can double click the roaming window to zoom in or out. Refer to Chapter 6.4.8 Zooming in/out
Roaming Windows for reference.
Configuring Window Parameters
Purpose
You can set the window as the alarm window to display the video triggered by event or alarm input
on the video wall. You can also set the decoding delay and image parameters.
Drag the camera from the left-side list to the display window of the video wall, or you can
open a window if supported.
Click Window Configuration to pop up the configuration dialog box.
Window Configuration
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
71
Configure the parameters as needed. The window status shows the current status of the
selected window.
Alarm Window: Display the video triggered by the event or alarm input on the selected
window of the video wall.
Decoding Delay: Set the delay status of the decoding according to the actual needs.
Functions like Fluent Video, 3D DNR, Defog, and Low Illumination are not supported by DS-
6900UDI.
Decoding Thermal Network Camera
Purpose
The thermal network camera can be connected to the decoder and you can realize live view and
playback, and decode the video including the temperature or fire point information on the video
wall.
Configuring the Thermal Network Camera Parameters
Purpose
You can configure the corresponding parameters of thermal network camera via the Web browser
first before decoding it on the video wall.
Configuring Temperature Measurement
Configure the VCA resource type.
1. Log in to the camera via the Web browser.
2. Click Configuration > Advanced Configuration > System > VCA Resource Type to enter
the VCA Resource Type configuration interface.
3. Select Temperature Measurement and Behavior Analysis as the VCA Resource Type.
4. Click Save to save the settings.
Configure temperature measurement.
1. Click Configuration > Advanced Configuration > Temperature Measurement >
Temperature Measurement Configuration to enter the Temperature Measurement
configuration interface.
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
72
Temperature Measurement Configuration
2. Check the checkboxes of the interface to set the temperature measurement
configurations.
Enable Temperature Measurement: Check the checkbox to enable temperature
measurement function.
Display Temperature Info. on Stream: Check the checkbox to display temperature
information in live view.
Add Original Data on Capture: Check the checkbox to add original data on capture.
Add Original Data on Stream: Check the checkbox to add original data on stream.
3. Select the Data Refresh Interval from 1s to 5s.
4. Select the Unit to display temperature with Degree Celsius C)/Degree Fahrenheit
F)/Degree Kelvin (K).
5. Configure the Temperature Range.
6. Click Save to save the settings.
Configure the temperature measurement and alarm.
1. Click Configuration > Advanced Configuration > Temperature Measurement >
Temperature Measurement and Alarm to enter the Temperature Measurement and
Alarm configuration interface.
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
73
Temperature Measurement and Alarm
2. Set the alarm rule: Select a temperature measurement rule from the rule list and
configure the parameters.
Name: You can customize the rule name.
Type: Select point, line, or frame as rule type.
Emissivity: Set the emissivity of your target. The emissivity of each object is different.
Distance (m): The straight-line distance between the target and the device.
Reflective Temperature: If there is any target with high emissivity in the scene, check
the checkbox and set the reflective temperature to correct the temperature. If no such
target exists, uncheck the checkbox.
3. Click in the list to show the alarm rule interface.
Alarm Rule: The alarm rule varies according to different types. The rule is to compare
the temperature information of two selected regions. For targets set by frame, the rules
include: Max. Temperature is Higher than, Max. Temperature is Lower than, Min.
Temperature is Higher than, Min. Temperature is Lower than, Average Temperature is
Higher than, Average Temperature is Lower than, Temperature Difference is Higher
than, and Temperature Difference is Lower than. For targets set by line, the rules
include Max. Temperature, Min. Temperature, and Average Temperature. For targets
set by point, the rules are distinguished by Average Temperature.
Pre-Alarm Temperature and Alarm Temperature: Set the pre-alarm temperature and
alarm temperature. The device sends pre-alarm when its rule temperature exceeds pre-
alarm temperature and sends alarm when its rule temperature exceeds alarm
temperature.
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
74
Tolerance Temperature: Set the tolerance temperature and the device judges whether
the triggered alarm stops until the device temperature/temperature difference is lower
than rule temperature by tolerance temperature. For example, set tolerance
temperature as C, set alarm temperature as 5C, and set pre-alarm temperature as
50°C. The device sends pre-alarm when its temperature reaches 5C and it alarms
when its temperature reaches 55°C and only when the device temperature is lower than
52°C will the alarm be cancelled.
4. Draw the Target Region. Select the rule and draw the corresponding frame/line/point.
Click to draw the point. Click to draw the line. Click to draw the frame.
Draw Point
Draw Line
Draw Frame
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
75
5. Set Temperature Difference Alarm. Click Temperature Difference Alarm to enter the
temperature difference alarm interface, up to four temperature difference alarms can be
set.
Temperature Difference Alarm is only applicable to the targets set by frame.
6. Set Alarm Linkage. Click Alarm Linkage to enter the alarm linkage interface and set the
linkage methods.
7. Click Save to save the settings.
Configure the local parameters to display the temperature information on the live view
interface.
1. Click Configuration > Local Configuration to enter the Local Configuration interface.
Local Configuration
2. In the Live View Parameters section, select the Enable radio button of Display
Temperature Info. on Stream to display the temperature information on the live view
interface.
3. Click Save to save the settings and then you can view the position of the configured point,
line and frame, the ID and temperature information on the live view interface.
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
76
Live View
Configuring Dynamic Fire Source Detection
Configure the VCA resource type.
1. Log in to the camera via the Web browser.
2. Click Configuration > Advanced Configuration > System > VCA Resource Type to enter
the VCA Resource Type configuration interface.
3. Select Dynamic Fire Source Detection as the VCA Resource Type.
4. Click Save to save the settings and the device will reboot to take the settings into effect.
For the VCA resource type, only one type can be configured. For example, if you select
Temperature Measurement and Behavior Analysis as the VCA resource type, you cannot set
Dynamic Fire Source Detection.
Configure dynamic fire source detection parameters.
1. Click Configuration > Advanced Configuration > Smart Event > Dynamic Fire Source
Detection to enter the Dynamic Fire Source Detection configuration interface.
Dynamic Fire Source Detection
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
77
2. Check the checkbox of Enable Dynamic Fire Source Detection to enable the function.
3. (Optional) Check the checkbox of Display Fire Source Frame on Stream to display a red
frame around the fire source on stream when fire occurs.
4. You can slide the cursor to adjust the Sensitivity degree of dynamic fire source detection
from 1 to 10. The bigger the number is, the more sensitive the detecting would be.
5. Check the checkbox to select the Linkage Method taken for the alarm input.
6. Click Save to save the settings.
Configure the local parameters to display fire point distance, display highest temperature,
locate highest temperature point or frame fire point on the live view interface.
1. Click Configuration > Local Configuration to enter the Local Configuration interface.
Local Configuration
2. In the Live View Parameters section, check the checkbox after Fire Point to enable the
functions required. Display Fire Point Distance, Display Highest Temperature, Locate
Highest Temperature Point and Frame Fire Point are selectable.
3. Click Save to save the settings and then you can view the fire point distance, highest
temperature, highest temperature point or fire point frame in the live view if fire point is
detected.
Configuring Ship Detection
Enter Configuration > Advanced Configuration > System > VCA Resource Type to select Ship
Detection as the VCA Resource Type.
Click Configuration > Advanced Configuration > Smart Event > Ship Detection to enter the
Ship Detection interface.
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
78
Check the checkbox of Enable Ship Detection to enable the function.
Check the checkbox of Display Detection Frame on Video to display the frame and alarm
line on stream.
Input the device height in the textbox as the height of device above the water level.
Draw the ship detection area and the alarm lines.
1. Click Draw Area button. Click the mouse on the live view image to draw a ship detection
area and right-click to finish drawing. The alarm will be uploaded when ship is detected in
this area.
2. Click Draw Alarm Line button. Click the mouse on the live view image to draw an alarm
line and right-click to finish drawing. The device alarms and counts the ship number when
ships are detected in the area and the ship information will be displayed on the right.
Make sure the alarm line is longer than the width of ship detection area.
3. Click Recount to start counting the ships detected in the area afterwards.
Check the checkbox to select the linkage method taken for the alarm input.
Click Save to save the settings.
Configuring VCA
Configure the live view parameters to enable rules.
1. Click Configuration > Local Configuration to enter the Local Configuration interface.
Local Configuration
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
79
2. On the Live View Parameters section, select the Enable radio button after Rules to display
the colored marks when the motion detection, face detection, or intrusion detection is
triggered. E.g., enabled as the rules are, and the face detection is enabled as well, when a
face is detected, it will be marked with a green rectangle on the live view.
Configure the VCA information.
1. Click Configuration > VCA Configuration > VCA Info. to enter the VCA Information
interface.
VCA Information
2. On the Display Information section, check the checkboxes to enable corresponding
displays.
Display Target info. on Alarm Picture: There will be a frame on the target on the
uploaded alarm picture if the checkbox is checked.
Display Rule info. on Alarm Picture: The captured target and the configured area will be
framed on the alarm picture.
Display VCA info. on Stream: The green frames will be displayed on the target if in a live
view or playback.
Configure the rules for VCA. Refer to the User Manual of Thermal Network Camera for the
specific operations.
Decoding Thermal Network Camera on the Video Wall
Add the thermal network camera to the video wall client software.
On the Video Wall interface, drag the added thermal network camera to the video wall.
Click to start live view and you can view the corresponding information on the live view
interface.
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
80
Decode Thermal Camera on the Video Wall
If VCA is enabled for the thermal network camera, the decoder can analyze the VCA
behavior, mark the moving target and track it. You can view the VCA information marked
in the green frames in the live view. If the rule configured for the thermal network camera
is broken, the alarm will be triggered.
If temperature measurement is enabled, you can view the position of the configured
point, line and frame, the ID, and temperature information in the live view.
If fire point detection is enabled and there is a fire point detected, you can view the
configured fire point distance, highest temperature, highest temperature point and fire
point frame in the live view.
If ship detection is enabled and there is a ship detected, you can view the configured
frames and alarm line in the live view.
(Optional) You can click Window tab on the bottom of the interface and click Start Playback
to start playing back the camera. Refer to Chapter 7.5.7 Playback for reference. The
temperature measurement, fire source detection, ship detection and VCA information can
be played back.
(Optional) You can click or click Stop VCA Decoding from the right-click menu to stop
VCA decoding of the thermal network camera.
Controlling Remote Screen
Purpose
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
81
Installed with the RSC Server, it allows you to show your PC screen on the video wall. Follow the
following procedure to configure the RSC server and get your screen shown on the video wall.
Configuring the RSC Server
Install the RSE Server, which enables the PC screen to be displayed on the video wall, and
double-click to run it.
Run the RSC Server
You can click Status to check the server information, including the IP address, name, port,
password of the server, and the connected device number.
Click Settings to check the directory of saving the program files, enable or disable the
feature of Auto-Run when OS starts, and select the language (Chinese/English).
Local Configuration of RSC Server
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
82
Controlling Remote Screen via RSC Server
Enter the Video Wall interface and click in the Camera list area, or click on
Device Management interface to add the RSC server.
Add RSC Server
Enter the parameters to add the RSC server. Please refer to Chapter 7.1 Adding an Encoding
/Decoding Device to add the RSC server.
The default user name is admin and the server password is 12345 and we highly recommend
you to change the default password to avoid the security problem.
The successfully added RSC server is listed in the camera list.
Added RSC Server
On the camera list, drag the RSC server to the video output window.
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
83
Link RSC to Video Wall
Right-click on the window and select Screen Control to remotely control the signal source.
The RSC server supports the screen control for 1-channel video output only.
You can use the toolbar on the window’s upper right corner to realize the operations for
image, video, PPT and remark.
Screen Control Interface
Click to display all the image files in the directory set in the RSC Sever.
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
84
Screen Control Interface (1)
Click to display all the video files in the directory set in the RSC Sever.
Screen Control Interface (2)
Click to display all the PPT files in the directory set in the RSC Sever.
Screen Control Interface (3)
Click to pop up the following remark tool bar. You can select a color and set the line width
to make remarks on the PPT.
Remark Tool Bar
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
85
Remote Configuration
Purpose
On the Remote Configuration interface, you can configure the parameters of the added device,
including the system, network, event, etc..
On the Device Management interface, click to select an added device from the list and click
Remote Configuration to enter Remote Configuration interface.
Remote Configuration
Configure the System parameters, Network parameters and Event parameters on the
Remote Configuration interface.
Configuring Ethernet Channel
Purpose
The Ethernet Channel is port link aggregation technology or port-channel architecture used
for the connection between the switches.
Click Remote Configuration > Network > Ethernet Channel to enter the Ethernet Channel
Settings interface.
Select a link number from the list.
Check the checkbox to select the network interfaces to form a channel-group link, which can
effectively enhance the link transmission bandwidth.
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
86
Ethernet Channel Settings
The Ethernet Channel is not supported by DS-6901UDI.
The switch connected to DS-6900UDI must be configured with the Ethernet Channel as
well.
Two adjacent network interfaces cannot be selected to form a link. For example, you can
select Network Interface 1 and Network Interface 3, or Network Interface 2 and Network
Interface 4.
The network interface 1 corresponds to the GE1 interface, network interface 2 to G1,
network interface 3 to GE2, and network interface 3 to G2 on the rear panel.
The G1 and G2 can be used as 2G switch when the network interface 2 and network
interface 4 are configured in Ethernet Channel.
Stream Media Server Configuration
Purpose
When the device network access channel number reaches the limit, or the network bandwidth is
limited, you can realize real-time data transmission via stream media server to decrease the
network pressure of the device.
Installing Stream Media Server
When you install iVMS-4200 video wall client software, install stream media server in the same
layer of directory of the video wall client software.
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
87
Running Stream Media Server
Double click the desktop shortcut icon , or enter the installation directory (default: iVMS-4200
Video Wall\iVMS-4200 Stream Media Server), to open the stream media server. The main page is
shown as below.
Stream Media Server
will appear in the taskbar in the lower right corner of the desktop, indicating the server is
running normally.
Adding Stream Media Server
Open iVMS-4200 video wall client software.
Click Device Management.
Click Add SMS.
Add Stream Media Server
Input Nickname, Address, and Port.
Click Add to add the server.
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
88
Configuring Stream Media Server
In Default Disabled Token Authentication Mode
Token authentication is disabled by default. In the default disabled mode, follow the steps
below to configure stream media server.
Select the added stream media and click SMS Settings on Device Management interface to
set stream media server.
1) Check the groups or channels needing to get stream via stream media.
2) Click OK to save the settings.
Stream Media Server Settings
Result: The groups or channels getting stream via stream media will get stream again via stream
media. Open the stream media server, and the channels getting stream via stream media will be
displayed.
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
89
Stream Media Status
In Enabled Token Authentication Mode
You can enable token authentication by editing Setup file of iVMS-4200 Video Wall Client and
Plugin file of iVMS-4200 Video Wall Stream Media Server. In the enabled mode, follow the
steps below to enable token authentication and configure stream media server.
Before you start
After the installation of iVMS-4200 video wall client, go to the installation directory of iVMS-
4200 video wall client (default: C:\Program Files\iVMS-4200 Video Wall\iVMS-4200 Video
Wall Client).
Select Setup.xml.
Right click the file and click Edit.
Change <Value>false</Value> of <StreamServerIdentityAuthentication> to
<Value>true</Value>.
Edit Setup File
Save the settings.
After the installation of stream media server, go to the installation directory of stream media
server (default: C:\Program Files\iVMS-4200 Video Wall\iVMS-4200 Video Wall Stream
Media Server).
Select Plugin.xml.
DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manual
90
Right click the file and click Edit.
Edit <identify enable="0"/> to <identify enable="1"/> to enable token authentication.
Edit Plugin File
Save the settings.
Steps
Click System Configuration of iVMS-4200 video wall client software.
Click Export to export Stream Media Safety Authentication Configuration to the local PC.
Export Stream Media Safety Authentication Configuration
Import the stream media safety authentication configuration to the stream media server.
1) Run the stream media server.
2) Click Configuration.
3) Click Import to import the stream media safety authentication configuration to the
server.
98

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Hikvision DS-6908UDI bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Hikvision DS-6908UDI in de taal/talen: Engels als bijlage per email.

De handleiding is 4,08 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info