Handleiding Hikvision DS-2CD7233 (pagina 23 van 94) (Engels)

662702

Verklein

Vergroot

Pagina terug

1/94

Pagina verder

Network Camera

User Manual

V4.1.0

UD.6L0201D0129A01

Hikvision Digital Technology Co., Ltd.

http://www.hikvision.com

User Manual of Network Camera

This manual is applied to the following camera models:

Type

Model

Box

camera III

DS-2CD883F-E(W), DS-2CD855(F)-E, DS-2CD854F(WD)-E(W),

DS-2CD853F-E(W), DS-2CD864F(WD)-E(W), DS-2CD863PF(NF)-E(W),

DS-2CD893PFWD(NFWD)-E(W), DS-2CD833F-E(W),

DS-2CD893PF(NF)-E(W)

Dome

camera III

DS-2CD733F-E(I)(Z), DS-2CD793PF(NF)-E(I)(Z),

DS-2CD793PFWD(NFWD)-E(I)(Z), DS-2CD763PF(NF)-E(I)(Z),

DS-2CD764FWD-E(I)(Z), DS-2CD764F-E(I)(Z), DS-2CD753F-E(I)(Z),

DS-2CD754F-E(I)(Z), DS-2CD754FWD-E(I)(Z)(B),

DS-2CD783F-E(I)(Z), DS-2CD755F-E(I)(Z)

Dome

camera IV

DS-2CD7233F-E(I)Z(H)(S), DS-2CD7253F-E(I)Z(H)(S),

DS-CD7254F-E(I)Z(H)(S), DS-CD7254FWD- E(I)Z(H)(S),

DS-2CD7255F- E(I)Z(H)(S), DS-2CD7283F-E(I)Z(H)(S),

DS-2CD7293PFWD(NFWD)- E(I)Z(H)(S),

DS-2CD7263NF(PF)- E(I)Z(H)(S), DS-2CD 7264FWD- E(I)Z(H)(S),

DS-2CD7293PF(NF)- E(I)Z(H)(S)

Dome

camera V

DS-2CD2312-I, DS-2CD2332-I

Dome

camera VI

DS-2CD2112-I, DS-2CD2132-I

Dome

Camera VII

DS-2CD7353F-E(I)(S), DS-2CD7393(PF)(NF)(WD)-E(I)(S)

Bullet

Camera I

DS-2CD8253F- E(I)(Z)(S), DS-2CD8233F-E(I)(Z)(S),

DS-2CD8264FWD-E(I)(Z)(S), DS-2CD8264F-E(I)(Z)(S),

DS-2CD8254F- E(I)(Z)(S), DS-2CD8254FWD- E(I)(Z)(S),

DS-2CD8283F- E(I)(Z)(S), DS-2CD8255F- E(I)(Z)(S)

Bullet

Camera II

DS-2CD833-EI3, DS-2CD864-EI(3)(5), DS-2CD855-EI(3)(5)

Bullet

Camera III

DS-2CD2012-I, DS-2CD2032-I

Bullet

Camera IV

DS-2CD2212-I, DS-2CD2232-I

Cube

Camera I

DS-2CD8133F-E(I)(W), DS-2CD8153F-E(I)(W)

Cube

Camera II

DS-2CD8464F-E(I)(W), DS-2CD8433F-E(I)(W)

Mini

Dome

Camera

DS-2CD7164-E,DS-2CD7153-E, DS-2CD7133-E

User Manual of Network Camera

Thank you for purchasing our product. If there are any questions, or requests, please

do not hesitate to contact the dealer.

This manual applies to Network Camera.

This manual may contain several technical incorrect places or printing errors, and the

content is subject to change without notice. The updates will be added to the new

version of this manual. We will readily improve or update the products or procedures

described in the manual.

DISCLAIMER STATEMENT

“Underwriters Laboratories Inc. (“UL”) has not tested the performance or reliability

of the security or signaling aspects of this product. UL has only tested for fire, shock

or casualty hazards as outlined in UL’s Standard(s) for Safety, UL60950-1. UL

Certification does not cover the performance or reliability of the security or signaling

aspects of this product. UL MAKES NO REPRESENTATIONS, WARRANTIES OR

CERTIFICATIONS WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY OF

ANY SECURITY OR SIGNALING RELATED FUNCTIONS OF THIS PRODUCT.”

User Manual of Network Camera

Regulatory Information

FCC Information

FCC compliance: This equipment has been tested and found to comply with the limits

for a digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his

own expense.

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may

cause undesired operation.

EU Conformity Statement

This product and - if applicable - the supplied accessories too are

marked with "CE" and comply therefore with the applicable

harmonized European standards listed under the Low Voltage Directive

2006/95/EC, the EMC Directive 2004/108/EC.

2002/96/EC (WEEE directive): Products marked with this symbol cannot

be disposed of as unsorted municipal waste in the European Union.

For proper recycling, return this product to your local supplier upon

the purchase of equivalent new equipment, or dispose of it at

designated collection points. For more information see: www.recyclethis.info.

2006/66/EC (battery directive): This product contains a battery that

cannot be disposed of as unsorted municipal waste in the European

Union. See the product documentation for specific battery information.

The battery is marked with this symbol, which may include lettering to

indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the

battery to your supplier or to a designated collection point. For more information see:

www.recyclethis.info.

User Manual of Network Camera

Safety Warnings and Cautions

Please pay attention to the following warnings and cautions:

Hazardous Voltage may be present: Special measures and

precautions must be taken when using this device. Some potentials

(voltages) on the device may present a hazard to the user. This

device should only be used by employees from our company with

knowledge and training in working with these types of devices that

contain live circuits.

Power Supply Hazardous Voltage: AC mains voltages are present within the power

supply assembly. This device must be connected to a UL approved, completely

enclosed power supply, of the proper rated voltage and current. No user serviceable

parts inside the power supply.

System Grounding (Earthing): To avoid shock, ensure that all AC wiring is not

exposed and that the earth grounding is maintained. Ensure that any equipment to

which this device will be attached is also connected to properly wired grounded

receptacles and are approved medical devices.

Power Connect and Disconnect: The AC power supply cord is the

main disconnect device to mains (AC power).The socket outlet shall

be installed near the equipment and shall be readily accessible.

Installation and Maintenance: Do not connect/disconnect any

cables to or perform installation/maintenance on this device during an electrical

storm.

User Manual of Network Camera

Power Cord Requirements: The connector that plugs into the wall outlet must be a

grounding-type male plug designed for use in your region. It must have certification

marks showing certification by an agency in your region. The connector that plugs

into the AC receptacle on the power supply must be an IEC 320, sheet C13, female

connector. See the following website for more information

http://kropla.com/electric2.htm.

Lithium Battery: This device contains a Lithium Battery. There is a

risk of explosion if the battery is replaced by an incorrect type.

Dispose of used batteries according to the vendor’s instructions

and in accordance with local environmental regulations.

Perchlorate Material: Special handling may apply. See

www.dtsc.ca.gov/hazardouswaste/perchlorate. This notice is required by California

Code of Regulations, Title 22, Division 4.5, Chapter 33: Best Management Practices

for Perchlorate Materials. This device includes a battery which contains perchlorate

material.

Taiwan battery recycling:

Please recycle batteries.

Thermal and Mechanical Injury: Some components such as heat

sinks, power regulators, and processors may be hot; care should

be taken to avoid contact with these components.

Electro Magnetic Interference: This equipment has not been

tested for compliance with emissions limits of FCC and similar international

regulations. This device is not, and may not be, offered for sale or lease, or sold, or

leased until authorization from the United States FCC or its equivalent in other

countries has been obtained. Use of this equipment in a residential location is

prohibited. This equipment generates, uses and can radiate radio frequency energy

which may result in harmful interference to radio communications. If this equipment

does cause harmful interference to radio or television reception, which can be

User Manual of Network Camera

determined by turning the equipment on and off, the user is required to take

measures to eliminate the interference or discontinue the use of this equipment.

Lead Content:

Please recycle this device in a responsible manner. Refer to

local environmental regulations for proper recycling; do not

dispose of device in unsorted municipal waste.

User Manual of Network Camera

Safety Instruction

These instructions are intended to ensure that the user can use the product correctly

to avoid danger or property loss.

The precaution measure is divided into ‘Warnings’ and ‘Cautions’:

Warnings: Serious injury or death may be caused if any of these warnings are

neglected.

Cautions: Injury or equipment damage may be caused if any of these cautions are

neglected.

Warnings Follow these safeguards to

prevent serious injury or death.

Cautions Follow these precautions to

prevent potential injury or material

damage.

Warnings:

 Please adopt the power adapter which can meet the safety extra low voltage

(SELV) standard. And source with DC 12V or AC 24V (depending on models)

according to the IEC60950-1 and Limited Power Source standard.

 If the product does not work properly, please contact your dealer or the nearest

service center. Never attempt to disassemble the camera yourself. (We shall not

assume any responsibility for problems caused by unauthorized repair or

maintenance.)

 To reduce the risk of fire or electrical shock, do not expose this product to rain or

moisture.

 This installation should be made by a qualified service person and should

conform to all the local codes.

 Please install blackouts equipment into the power supply circuit for convenient

supply interruption.

 Please make sure that the ceiling can support more than 50(N) Newton gravities

if the camera is fixed to the ceiling.

 If the product does not work properly, please contact your dealer or the nearest

service center. Never attempt to disassemble the camera yourself. (We shall not

assume any responsibility for problems caused by unauthorized repair or

maintenance.)

User Manual of Network Camera

Cautions:

 Make sure the power supply voltage is correct before using the camera.

 Do not drop the camera or subject it to physical shock.

 Do not touch sensor modules with fingers. If cleaning is necessary, use a clean

cloth with a bit of ethanol and wipe it gently. If the camera will not be used for

an extended period of time, put on the lens cap to protect the sensor from dirt.

 Do not aim the camera lens at the strong light such as sun or incandescent lamp.

The strong light can cause fatal damage to the camera.

 The sensor may be burned out by a laser beam, so when any laser equipment is

being used, make sure that the surface of the sensor not be exposed to the laser

beam.

 Do not place the camera in extremely hot, cold temperatures (the operating

temperature should be between -10°C ~ 60°C ), dusty or damp environment, and

do not expose it to high electromagnetic radiation.

 To avoid heat accumulation, good ventilation is required for a proper operating

environment.

 Keep out of water and any liquid.

 While shipping, the camera should be packed in its original packing.

 Improper use or replacement of the battery may result in hazard of explosion.

Please use the manufacturer recommended battery type.

User Manual of Network Camera

Contents

CHAPTER 1 SYSTEM REQUIREMENT ...................................................................................... 11

CHAPTER 2 NETWORK CONNECTION..................................................................................... 12

2.1 SETTING THE NETWORK CAMERA OVER THE LAN .................................................................................. 12

2.1.1 Wiring over the LAN ................................................................................................................ 12

2.1.2 Detecting and Changing the IP Address ................................................................................. 13

2.2 SETTING THE NETWORK CAMERA OVER THE WAN ................................................................................ 14

2.2.1 Static IP Connection ................................................................................................................ 14

2.2.2 Dynamic IP Connection ........................................................................................................... 15

CHAPTER 3 ACCESS TO THE NETWORK CAMERA .................................................................... 17

3.1 ACCESSING BY WEB BROWSERS........................................................................................................... 17

3.2 ACCESSING BY CLIENT SOFTWARE ........................................................................................................ 19

3.2.1 Installing iVMS-4200 Software................................................................................................ 19

3.2.2 Installing iVMS-4500 Software................................................................................................ 20

CHAPTER 4 WI-FI SETTINGS .................................................................................................. 20

4.1 CONFIGURING WI-FI CONNECTION IN MANAGE AND AD-HOC MODES ..................................................... 21

4.2 EASY WI-FI CONNECTION WITH WPS FUNCTION................................................................................... 25

4.3 IP PROPERTY SETTINGS FOR WIRELESS NETWORK CONNECTION .............................................................. 27

CHAPTER 5 LIVE VIEW .......................................................................................................... 28

5.1 LIVE VIEW PAGE ................................................................................................................................ 28

5.2 STARTING LIVE VIEW ......................................................................................................................... 29

5.3 RECORDING AND CAPTURING PICTURES MANUALLY ............................................................................... 30

5.4 OPERATING PTZ CONTROL ................................................................................................................. 30

5.4.1 PTZ Control Panel .................................................................................................................... 31

5.4.2 Setting / Calling a Preset ......................................................................................................... 31

5.5 CONFIGURING LIVE VIEW PARAMETERS ................................................................................................ 32

CHAPTER 6 NETWORK CAMERA CONFIGURATION ................................................................. 33

6.1 CONFIGURING LOCAL PARAMETERS...................................................................................................... 33

6.2 CONFIGURING TIME SETTINGS ............................................................................................................ 34

6.3 CONFIGURING NETWORK SETTINGS ..................................................................................................... 36

6.3.1 Configuring TCP/IP Settings..................................................................................................... 36

6.3.2 Configuring Port Settings ........................................................................................................ 37

6.3.3 Configuring PPPoE Settings ..................................................................................................... 38

6.3.4 Configuring DDNS Settings ...................................................................................................... 39

6.3.5 Configuring SNMP Settings ..................................................................................................... 41

6.3.6 Configuring 802.1X Settings .................................................................................................... 42

6.3.7 Configuring QoS Settings ........................................................................................................ 43

6.3.8 Configuring FTP Settings ......................................................................................................... 43

6.3.9 Configuring UPnP™ Settings ................................................................................................... 44

User Manual of Network Camera

6.4 CONFIGURING VIDEO AND AUDIO SETTINGS ......................................................................................... 45

6.4.1 Configuring Video Settings ..................................................................................................... 45

6.4.2 Configuring Audio Settings ..................................................................................................... 47

6.5 CONFIGURING IMAGE PARAMETERS ..................................................................................................... 47

6.5.1 Configuring Display Settings ................................................................................................... 47

6.5.2 Configuring OSD Settings ........................................................................................................ 49

6.5.3 Configuring Text Overlay Settings ........................................................................................... 50

6.5.4 Configuring Privacy Mask ........................................................................................................ 51

6.5.5 Configuring Picture Overlay .................................................................................................... 52

6.6 CONFIGURING AND HANDLING ALARMS ............................................................................................... 53

6.6.1 Configuring Motion Detection ................................................................................................ 53

6.6.2 Configuring Tamper-proof Alarm............................................................................................ 56

6.6.3 Configuring Video Loss Alarm................................................................................................. 57

6.6.4 Configuring External Alarm Input ........................................................................................... 58

6.6.5 Configuring Alarm Output....................................................................................................... 60

6.6.6 Handling Exception .................................................................................................................. 61

6.6.7 Configuring Email Settings ...................................................................................................... 61

6.6.8 Configuring Snapshot Settings ................................................................................................ 63

6.6.9 Configuring Other Alarms ....................................................................................................... 64

6.6.10 Arming or Disarming the Camera ...................................................................................... 69

CHAPTER 7 STORAGE SETTINGS ............................................................................................ 71

7.1 CONFIGURING NAS SETTINGS.............................................................................................................71

7.2 CONFIGURING RECORDING SCHEDULE.................................................................................................. 72

CHAPTER 8 PLAYBACK .......................................................................................................... 77

CHAPTER 9 LOG SEARCHING ................................................................................................. 79

CHAPTER 10 OTHERS ............................................................................................................. 80

10.1 MANAGING USER ACCOUNTS ............................................................................................................. 80

10.2 CONFIGURING RTSP AUTHENTICATION ................................................................................................ 82

10.3 ANONYMOUS VISIT ........................................................................................................................... 82

10.4 IP ADDRESS FILTER ............................................................................................................................ 83

10.5 VIEWING DEVICE INFORMATION .......................................................................................................... 85

10.6 MAINTENANCE ................................................................................................................................. 86

10.6.1 Rebooting the Camera ........................................................................................................ 86

10.6.2 Restoring Default Settings .................................................................................................. 86

10.6.3 Importing/Exporting Configuration File ............................................................................ 86

10.6.4 Upgrading the System ......................................................................................................... 87

10.7 RS-232 SETTINGS............................................................................................................................. 87

10.8 RS-485 SETTINGS............................................................................................................................. 88

APPENDIX ................................................................................................................................ 89

APPENDIX 1 SADP SOFTWARE INTRODUCTION .................................................................................................. 89

APPENDIX 2 PORT MAPPING ........................................................................................................................... 91

User Manual of Network Camera

Chapter 1 System Requirement

Operating System: Microsoft Windows XP SP1 and above version / Vista / Win7 /

Server 2003 / Server 2008 32bits

CPU: Intel Pentium IV 3.0 GHz or higher

RAM: 1G or higher

Display: 1024×768 resolution or higher

Web Browser: Internet Explorer 6.0 and above version, Apple Safari 5.02 and above

version, Mozilla Firefox 3.5 and above version and Google Chrome8 and above

versions.

User Manual of Network Camera

Chapter 2 Network Connection

Before you start:

 If you want to set the network camera via a LAN (Local Area Network), please

refer to Section 2.1 Setting the Network Camera over the LAN.

 If you want to set the network camera via a WAN (Wide Area Network), please

refer to Section 2.2 Setting the Network Camera over the WAN.

2.1 Setting the Network Camera over the LAN

Purpose:

To view and configure the camera via a LAN, you need to connect the network

camera in the same subnet with your computer, and install the SADP or iVMS-4200

software to search and change the IP of the network camera.

Note: For the detailed introduction of SADP, please refer to Appendix 1.

2.1.1 Wiring over the LAN

The following figures show the two ways of cable connection of a network camera

and a computer:

Purpose:

 To test the network camera, you can directly connect the network camera to the

computer with a network cable as shown in Figure 2-1.

 Refer to the Figure 2-2 to set the network camera over the LAN via a switch or a

router.

Figure 2-1 Connecting Directly

Figure 2-2 Connecting via a Switch or a Router

User Manual of Network Camera

2.1.2 Detecting and Changing the IP Address

You need the IP address to visit the network camera.

Steps:

1. To get the IP address, you can choose either of the following methods:

 Use SADP, a software tool which can automatically detect the online

network cameras in the LAN and list the device information including IP

address, subnet mask, port number, device serial number, device version,

etc., shown in Figure 2-3.

 Use the client software to list the online devices. Please refer to the user

manual of client software for detailed information.

2. Change the IP address and subnet mask to the same subnet as that of your

computer.

3. Enter the IP address of network camera in the address field of the web browser

to view the live video.

Notes:

 The default IP address is 192.0.0.64 and the port number is 8000. The default

user name is admin, and password is 12345.

 For accessing the network camera from different subnets, please set the gateway

for the network camera after you logged in. For detailed information, please

refer to Section 5.3.1 Configuring TCP/IP Settings.

Figure 2-3 SADP Interface

User Manual of Network Camera

2.2 Setting the Network Camera over the WAN

Purpose:

This section explains how to connect the network camera to the WAN with a static IP

or a dynamic IP.

2.2.1 Static IP Connection

Before you start:

Please apply a static IP from an ISP (Internet Service Provider). With the static IP

address, you can connect the network camera via a router or connect it to the WAN

directly.

 Connecting the network camera via a router

Steps:

1. Connect the network camera to the router.

2. Assign a LAN IP address, the subnet mask and the gateway. Refer to Section 2.1.2

Detecting and Changing the IP Address for detailed IP address configuration of

the camera.

3. Save the static IP in the router.

4. Set port mapping, E.g., 80, 8000, 8200 and 554 ports. The steps for port mapping

vary depending on different routers. Please call the router manufacturer for

assistance with port mapping.

Note: Refer to Appendix 2 for detailed information about port mapping.

5. Visit the network camera through a web browser or the client software over the

internet.

Figure 2-4 Accessing the Camera through Router with Static IP

 Connecting the network camera with static IP directly

You can also save the static IP in the camera and directly connect it to the internet

without using a router. Refer to Section 2.1.2 Detecting and Changing the IP Address

for detailed IP address configuration of the camera.

Figure 2-5 Accessing the Camera with Static IP Directly

User Manual of Network Camera

2.2.2 Dynamic IP Connection

Before you start:

Please apply a dynamic IP from an ISP. With the dynamic IP address, you can connect

the network camera to a modem or a router.

 Connecting the network camera via a router

Steps:

1. Connect the network camera to the router.

2. In the camera, assign a LAN IP address, the subnet mask and the gateway. Refer

to Section 2.1.2 Detecting and Changing the IP Address for detailed LAN

configuration.

3. In the router, set the PPPoE user name, password and confirm the password.

4. Set port mapping. E.g. 80, 8000, 8200 and 554 ports. The steps for port mapping

vary depending on different routers. Please call the router manufacturer for

assistance with port mapping.

Note: Refer to Appendix 2 for detailed information about port mapping.

5. Apply a domain name from a domain name provider.

6. Configure the DDNS settings in the setting interface of the router.

7. Visit the camera via the applied domain name.

 Connecting the network camera via a modem

Purpose:

This camera supports the PPPoE auto dial-up function. The camera gets a public IP

address by ADSL dial-up after the camera is connected to a modem. You need to

configure the PPPoE parameters of the network camera. Refer to Section 5.3.3

Configuring PPPoE Settings for detailed configuration.

Figure 2-6 Accessing the Camera with Dynamic IP

Note: The obtained IP address is dynamically assigned via PPPoE, so the IP address

always changes after rebooting the camera. To solve the inconvenience of the

dynamic IP, you need to get a domain name from the DDNS provider (E.g.

DynDns.com). Please follow below steps for normal domain name resolution and

private domain name resolution to solve the problem.

 Normal Domain Name Resolution

User Manual of Network Camera

Figure 2-7 Normal Domain Name Resolution

Steps:

1. Apply a domain name from a domain name provider.

2. Configure the DDNS settings in the DDNS Settings interface of the network

camera. Refer to Section 5.3.4 Configuring DDNS Settings for detailed

configuration.

3. Visit the camera via the applied domain name.

 Private Domain Name Resolution

Figure 2-8 Private Domain Name Resolution

Steps:

1. Install and run the IP Server software in a computer with a static IP.

2. Access the network camera through the LAN with a web browser or the client

software.

3. Enable DDNS and select IP Server as the protocol type. Refer to Section 5.3.4

Configuring DDNS Settings for detailed configuration.

User Manual of Network Camera

Chapter 3 Access to the Network

Camera

3.1 Accessing by Web Browsers

Steps:

1. Open the web browser.

2. In the address field, input the IP address of the network camera, e.g., 192.0.0.64

and press the Enter key to enter the login interface.

3. Input the user name and password and click .

Note: The default user name is admin, password is 12345.

Figure 3-1 Login Interface

4. Install the plug-in before viewing the live video and operating the camera.

Please follow the installation prompts to install the plug-in.

User Manual of Network Camera

Figure 3-2 Download and Install Plug-in

Figure 3-3 Install Plug-in (1)

Figure 3-4 Install Plug-in (2)

User Manual of Network Camera

Figure 3-5 Install Plug-in (3)

Note: You may have to close the web browser to install the plug-in. Please reopen

the web browser and log in again after installing the plug-in.

3.2 Accessing by Client Software

3.2.1 Installing iVMS-4200 Software

The product CD contains the iVMS-4200 client software. You can view the live video

and manage the camera with the client software. You can also download the

software from our website www.hikvision.com.

Follow the installation prompts to install the client software and WinPcap. The

control panel and live view interface of iVMS-4200 are shown as bellow.

User Manual of Network Camera

Figure 3-6 iVMS-4200 Control Panel

Figure 3-7 iVMS-4200 Live View Interface

Note: For detailed information about iVMS-4200 client software, please refer to the

user manual of the iVMS-4200 software.

3.2.2 Installing iVMS-4500 Software

To view the camera with a mobile phone, install the iVMS-4500 client software in

your mobile phone. You can find the software in the CD in the package, and you can

also download the software from our website www.hikvision.com.

Note: For detailed information about iVMS-4500 client software, please refer to the

user manual of iVMS-4500 software.

Chapter 4 Wi-Fi Settings

Purpose:

By connecting to the wireless network, you don’t need to use cable of any kind for

network connection, which is very convenient for the actual surveillance application.

Note:

This chapter is only applicable for the cameras with the Wi-Fi module built-in.

User Manual of Network Camera

4.1 Configuring Wi-Fi Connection in Manage and

Ad-hoc Modes

Before you start:

A wireless network must be configured.

Wireless Connection in Manage Mode

Steps:

1. Enter the Wi-Fi configuration interface.

Configuration> Advanced Configuration> Network> Wi-Fi

Figure 4-1 Wireless Network List

2. Click button to search the online wireless connections.

3. Click to choose a wireless connection on the list.

Figure 4-2 Wi-Fi Setting- Manage Mode

4. Check the checkbox to select the Network mode as Manage, and the Security

mode and the Encryption Type of the network is automatically shown when

you select the wireless network, please don’t change it manually.

Note: These parameters are exactly identical with those of the router.

5. Enter the key to connect the wireless network. The key should be that of the

wireless network connection you set on the router.

Wireless Connection in Ad-hoc Mode

User Manual of Network Camera

If you choose the Ad-hoc mode, you don’t need to connect the wireless camera

via a router. The scenario is the same as you connect the camera and the PC directly

with a network cable.

Steps:

1. Choose Ad-hoc mode.

Figure 4-3 Wi-Fi Setting- Ad-hoc

2. Customize a SSID for the camera.

3. Choose the Security Mode of the wireless connection.

Figure 4-4

Figure 4-5 Security Mode- Ad-hoc Mode

4. Enable the wireless connection function for your PC.

5. On the PC side, search the network and you can see the SSID of the

camera listed.

Figure 4-6 Ad-hoc Connection Point

6. Choose the SSID and connect.

Security Mode Description:

Hikvision DS-2CD7233 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Hikvision DS-2CD7233

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info