742746
13
Verklein
Vergroot
Pagina terug
1/148
Pagina verder
– 13 –– 13 –
en
de
fr
it
nl
es
pt
sv
da
no
INSTALLING THE SAW MOUNTING BRACKETS
(FIG. E)
1. Press the locking button (1) and lift up on the cam
latch (2).
2. Place the rear holding clamp (3) on the back rail of
the stand, and then lower the front end of the saw
mounting bracket over the front rail of the stand.
NOTE: Place the saw mounting brackets on the
interior side of the bracket stoppers.
3. Slide the saw mounting bracket to the desired
position, and then push down the cam latch (2) to
lock.
4. Repeat the above steps for the other saw mounting
bracket.
Fig. E
3
1
2
INSTALLING THE ANCHOR PLATES (FIG. F, G)
Please follow the steps below to install the anchor plates
to make the stand stable for operation.
1. Insert an anchor plate (1) through one stand leg (2)
directly, and x the anchor plate (1) to the ground
surface with an anchor (screw, bolt, peg etc.) which
is suitable for the type of ground surface (soil, wood
ooring, concrete etc.).
2. Insert the other anchor plate to diagonal stand leg as
shown in Fig. G. Fix the anchor plate to the ground in
the same way.
WARNING
Ensure that both anchor plates are xed rmly to the
ground and the stand is stable.
Appropriate way to x the anchor plates may di er
according to the type of ground surface. If the anchor
plates are not rmly xed and the stand is unstable,
please take appropriate measures to x the anchor
plates.
Fig. F
1
2
not included
Fig. G
MOUNTING THE MITER SAW TO THE STAND
WARNING
Do not mount the miter saw to the stand without
rst ensuring the stand is extended fully and locked
securely. To set up the stand, follow the instruction
in section “SETTING UP THE STAND” on page 17.
Failure to do so may result in possible injury and
damage to the stand and the miter saw.
Always use the saw mounting brackets and auxiliary
mounting bracket together when mounting the miter
saw to the stand.
Before operating the mounter miter saw, read
carefully the instruction manual for the miter saw.
Using auxiliary mounting brackets (provided)
(FIG. H, I, J, K)
1. Insert two square nuts (1) into the slot on each end of
both auxiliary mounting brackets (2) and slide them
to the middle of the auxiliary mounting brackets.
(Fig. H)
000Book_UU240F.indb 13000Book_UU240F.indb 13 2019/12/26 10:14:042019/12/26 10:14:04
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Hikoki UU 240F bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Hikoki UU 240F in de taal/talen: Alle talen als bijlage per email.

De handleiding is 35,82 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info