742234
3
Verklein
Vergroot
Pagina terug
1/100
Pagina verder
3
English
AC/DC ADAPTER SAFETY
WARNINGS
1. Please only use the professional power tools speci ed
in this manual and in HiKOKI catalogs. Failure to do so
may result in accident, injury or malfunction.
2. Do not place the box upside down.
Prior to use, place the box LED side up.
3. Please use the product properly.
(1) Always use the charger at the voltage speci ed on the
nameplate. Do not use with boosters or other types of
transformers.
Doing so could result in overheating or re.
(2) Do not use the adapter at temperatures less than
-10°C or at 35°C or higher.
(3) When the adapter is not in use or when being
maintained and inspected, disconnect the power cord
of the adapter from the receptacle.
4. Never short-circuit the rechargeable battery. Short-
circuiting the battery will cause a great electric current
and overheat. It results in burn or damage to the
battery.
5. Do not handle the adapter's power plug with wet
hands. Doing so may result in electric shock.
6. Avoid dangerous environment. Don't expose power
tools and adapter to rain. Don't use power tools and
adapter in damp or wet locations. And keep work
area well lit. Never use power tools and adapter near
ammable or explosive materials. Do not use tool and
adapter in presence of ammable liquids or gases.
7. Do not dispose of the adapter in re. If the adapter is
burnt, it may explode.
8. Never disassemble the adapter.
9. Do not use the product if the tool or the adapter
terminals (battery mount) are deformed. Installing the
adapter could cause a short circuit that could result in
smoke emission or ignition.
10. Keep the tool's terminals (battery mount) free of swarf
and dust. Prior to use, make sure that swarf and dust
have not collected in the area of the terminals. During
use, try to avoid swarf or dust on the tool from falling
on the adapter. When suspending operation or after
use, do not leave the tool in an area where it may be
exposed to falling swarf or dust. Doing so could cause
a short circuit that could result in smoke emission or
ignition.
11. Do not pierce adapter with a sharp object such as a
nail, strike with a hammer, step on, throw or subject
the adapter to severe physical shock.
12. Do not use an apparently damaged or deformed
adapter.
13. Do not use the adapter in reverse polarity.
14. Keep work area clean. Cluttered areas and benches
invite accidents.
15. This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to ensure that they do
not play with the appliance.
16. Store idle tools and adapter. When not in use, tools
and adapter should be stored in dry, high or locked-
up place — out of reach or children. Store tools and
adapter in a place in which the temperature is less
than 40°C.
17. Don’t abuse cord. Never carry AC/DC adapter by cord
or yank it to disconnect from receptacle. Keep cord
from heat, oil and sharp edges.
18. Take good care of the AC/DC adapter.
Prior to use, inspect the plug and cord of the AC/DC
adapter. If there is any damage, contact the place of
purchase for repairs.
19. For repairs, use a store that specializes in AC/DC
adapters.
Persons other than a service person should not take
apart, repair or modify the AC/DC adapter.
Doing so could result in injury from re or malfunction.
If there are any abnormalities to the AC/DC adapter,
send it out to be inspected or repaired.
Do not modify this AC/DC adapter as it conforms to
applicable safety standards.
Always contact the place of purchase for repairs.
Repairing the adapter yourself could result in accident
or injury.
20. The product has built-in precision parts. Avoid
dropping or in icting strong impact.
Doing so may cause malfunction.
21. Make sure that the adapter is installed rmly. If it is as
all loose it could come o and cause an accident.
22. Periodically inspect the product.
23.
Do not use the product if the tool or the AC/DC adapter
terminals (AC/DC adapter mount) are deformed.
Installing the AC/DC adapter could cause a short
circuit that could result in smoke emission or ignition.
24. Keep the tool’s terminals (AC/DC adapter mount) free
of swarf and dust.
Prior to use, make sure that swarf and dust have not
collected in the area of the terminals.
During use, try to avoid swarf or dust on the tool from
falling on the AC/DC adapter.
When suspending operation or after use, do not leave
the tool in an area where it may be exposed to falling
swarf or dust.
Doing so could cause a short circuit that could result
in smoke emission or ignition.
25. To prevent electric shock, connect to a power source
equipped with a ground fault circuit breaker.
26. Prior to use, make sure that the DC cord insulation is
not torn or that the case is not cracked.
Do not use the product if there is a break in the DC
cord, the insulation is torn, or the case is damaged.
27. Before starting operation, make sure that the vicinity
of the boxs vent is free from any wood shavings or
iron powder.
Also, do not use in locations where iron powder is
abundant, or in areas where there is rain, snow or
other water sources that could wet the product.
28. Make sure there are no solid metal material or liquid
in the adapter box. Failure to do so may result in
damage.
29. Be careful not to step on the box. Also, make sure the
box is placed in a location where it won’t be stepped
on. Do not place in a location where the box could be
immersed in water when it rains.
30. The adapter, power supply box and the inside of the
DC cord generates a boosted high voltage of 380 V so
please be careful of the following.
Do not disassemble the product.
Do not drop or expose to impact.
In the event the product is damaged from strong
impact, do not use the product.
Do not use the product in areas exposed to rain, snow,
iron powder or wet condition.
Do not touch the product with wet hands.
Do not spill or pour liquid onto the product.
Do not pull the cord with excessive force.
Use the product in a well-ordered work environment.
31. When the temperature protective feature frequently
cuts the power o , do not overload the machine with
continued work, but let the machine rest for a little
before continuing operation.
000Book_ET36A_EU.indb 3000Book_ET36A_EU.indb 3 2019/04/26 10:13:102019/04/26 10:13:10
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Hikoki ET 36A bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Hikoki ET 36A in de taal/talen: Alle talen als bijlage per email.

De handleiding is 4,67 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info