700144
20
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
20
INTERCONNECTION EXAMPLE
2-channel-mode: 2 x Mono Subwoofers bridged
FUNCTIONAL INSTRUCTIONS
INTERCONNECTION
Connect the RCA lineouts of the head unit with the RCA jacks LINE IN of the amplier with appropriate
high-value RCA cables. If a separate SUB OUT from your head unit is available, use this as LINE OUT.
Connect the subwoofers with the SPEAKER OUTPUTS + BRIDGED -.
Always ensure that the total impedance load per channelpair is not lower than 4 ohms.
Too low impedance cause high temperature and will shut down the amplier operation.
Always ensure the correct polarity of the speakers. The interchange of plus and minus cause total loss of bass playback and could
damage the speakers.
CROSSOVER SETTINGS
The X-OVER switch must be in position LP/BP, then the higher frequencies will be eliminated.
The cut-off frequency ist adjustable with the LP controller and should be set between 60 to 100 Hz, depending
on the size of the subwoofer.
In lowpass mode (LP/BP) the HP controller works also as subsonic lter, that eliminates the ultra-low, not hearable and
harmful frequencies to generate a bandpass signal (Bandpass mode). The subsonic frequency should be set between
15 to 40 Hz, depending on the size of the subwoofer. NOTE: If this value is higher than the lowpass setting, no sound is hearable.
BASS BOOST CONTROLLER
The BASS BOOST controller adjusts the bass enhancement between 0db and +12dB.
LEVEL CONTROLLER
Turn the LEVEL controller of the amplier to the MIN position.
Turn the volume controller of the head unit to 80 - 90% of its full setting.
Turn the LEVEL controller clockwise until you hear some distortion.
Then turn back the LEVEL controller slightly until you hear a cleaner sound.
BASS REMOTE SUBWOOFER
The enclosed Bass Level Controller adjusts the bass-level e.g. from the driver’s seat.
Please use only the enclosed bass remote controller and cable.
Use the bass boost with care.
A high bass boost level may cause damages to your speakers and hearing abilities.
NOTE
POWER INPUT
SPEAKER OUTPUT
LINE OUT
GND +12VREM
LINE IN
R
L
R
L
BRIDGED
RL
VXi4002
LP HP
BP
LEVEL
0dB 12dB
10Hz 1.2kHz35Hz 250Hz
MIN MAX
BASS
BOOST
FULLHPLP/BP
X-OVER MODE
PROTECT
POWER
BASS LEVEL
CONTROLLER
FUSE
POWER INPUT
SPEAKER OUTPUT
LINE OUT
GND +12VREM
LINE IN
R
L
R
L
BRIDGED
RL
VXi4002
LP HP
BP
LEVEL
0dB 12dB
10Hz 1.2kHz35Hz 250Hz
MIN MAX
BASS
BOOST
FULLHPLP/BP
X-OVER MODE
PROTECT
POWER
BASS LEVEL
CONTROLLER
FUSE
Connect stereo RCA output (L/R or SUB OUT)
of the head unit with LINE IN of the amplier
LP/BP
Subwoofer
4 – 8 Ohms
Connect Bass Level Controller
with the enclosed cable
20

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Hifonics VXi6002 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Hifonics VXi6002 in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 7,91 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info