700125
21
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
21
FUNCTIONAL INSTRUCTIONS
3
16
4
10
5
9
13
11
12
7
8
14
15
6
The CH1/2 X-OVER switch selects the required operation mode of the amplier on Channel 1/2.
HP: Highpass mode (The higher frequencies will be eliminated. Adjustable by the HP controller).
FULL: Fullrange mode (All frequencies will be amplied).
The BASS LEVEL CONTROLLER port is for the enclosed bass remote controller in LP/BP mode. With this bass remote cont-
roller you are able to adjust the bass level e.g. from the driver’s seat. Please connect only the enclosed bass remote controller
and cable.
The HP CH1/2 controller (high pass) adjust the cut-off point of the frequency range for Channel 1/2 to below. The cut-off frequen-
cy is continuously adjustable from 50Hz to 4kHz.
The LP CH5 controller (low pass) adjusts the cut-off point of the frequency range of Channel 5 (Subwoofer Channel) to above.
The cut-off frequency is continuously adjustable from 35 Hz to 150 Hz.
The LEVEL CH1/2 controller adjust the input sensitivity of the amplier to align the audio signal of the head unit on Channel 1/2.
The input sensitivity is adjustable from 6 Volts (MIN) and 0.2 Volts (MAX).
The LEVEL CH3/4 controller adjust the input sensitivity of the amplier to align the audio signal of the head unit on Channel 3/4.
The input sensitivity is adjustable from 6 Volts (MIN) and 0.2 Volts (MAX).
The LEVEL CH5 controller adjust the input sensitivity of the amplier to align the audio signal of the head unit on Channel 5
(Subwoofer Channel). The input sensitivity is adjustable from 6 Volts (MIN) and 0.2 Volts (MAX).
The SUBSONIC CH5 controller cuts off the ultra-deep and low inaudible frequencies of the audio signal from the subwoofer
channel. Hence, the subwoofer is not mechanically and electrically overloaded. The cut-off frequency can can be adjusted from
15 and 55 Hz, depending on the size of the subwoofer.
NOTE: If this controller is set higher than the LP controller no audio is hearable.
The BASS BOOST CH5 controller adjust the bass boost enhancement continuously from 0dB to +18dB.
The CH3/4 X-OVER switch selects the required operation mode of the amplier on Channel 3/4.
HP: Highpass mode (The higher frequencies will be eliminated. Adjustable by the HP/BP controller).
FULL: Fullrange mode (All frequencies will be amplied).
BP: Bandpass mode (The HP/BP controller cuts the lower and the LP controller the higher frequencies).
The LP CH3/4 controller adjusts the cut-off point of the frequency range of Channel 3/4 to above. The cut-off frequency is conti-
nuously adjustable from 150 Hz to 4000 Hz.
POWER/PROTECT
If the POWER LED lights up, the amplier is ready for operation.
If the PROTECT LED lights up, a malfunction is indicated. Attend in this case the chapter TROUBLE SHOOTING.
With the INPUT MODE switch you can choose whether you want to drive the amp one pair of RCA cables (position 2CH), with
two pairs of RCA cables (position 4CH) or three pairs of RCA cables (position 5CH). NOTE: If you want to use the AUTO TURN
ON function the switch must be in 2CH position.
The HP/BP CH3/4 controller (high pass / band pass) adjusts the cut-off point of the frequency range for Channel 3/4 to below.
The cut-off frequency is continuously adjustable from 50Hz to 250Hz.
21

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Hifonics ARX5005 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Hifonics ARX5005 in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 7,77 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info