Dear customer,
Please read these user instructions carefully before connecting the appliance to prevent damage due
to improper use. Please pay special attention to the safety regulations.
Safety regulations
Incorrect operation and improper use of the appliance can seriously damage the appliance and
injure users.
The appliance may only be used for the purpose for which it was intended and designed. The
manufacturer is not liable for any damage caused by incorrect operation and improper use.
Keep the appliance and electrical plug away from water and any other liquids. In the unlikely
event that the appliance should fall into water, immediately pull the plug out of the socket and
have the appliance checked by a certified technician. Not following these instructions could
give rise to life-threatening situations.
Never try to open the casing of the appliance yourself.
Do not insert any objects in the casing of the appliance.
Do not touch the plug with wet or damp hands.
Regularly check the plug and cord for any damage. Should the plug or cord be damaged have
it/them repaired by a certified repair company.
Do not use the appliance after it has fallen or is damaged in any other way. Have it checked and
repaired, if necessary, by a certified repair company.
Do not try to repair the appliance yourself. This could give rise to life-threatening situations.
Make sure the cord does not come in contact with sharp or hot objects and keep it away from
open fire. To pull the plug out of the socket, always pull on the plug and not on the cord.
Make sure that no one can accidentally pull the cord (or extension cord) loose or trip over the
cord.
Always keep an eye on the appliance when in use.
Children do not understand that incorrect use of electrical appliances can be dangerous.
Therefore, never let children use home appliances without supervision.
Always pull the plug out of the socket when the appliance is not being used and always before
cleaning.
Warning! As long as the plug is in the socket the appliance is connected to the power source.
Turn off the appliance before pulling the plug out of the socket.
Never carry the appliance by the cord.
Do not use any extra devices that are not supplied along with the appliance.
Only connect the appliance to an earthed 230 VAC electrical socket.
Avoid overloading.
Turn off the appliance after use by removing the plug from the socket.
Always remove the plug from the socket when filling or cleaning the deep fryer.
The electrical installation must satisfy the applicable national and local regulations.
To avoid the risk of fire, do not allow the oil level to drop below the minimum. Always use plenty
of oil in the bowl.
Never use old oil as this increases the risk of fire.
Never use more than 1 kg fries at a time in a 8l bowl (the same applies to 10 and 7.5 litre bowls).
Never use more than 0.5 kg fries at a time in a 4l bowl.
Installation:
Remove the white protective foil from the stainless steel parts.
Screw the knob onto the lid using the M6 screw.
Press the four rubber feet into the bottom of the frame.
Stand the frame on its rubber feet
Install the backing oil container in the frame.
Install the element holder on the support.
NOTE! Ensure that the pin on the support enters the element holder.
