742290
6
Verklein
Vergroot
Pagina terug
1/80
Pagina verder
6
EN
Installation instructions
Remove the appliance from the carton box, then
remove the external and internal packaging and
wrapping.
Check to make sure the appliance is undamaged.
In case of incomplete delivery and damages, DO
NOT use the appliance. Please contact supplier
(See == > Warranty).
Let the appliance stand upright for about 2 hours.
This is to reduce the malfunction of the cooling
system from improper handling during transpor-
tation.
Clean interior surface with warm water and soft
cloth. (See == > Cleaning and Maintenance).
Place the appliance on a horizontal, stable and
heat resist surface that is safe against water
splashes.
Optimum working ambient temperature is be-
tween 16°C and 32°C. Otherwise, the functional-
ity will be limited.
Ensure that there is sufficient ventilation. Keep a
minimum distance of 10cm around the appliance.
Do not block the ventilation holes.
For energy savings, always make sure the door
is closed.
Operation
The appliance is divided into 2 separate zones. The “UPPER ZONE“ and “LOWER ZONE“ of the appliance are
cotrolled independently with the use of the control panel (2).
Upper zone
U1 L1U2 L2U3 L3T1 S1
Lower zone
Temperature control and display
Plug into a suitable electrical outlet, “888” will be
blinked for few seconds and beep sound will be
heard for the default factory setting.
Then, temperature of the upper zone and lower
zone will be shown on the display (U2/L2).
Next, set the temperature in either zone by press-
ing the “+” or “-“ key of button (U1/L1) [Range:
39°F (4°C) to 68°F(20°C)]. The zone temperature
has a tolerance of + / - 5°F (+/- 3°C) from setting
depending on number of stored bottles & ambi-
ent temperature conditions.
Switch ON/OFF
Press and hold S1 button for 3 to 4 seconds to
switch ON / OFF the appliance.
After switch OFF the appliance, both displays (U2
and L2) will become dark.
Interior lighting
Press either U3 or L3 button to turn ON the light
of UPPER ZONE or LOWER ZONE of the appli-
ance correspondingly.
Press again the U3 or L3 button to turn OFF the
light of UPPER ZONE or LOWER ZONE.
The interior light will keep on lighting if it is not
pressed to turn OFF.
Temperature unit conversion
The temperature display can be changed be-
tween Celsius (°C) and Fahrenheit (°F) by press-
ing the button (T1).
Key Lock mode
If no button is touch within 15 seconds, then the
appliance will enter into “Key Lock” mode. Under
the “Key Lock” mode, the button has no response
unless you cancel the “Key Lock” mode.
To cancel the “Key Lock” mode, press & hold
the U1 button (Press both “+” and “-“ keys at the
same time for few seconds). Then, the “Key Lock”
mode will then be cancelled.
Note: The door of the appliance can be locked at
the bottom (8) by the keys (Supplied)
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Hendi 233221 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Hendi 233221 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Pools als bijlage per email.

De handleiding is 1,77 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info