742316
22
Verklein
Vergroot
Pagina terug
1/122
Pagina verder
You should read this user manual carefully before
using the appliance
Bevor Sie das Gerät in Betrieb nehmen, sollten
Sie diese Gebrauchsanweisung aufmerksam lesen
Alvorens de apparatuur in gebruik te nemen dient
u deze gebruiksaanwijzing aandachtig te lezen
Przed uruchomieniem urządzenia należy koniecznie
dokładnie przeczytać niniejszą instrukcję obsługi
Lisez attentivement ce mode d’emploi avant d’utiliser
l’appareil .
Prima di utilizzare l’apparecchio in funzione leggere
attentamente le istruzioni per l’uso.
Citiţi cu atenţie prezentul manual de utilizare înainte
de folosirea aparatului
Внимательно прочитайте руководство пользователя
перед использованием прибора
User manual
Gebrauchsanweisung
Gebruiksaanwijzing
Instrukcja obsługi
Mode d’emploi
Istruzioni per l’utente
Instrucţiunile utilizatorului
Руководство по эксплуатации
Item: 232118
232125
233108
233122
232132
232149
233115
233139
233146
233153
PROFI LINE
REFRIGERATORS AND
FREEZERS
2
INDEX
01 IMPORTANT SAFETY INSTRUCTIONS ...........................3
02 SPECIAL SAFETY REGULATIONS ..................................4
03 GROUNDING INSTALLATION ......................................... 4
04 INTENDED USE ..............................................................5
05 TECHNICAL DATA ...........................................................5
06 BEFORE THE FIRST USE ...............................................7
07 HOW TO USE ...................................................................9
08 CLEANING AND MAINTENANCE ................................13
09 FOOD STORAGE ............................................................14
10 TROUBLESHOOTING .................................................... 14
11 WARRANTY....................................................................15
12 DISCARDING & ENVIRONMENT .................................. 15
Keep this manual with the appliance.
Diese Gebrauchsanweisung bitte beim Gerät aufbewahren.
Bewaar deze handleiding bij het apparaat.
Zachowaj instrukcję urządzenia.
Gardez ces instructions avec cet appareil.
Conservate le istruzioni insieme all’apparecchio.
Păstraţi manualul de utilizare alături de aparat.
Хранить руководство вместе с устройством.
For indoor use only.
Nur zur Verwendung im Innenbereich.
Alleen voor gebruik binnenshuis.
Do użytku wewnątrz pomieszczeń.
Pour l’usage à l’intérieur seulement.
Destinato solo all’uso domestico.
Numai pentru uz casnic.
Использовать только в помещениях.
3
EN
Dear Customer,
Thank you for purchasing this Hendi appliance. Before using the appliance for the first time, please read
this manual carefully, paying particular attention to the safety regulations outlined below.
1. IMPORTANT SAFETY INSTRUCTIONS
This appliance is intended for commercial use only and must not be used for household use.
The appliance must only be used for the purpose for which it was intended and designed. The manufac-
turer is not liable for any damage caused by incorrect operation and improper use.
Keep the appliance and electrical plug away from water and any other liquids. In the event that the appli-
ance should fall into water, immediately remove plug from the socket and do not use until the appliance
has been checked by a certified technician. Failure to follow these instructions could cause a risk to lives.
Never attempt to open the casing of the appliance yourself.
Do not insert any objects in the casing of the appliance.
Do not touch the plug with wet or damp hands.
Danger of electric shock! Do not attempt to repair the appliance yourself. In case of malfunctions,
repairs are to be conducted by qualified personnel only.
Never use a damaged appliance! Disconnect the appliance from the electrical outlet and contact the
retailer if it is damaged.
Warning! Do not immerse the electrical parts of the appliance in water or other liquids. Never hold the
appliance under running water.
Regularly check the power plug and cord for any damage. If the power plug or power cord is damaged, it
must be replaced by a service agent or similarly qualified persons in order to avoid danger or injury.
Make sure the cord does not come in contact with sharp or hot objects and keep it away from open fire.
To pull the plug out of the socket, always pull on the plug and not on the cord.
Ensure that the cord (or extension cord) is positioned so that it will not cause a trip hazard.
Always keep an eye on the appliance when in use.
Warning! As long as the plug is in the socket the appliance is connected to the power source.
Turn off the appliance before pulling the plug out of the socket.
Never carry the appliance by the cord.
Do not use any extra devices that are not supplied along with the appliance.
Only connect the appliance to an electrical outlet with the voltage and frequency mentioned on the appli-
ance label.
Connect the power plug to an easily accessible electrical outlet so that in case of emergency the applian-
ce can be unplugged immediately. To completely switch off the appliance pull the power plug out of the
electrical outlet.
Always turn the appliance off before disconnecting the plug.
Never use accessories other than those recommended by the manufacturer. Failure to do so could pose
a safety risk to the user and could damage the appliance. Only use original parts and accessories.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge.
This appliance must not be used by children under any circumstances.
Keep the appliance and its cord out of reach of children.
Always disconnect the appliance from the mains if it is left unattended or is not in use, and before as-
4
EN
sembly, disassembly or cleaning.
Never leave the appliance unattended during use.
2. SPECIAL SAFETY REGULATIONS
This appliance is designed for short-time storage of cake for display to customer under low temperature.
Do not store any other materials in the appliance. Do not place any dangerous products, such as fuel,
alcohol, paint, flammable or explosives, etc. inside or near the appliance. No medicine is allowed to keep
inside the appliance.
Products put in the appliance must be already pre-cooled. Otherwise, moisture evaporating while cooling
food products can condensate inside the cooling compartment, which is natural and does not indicate
any malfunction of the appliance.
This appliance must be installed, commissioned and services by a qualified or trained person. And this
appliance is intended to be used by trained or qualified personnel such as kitchen or bar staff.
WARNING: Do not use mechanical devices or other means to accelerate the defrosting process, other
than those recommended by the manufacturer.
WARNING: Do not damage the refrigerant circuit.
The refrigerant used is in appliances. It is a highly flammable refrigerant.
WARNING: Keep all ventilation openings in the appliance enclosure clear of obstruction. Provide
sufficient ventilation in the surrounding structure when building-in. Never block the air flow suction and
air outlet in order to keep air circulation.
WARNING: Do not use electrical appliances inside the food storage compartments of the appliance,
unless they are of the type recommended by the manufacturer.
Place the appliance on a clean, stable, dry, level surface only.
Keep the appliance away from any hot surfaces and open flames. Protect the appliance against heat,
dust, direct sunlight, moisture, dripping and splashing water.
Allow at least 50 cm surrounding spacing for ventilation purpose during use.
Do not use hard utensils to hit the glass surface. Do not use water jet, flush directly with water or steam
cleaner as the parts will get wet and electric shock might be resulted.
Do not place articles on top of the appliance. Do not place objects with open sources of fire (e.g. candles)
on top or beside the appliance. Do not place objects filled with water (e.g. vases) on or near the applian-
ce.
Never cover the appliance during use. This may cause a fire hazard.
Do not wash the appliance with water. Washing can cause leakages and increase the risk of electric
shock.
Do not make any additional openings on the appliance. Do not install any gadgets in the appliance.
Do not overload the shelves inside to avoid damage. Max. loading of each shelf is about 40kg. Place the
food evenly on each shelf.
Do not attempt to climb up to the top of the appliance.
3. GROUNDING INSTALLATION
This appliance is classified as protection class I appliance and must be connected to a protective ground.
Grounding reduces the risk of electric shock by providing an escape wire for the electric current. This appli-
ance is equipped with a cord having a grounding wire with a grounding plug. The plug must be plugged into
min. height 15mm :
5
EN
an outlet that is properly installed and grounded.
In case of electrical or refrigeration failure, service agent authorized by the manufacturer or professional
maintenance staff shall be responsible for the maintenance work in case of danger or expanded failure.
4. INTENDED USE
Cooling appliances are designed for short-time
storage of food at a lower temperature for display
to the customer.
Freezing appliances are designed to store fresh
food with an extended best before date - even for
several months, depending on the type of food and
storage temperature.
This appliance is designed for use in restaurants,
canteens, and commercial enterprises such as
bakeries, supermarkets, etc.
This appliance is designed for commercial use.
This appliance is intended for indoor use.
Use the appliance only as described in the
manual.
Any other use may lead to damage to the appli-
ance, other user property, or personal injury.
No liability will be accepted for damage resulting
from improper use or non-compliance with this
manual.
NOTE: products put in the appliance must be al-
ready pre-cooled. Otherwise, moisture evaporating
while cooling food products can condensate inside
the cooling compartment.
Otherwise, it will contaminate with other food.
Do not store any medications in the appliance.
Operating the appliance for any other purpose
means misuse of the appliance.
5. TECHNICAL DATA
Common features of cooling and freezing cabinets:
Inner and outer housing are made of high-quality
stainless steel, except the outer rear cover which
is made of galvanized steel.
Forced cooling
Digital display and electronic thermostat.
EMBRACO compressor.
Self-closing lockable door, opens on the left side.
Comfortable curved door handle.
REFRIGERATORS
Model 232118 232125 233108 233122
Dimensions [mm] 730x845x2100 1314x845x2100 600x745x(H)1950 1200x745x(H)1950
Chamber Dimen-
sions [mm] 610x635x(H)1540 1194x635x(H)1540 500x540x(H)1380 1100x540x(H)1380
Numbers/ dimen-
sions of shelves
[mm]
3x GN 2/1 6x GN 2/1 3x 485x525 6x 525x530
Capacity. Brutto/
Netto [l] 670/412 1260/825 410/300 900/660
Power [W] 338 390 245 400
Voltage/ Frequency 230V ~50 Hz 230V ~50 Hz 230V ~50 Hz 230V ~50 Hz
Energy Use daily/
annum [kWh] 2,44/890 4,20/1530 2,83/1030 4,30/1570
6
EN
Model 232118 232125 233108 233122
Refrigerant/
Amount [kg] R134a/0,26 R134a /0,38 R134a/0,30 R134a / 0,33
GWP 1430 1430 1430 1430
Climate class 4 4 4 4
CO2 equivalent [kg] 0,3718 0,5434 0,429 0,5577
EEI D E F F
Temp. range [°C] 0/+8 1/+8 -2/+8 -2/+8
Weight [kg] 120 175 90 135
FREEZERS
Model 232132 232149 233115 233139
Dimensions [mm] 730x845x2100 1314x845x2100 600x745x(H)1950 1200x745x(H)1950
Chamber Dimen-
sions [mm] 610x635x(H)1540 1194x635x(H)1540 500x540x(H)1380 1100x540x(H)1380
Numbers/ dimen-
sions of shelves
[mm]
3x GN 2/1 6x GN 2/1 3x 485x525 6x 525x530
Capacity. Brutto/
Netto [l] 670/412 1260/825 440/300 900/660
Power [W] 520 830 450 750
Voltage/ Frequency 230V ~50 Hz 230V ~50 Hz 230V ~50 Hz 230V ~50 Hz
Energy Use daily/
annum [kWh] 8,03 / 2930 13,4 / 4890 7,24 / 2640 12,90 / 4710
Refrigerant/ Amount
[kg] R404A/0,38 R404A/0,55 R134a/0,39 R404A/0,55
GWP 3922 3922 1430 3922
Climate class 4 4 4 4
CO2 equivalent [kg] 1,49036 2,1571 0,5577 2,1571
EEI E F F G
Temp. range [°C] -22/-17 -22/-17 -22/-17 -22/-17
Weight [kg] 120 185 90 135
REFRIGERATORS AND FREEZERS
Model 233146 233153
Dimensions [mm] 1200x745x(H)1950 1800x745x(H)1950
Chamber Dimensions [mm] 525x540x(H)1380 REFRIGERATOR
525x540x(H)1380 FREEZER
1100x540x(H)1380 REFRIGERATOR
525x540x(H)1380 FREEZER
Numbers/ dimensions of
shelves [mm] 6x 510x525 6x 525x530 REFRIGERATOR
+ 3x 510x525 FREEZER
7
EN
Model 233146 233153
Capacity. Brutto/Netto [l] 470/315 REFRIGERATOR
470/315 FREEZER
890/660 REFRIGERATOR
420/315 FREEZER
Power [W] 700 750
Voltage/ Frequency 230V ~50 Hz 230V ~50 Hz
Energy Use daily/ annum [kWh] 10,06 / 3670 12,47 / 4550
Refrigerant/ Amount [kg] R134a/0,30 REFRIGERATOR
R134a/0,39 FREEZER
R134a/0,30 REFRIGERATOR
R134a/0,39 FREEZER
Climate class 4 4
CO2 equivalent [kg] 0,5577 0,5577
EEI F G
Temp. range [°C] -2/+8
-17/-22
-2/+8
-17/-22
Weight [kg] 155 180
Equipment contains fluorinated greenhouse GAS
Appliances are designed to work efficiently on the
ambient of +30 °C with 55% relative humidity.
Climate class indicates the maximum ambient
temperature at the place of appliance installation.
Compliance with the determined maximum ambi-
ent temperature ensures that internal temperature
inside the appliance is maintained and products
are safely stored. Remember that too high ambi-
ent temperature of the environment in which the
cooling or freezing cabinet is placed may influence
power consumption and have impact on storage
safety of the products placed inside.
The manufacturer and dealer is not liable for any
inaccuracies due to printing errors or transcription,
in this manual. In line with our policy of continu-
ous improvement products, we reserve the right to
make modification of the product, packaging and
specifications contained in the Documentation with-
out prior notice.
6. BEFORE THE FIRST USE
6.1. TRANSPORT
Special package box is required for the delivery of
the equipment. Keep the equipment level during
transportation and handling.
Please carefully check the package box after re-
ceiving the product to ensure that the equipment
is not damaged during transportation.
Check for the completeness of the equipment. In
case of incomplete delivery and damages. Please
contact supplier (See == > Warranty).
When removing the package box, carefully move
away the wood plate in case of scratch the equip-
ment.
In case that the equipment tilts during the trans-
portation and handling, the lubricant in the com-
pressor may flow into the cooling loop. Therefore,
in order to ensure the lubricant flows back to the
compressor, it is necessary to keep the equipment
level for 24 hours before plug in the equipment
and starts to work.
Do not throw away the package randomly. Please
dispose as per relevant local rules and regula-
tions.
Clean all components as described (See == >
Cleaning and Maintenance).
Place all the shelves inside the appliance.
NOTE: Due to manufacturing residues, the appli-
ance may emit a slight odor in the first few cycles.
This is normal and does not indicate any defect or
hazard. Make sure the appliance is well ventilated.
Turn on the lighting switch, check the light is nor-
mal.
The digital temperature controller is delivered
8
EN
with default parameters. Do not alter the param-
eters casually except for special need.
When running for the first time, it should run
without load for 2 hours to ensure the refriger-
ation system is working normally. Only when the
temperature within the appliance is reduced with-
in the indicated scope can the food be put into the
appliance.
Don’t put too much food in the appliance to pre-
vent instantaneous high load. The food shall not
block the air outlet and air inlet. Nor shall it be
close to side glass. Otherwise it will lead to con-
densation.
To keep the taste of the food, please have the
equipment running 24 hours a day.
During the frosting process, the temperature of
the appliance may rise slightly. When the frosting
end, it will return to normal.
ATTENTION: During transport, avoid skew the unit
from the vertical by an angle greater than 30 °, If
necessary, wait approximately 3-4 hours before
running, until the oil flows to the unit. Otherwise,
the condensing unit may be damaged.
6.2. PACKAGING
Upon receipt of the appliance, check the packaging
for any transport damage.
Carefully remove the external cardboard, loosen the
bolts fixing the appliance to the pallet (if present -
they secure the appliance from movement during
transport), put the appliance aside and remove the
protection film from the outer housing.
By recycling of packaging materials such as plas-
tics, steel, cardboard and wood, we significantly
contribute to saving raw materials and waste re-
duction.
Comply with local regulations regarding the meth-
od and place of disposal of the appliance packaging
materials.
6.3. LEVELLING
To ensure correct functioning it is important to level
the appliance. Correct levelling allows for reduction
of vibration generated by the unit in operation.
The appliance is supplied with adjustable feet.
Thoroughly check the levelling with the use of a
spirit level.
CAUTION!
To ensure proper functioning of the cooling/
freezing appliance, strictly follow the instructions
below:
Do not put the appliance in a place exposed to di-
rect sunlight and near appliances emitting radi-
ation, such as: heat lamps, stoves, radiators etc.
Avoid integrating or building over of the appliance.
Do not place any objects on the top of the appli-
ance housing where the refrigerating unit is lo-
cated.
Do not place the appliance in a room with relative-
ly high humidity (water can liquify on the housing).
Do not place the appliance in narrow recesses (if
there is no air circulation, the appliance will not
function properly).
Do not cover ventilation openings located on the
housing.
Do not place the appliances back to back (they will
not operate properly).
Ensure that the room where the appliance is placed
is properly ventilated, also outside of working
hours; it is crucial for proper operation of the re-
frigerating unit.
9
EN
6.4. MINIMUM DISTANCE FROM WALLS
In order to ensure proper operation of the appli-
ance, during the installation remember to ensure
minimum distance from walls in accordance with
the drawings below. Remember to ensure the ap-
propriate amount of space in front of the appliance
as well - it is necessary for easy opening of the cool-
ing/freezing chamber doors.
6.5. CONNECTION TO POWER SUPPLY
The connection to the power source must be made
by trained and qualified service technicians. The
power cable is supplied with the cooling/freezing
counter. A thermomagnetic circuit breaker (field
supply) must be installed between the socket and
the power cable of the appliance.
Prior to making the connection, make sure:
The supply voltage corresponds to the appliance
voltage of 230 V / 50 Hz / 1 ph. Proper operation of
the appliance requires that the voltage should be
within ± 6% of the rated voltage.
The electrical system used to power the appliance
must be suitable for rated parameters of the ap-
pliance to be installed.
The electronic system connected to the counter
complies with applicable requirements. Electrical
connections and installation of the thermomag-
netic circuit-breaker have been performed by a
qualified person.
Connection stages:
Install the thermomagnetic circuit breaker suita-
ble for rated output power of the appliance to be
installed.
Connect the counter to the output on the thermo-
magnetic circuit breaker.
Make sure the counter is operational (signalled by
an indicator lamp).
7. HOW TO USE
7.1. PLACING TRAYS AND CONTAINERS IN THE REFRIGERANT’S/FREEZER’S CHAMBER
Never stack food items on top of each other. Divide them evenly on the tray or GN container.
FRONT SIDE
10
EN
Keep vertical space between trays and/or GN containers
In order to ensure optimum circulation of hot air in the refrigerants/freezer’s chamber, a minimum verti-
cal distance of 40 mm between the trays or GN containers is required.
Positioning of trays and/or GN containers in the refrigerant’s/freezer’s chamber
To ensure optimum cold air circulation:
Don’t position the tray or GN container against the fan
Position them evenly and in the middle in the oven chamber
7.2. AUTOMATIC DEFROSTING
The appliance is equipped with an automatic de-
frosting system with default parameters, whereas
the number, duration and time intervals between
subsequent defrosting cycles can be set in the con-
trol panel.
This process should be conducted by qualified staff;
in individual cases the appliance may require man-
ual defrosting, which can be set in the control panel
or you can switch the appliance off and wait until
the ice melts (the time required for this process
depends on the room conditions and the amount of
ice).
In case of appliances designed for frozen or packed
food, it is recommended to fully clean and defrost
the appliance once a month.
It is recommended to clean the external housing of
the appliance and internal part of the door, espe-
cially near the gasket.
22
DE
Umgebungstemperatur, in welcher der Kühlschrank
oder der Gefrierschrank arbeiten, die Zunahme des
Energieverbrauchs sowie die Sicherheit der Pro-
duktlagerung in den Geräten beeinflussen können.
Der Hersteller und Verkäufer tragen keine Verant-
wortung für irgendwelche Unstimmigkeiten, die sich
aus den in der vorliegenden Anleitung auftretenden
Druckfehlern und Transkriptionen ergeben. Gemäß
unserer Politik in Bezug auf die Weiterentwicklung
der Produkte behalten wir uns das Recht vor, die
Änderungen an dem Produkt, der Verpackung und
den in der Dokumentation enthaltenen Spezifika-
tionen ohne Vorankündigung vorzunehmen.
6. VOR ERSTEM GEBRAUCH
6.1. TRANSPORT
Für den Transport des Gerätes ist eine Spezial-
verpackung erforderlich. Während des Trans-
ports und des Gebrauchs muss das Gerät in hori-
zontaler Position gehalten werden.
Es ist zu prüfen, ob während des Transports die
Verpackung nicht beschädigt wurde.
Die Vollständigkeit der Teile prüfen. Bei nicht
kompletter Anlieferung oder Beschädigung der
Verpackung muss man sich mit dem Lieferanten
in Verbindung setzen (Siehe Punkt GARANTIE).
Beim Entfernen der Verpackung muss man vor-
sichtig die Holzplatte wegschieben, da das Risiko
des Zerkratzens des Gerätes besteht.
In dem Fall, wenn sich während des Transports
die Ausrüstung zu sehr neigt, besteht das Risiko,
dass das Schmiermittel aus dem Verdichter in
den Umlauf des Kühlmittels gelangt. In solch ei-
nem Fall muss man vor der Inbetriebnahme das
Gerät über 24 Stunden horizontal halten, denn
dann fließt das Schmiermittel erneut in den Ver-
dichter ein.
Die Verpackung ist entsprechend den lokal gel-
tenden Vorschriften zu entsorgen.
Alle Elemente sind nach der Anleitung zu reinigen
(Siehe Punkt REINIGUNG UND WARTUNG)
Alle Fächer sind wieder im Innern des Gerätes
anzubringen.
HINWEIS: In Bezug auf die Produktionsrückstände
kann das Gerät einen unangenehmen Geruch am
Anfang des Funktionsbetriebs ausscheiden. Das ist
aber eine ganz normale Erscheinung und verweist
auf keine Mängel oder Gefahrenfunktion hin. Über-
zeugen Sie sich nur, ob das Gerät gut belüftet wird. .
Schalten Sie die Beleuchtung des Gerätes ein und
prüfen Sie, ob diese richtig funktioniert.
Das Gerät besitzt ein digitales Steuerpanel für die
Temperatur mit vorgestellten Standardparam-
etern. Ändern Sie keine Parameter des Gerätes
zufällig, mit Ausnahme besonderer Bedarfsfälle.
Vor dem ersten Gebrauch nimmt man das Gerät
für ca. 2 Stunden ohne Einlage in Betrieb, um die
Funktion des Kühlsystems zu überprüfen. Erst
wenn die reale Temperatur innerhalb der Vitrine
die gewünschte Temperatur erreicht, kann man
die Produkte im Gerät einlegen.
Legen Sie keine zu großen Mengen in die Vitrine,
um einer momentanen Überlastung vorzubeu-
gen. Die Produkte dürfen auch nicht die Zufuhr
und den Luftaustritt verstellen. Sie dürfen sich
auch nicht in der Nähe der Seitenscheiben befin-
den. Andernfalls kann es zu einer Verflüssigung
kommen.
Um den Geschmack der Produkte zu bewahren,
rüstet man das Lokal mit einer ganztägig arbei-
tenden Kühlanlage aus.
Während des Gefrierprozesses kann die Tem-
peratur der Vitrine etwas anwachsen. Nach dem
der Prozess beendet ist, kehrt sie wieder in den
Normbereich zurück.
ACHTUNG: Beim Transport darf man nicht das
Gerät von der Senkrechten um einen Winkel von
mehr als 30° gekippt werden, da sonst der Ver-
dampfer beschädigt werden kann.
6.2. VERPACKUNG
Während der Abnahme ist die Verpackung zu
überprüfen, ob sie nicht während des Transportes
beschädigt wurde. Dabei ist der äußere Karton
vorsichtig abzunehmen und die Befestigungss-
chrauben für das Gerät an der Palette zu lösen –
wenn sie vorhanden sind (Transportsicherung vor
dem Verschieben), ist das Gerät abzustellen und
vom äußeren Gehäuse die Schutzfolie abzunehmen.
22

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Hendi 233122 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Hendi 233122 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Pools als bijlage per email.

De handleiding is 2,24 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info