742508
5
Verklein
Vergroot
Pagina terug
1/144
Pagina verder
5
EN
Preparation for installation
After unpacking of the device, a power supply, a
2.5” wrench for the head flange, 3/4” seals and 3/4”
connectors shall be taken out of the brine tank.
Only the special recesses in the housing shall be
used to lift and move the device around. The device
shall not be lifted by its electric cables or water
hoses due to damage that might occur.
Before installing, ensure that water mains pres-
sure is above 1.5 bar and below 6.0 bar. Shall the
pressure be higher, a reducing valve shall be in-
stalled upstream the device.
A location as close as possible to the water inlet of
a building shall be chosen (a water meter in case
of mains water supply or a hydrophore in case of
own water source/inlet) and in the vicinity of drain-
age. Moreover, permanent electric power supply is
necessary, therefore a socket must be near. The
surface of installation must be stable and must
withstand the weight of the device filled with water.
Ambient temperature in the selected installation
area shall never drop below 5°C, otherwise the
device may be permanently damaged. The devices
shall not be installed in rooms with excessive air
humidity. What is more, the selected area shall be
large enough to guarantee free access to the de-
vice, as it requires periodical refilling of salt.
Installation
The connectors of the control head are marked as
IN (inlet) and OUT (outlet), looking from the front of
the control head: IN (inlet) on the right, OUT (out-
let) on the left. The seals and connectors provided
shall be placed/fixed onto the connectors of the
control head. The water softener shall be connect-
ed to the system with flexible hoses (not provided).
A mechanical filter shall be installed upstream the
softener, of at least 50 microns, in order to protect
the device against impurities.
A by-pass can be executed by means of regular
valves, as indicated in Fig. A. A turbine must be in-
stalled in a nipple fixed onto the “OUT” connector
of the control head. Before installation, make sure
that the turbine rotates freely (e.g., by blowing air
into the water outlet). The device shall be installed
by means of materials intended for water installa-
tions. In case of any problems or doubts, contact
a qualified installation company or an authorized
service company.
Diagram of the device
Control head
Cover
Flange
Upper basket
Overflow elbow
Distrubution pipe
Resin
Lower basket
Brine valve pit
Brine valve
Cabinet
Salt
Container
Fig. A
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Hendi 230442 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Hendi 230442 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Pools als bijlage per email.

De handleiding is 1,15 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info