741152
12
Verklein
Vergroot
Pagina terug
1/132
Pagina verder
EN
12
VOLTAGE LACKING
In case of electric feeding breaking or if the machine
is disconnected from the electric net, this last one
will be able to be restarted only following the star-
ting function, after the electric feeding back or the
reconnection to the electric net.
CONTROLS AND VERIFICATIONS BEFORE STARTING
VERIFICATION / CONTROL MODALITIES AND CHECKS
Check that:
There aren’t inside the pot
extraneous objects
Sight control of the indicated parts, to check of objects or extraneous bodies
lacking as for example different tools, clothes, etc … and that there isn’t however
the food product
Check the cleaning:
Of the machine external sides
of the tool along its surface
of the tool external sides
All indicated parts surfaces, before the machine use must be checked visually to
verify their cleaning. In case of molds presence or other type of dirtiness, provide
with the cleaning procedure in accordance with the chapter 5 indications.
Check the integrity:
of the fixed protections
of the machine body
All fixed protections, etc.. must perform the function for which have been
foreseen. Indicated parts sight check to verify their integrity in their surface
external part. The parts must be however changed at the first erosion signals or
breaking (cfr. Authorized Assistance Center).
Check the functionality:
of the control system
parts / control about the
safety;
of the control devices.
All devices must perform the function for which have been foreseen. Control
directly the devices so that these ones determine the waiting function.
The actuators and all parts must be however changed to the first erosion signals
or breaking (cfr. Authorized Assistance Center).
Check the absence:
of strange noises after
the starting
During the functionality checking of the control devices, if there are strange
noises, due for example to a seizing or mechanical breaks, stop immediately the
machine and activate the maintenance service.
For any intervention type or for the parts change that
are damaged, activate the maintenance service.
The possible change must happen with manufactur-
er original products or at least of quality, safety and
equivalent characteristics. For analysis contact the
Authorized Assistance Center.
PUT IN FUNCTION
The machine operator can put in function the machi-
ne following in order the under reported indications:
Positive controls result for the preparation pre-
liminary operations,
Positive controls result for the electric feeding,
Plug connection in opportune current socket,
Positive controls result for the assembly,
Positive controls result / checks before the starting,
Positive controls result finalized to check the re-
spect of all safety conditions,
Introduce manually the feed product inside the pot,
With the use of both the hands take the machine
in the foreseen zones:
Place it with the tool inside the pot,
Start, maintain and handle it up to the end of the
feed product work,
When the food product has reached the desired
solidity, stop the machine and placed on a support
adequate bench,
Discharge manually the pot feed product, taking it
with both the hands and pouring out the feed
product where necessary.
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Hendi 224335 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Hendi 224335 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Pools als bijlage per email.

De handleiding is 1,18 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info