741889
20
Verklein
Vergroot
Pagina terug
1/48
Pagina verder
20
EN
ON/OFF
When power is supplied to the oven the control panel lights up and the operating display indicates tempera-
ture in cooking chamber.The oven now is ready for operating.
START/STOP COOKING PROGRAM
This button starts/stops a previously set program or cooking cycle.
TEMPERATURE SELECTOR
When the oven is on “ON” the temperature display shows the temperature in the cooking chamber.To set the
desired cooking temperature press the temperature selector and press (+) or (-) buttons for INCREASE or
DECREASE. The temperature display will show the set value. Press the temperature button for confirmation
or wait 5 seconds and it will automatically be confirmed. Values go from 30°C to 260°C.
During cooking the CHAMBER display shows actual internal chamber temperature and to see the set tem-
perature you must press “temperature button”. Heating element led is on red when the heat is on and green
when it is off.
TIMER
Press Timer button, to set the time value by acting on (+) or (-) for INCREASE or DECREASE. The time which
appears on the display must be confirmed pressing the timer button or wait 5 seconds for automatic confir-
mation.
The programmable times range is 999 minutes.
Acting on the timer button if you go under value of “1” on display you will see “----“: means “infinite time” the
oven will continue to work with the set parameters until START/STOP button is pressed. The time display will
start count-up so you can see from how long the oven is operating.
In case you set minutes on the time display will start countdown during cooking.
STEAM
Enables humidifying in manual cooking or to program the various humidity settings during process.
- Humidifying in manual cooking: during cooking, the STEAM button enables the release of steam into the
cooking chamber for as long as it is pressed. The STEAM led will be on. If the motor turns the other way (only
for models with inverter system), humidifying will stop briefly.
- To program automatic humidifying during cooking: after pressing the STEAM button, it is possible to in-
crease or decrease the humidity by pressing + / -. It ranges from: OFF – 20% - 40% - 60% - 80% - 100%.
During programming the values flash on the display and pressing STEAM again will memorize them or wait 5
seconds for automatic confirmation.
- During cooking, the STEAM led goes on when steam is being released into the cooking chamber and it stop
briefly when the motor turns the other way (only models with inverter system).
- During cooking, keeping the STEAM button pressed enables manual humidifying at any time for as long as
it is pressed.
The set of humidification is allowed only before running a cycle. To change the set of humidification: press
STEAM button and on the Display 1 show „hum”, the Display 2 (DISP2) show flashing the set-humidifies, with
+ / - button you change its value.
20

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Hendi 223376 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Hendi 223376 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Pools als bijlage per email.

De handleiding is 2,15 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info