801902
27
Verklein
Vergroot
Pagina terug
1/69
Pagina verder
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
Page 13 of 13 EZ-CHEM Rev. B
Troubleshooting guide
As most malfunctions are related to a poor water balance, we advise you to check it before handling the product (see
chemical water balance).
Alarm text Possible causes Recommendation Action
“Flow” ashing Insufcient ow or no ow
Check the operation of the ow switch; if the contact is
closed, "FLOW" remains steady, otherwise it ashes.
The fault automatically
disappears once the
problem is resolved
Check that the lter pump is working correctly
Check the operating periods on the programming clock
Ensure that all the valves are open
Ensure that the water ows freely in the pipes
OFA Alr (pH)
Setting time too low Increase the pH OFA alarm time (20 minutes to
240 minutes)
Press CAL Enter to
remove the fault
Or set the pH OFA alarm
to OFF.
Acid container empty Replace the acid container
Rigid injection pipe blocked or pinched Inspect the acid injection pipe, replace if necessary
Peristaltic pump problem
Check pump operation, press the (+) button to force it to
operate, replace the pump if faulty
Inspect the membrane, replace if necessary
Difculty reading the pH or unstable pH Check the water balance and recalibrate the pH probe
OFA STOP (pH) pH level not reached after 3 cycle times See recommendation for pH OFA Alarm Press CAL Enter to
remove the fault
OFA Alr (Rx)
Setting time too low Increase the Redox OFA alarm time (20 minutes to
240 minutes) Press CAL Enter to
remove the fault
Or set the Rx OFA alarm
to OFF.
Chlorine container empty Replace the liquid chlorine container
Rigid injection pipe blocked or pinched Inspect the chlorine injection pipe, replace if necessary
Peristaltic pump problem
Check pump operation, press the (-) button to force it to
operate, replace the pump if faulty
Inspect the membrane, replace if necessary
Difculty to read Redox Check the water balance and recalibrate the ORP probe
OFA STOP (Rx) Redox level not reached after 3 cycle
times See Rx OFA Alr recommendation Press CAL Enter to
remove the fault
Parameter error System error Restore the default settings N/A
Electronic problem, replace the device
Error 7 pH
pH probe calibration problem Repeat the calibration
The fault automatically
disappears once the
problem is resolved
pH probe faulty Check the pH probe connection with the BNC connector
on the housing, inspect the probe and the cable
pH buffer solution out of date Obtain a new solution
Error 4 pH
pH probe calibration problem Repeat the calibration
pH probe faulty Check the pH probe connection with the BNC connector
on the housing, inspect the probe and the cable
pH buffer solution out of date Obtain a new solution
Error 465 mV
Rx probe calibration problem Repeat the calibration
Rx probe faulty
Check the connection of the Rx probe with the BNC
connector on the housing, inspect the probe and the
cable
Rx buffer solution out of date Obtain a new solution
27

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Hayward EZ-Chem bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Hayward EZ-Chem in de taal/talen: Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 59.76 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info