ZONE II REMOTE CONTROL FUNCTIONS
å
Power Off Button: When used in the room
where the AVR 430 is located, press this button to
place the unit in Standby. When it is used in a remote
room with a sensor that is connected to the
Multiroom IR Input f jack, this button turns the
Multiroom system on and off.
∫
AVR Selector Button: Press this button to turn
on the AVR 430. The input in use when the unit was
last on will be selected.
ç
AM/FM Tuner Selector: Press this button to
select the Tuner as the input to the Multiroom system.
Press it again to change between the AM and FM
bands.
∂
Input Selectors: When the AVR 430 is off,
press one of these buttons to select a specific input
and turn the unit on. When the unit is already in use,
pressing one of these buttons will change the input.
≠
Tuning Up/Down – Fast Play Buttons: When
the Zone II remote is used in the same room as the
AVR 430, these buttons may be used to change the
frequency of the tuner. These buttons may also control
the Fast Play or Fast Reverse functions of compatible
Harman Kardon CD, DVD or cassette decks in the
same room, or from a remote room when an IR link
is connected to the AVR 430.
ƒ
Record/Pause Button: Press this button to
activate the Record or Pause function on compatible
Harman Kardon CD, DVD or cassette deck products.
©
Preset Up/Down – Track Skip Buttons: When
the AVR 430’s tuner is selected as the input source,
these buttons will move up or down through the list of
stations that have been stored in the preset memory.
When a CD or DVD changer or player is selected,
these buttons activate the Forward or Reverse Track
or Chapter Skip functions.
˙
Disc Skip Buttons: Press these buttons to
change discs on compatible Harman Kardon CD or
DVD changer or players.
Volume Up/Down Buttons: When the Zone II
remote is used in the room where the AVR 430 is
located, press this button to raise or lower the volume
in that room. When it is used in a remote room with a
sensor that is connected to the
Multiroom IR Input
f jack, this button will raise or lower the volume in
the remote room.
∆
Play Forward/Reverse/Stop Buttons: Press
these buttons to control compatible Harman Kardon
CD, DVD or cassette players.
˚
Mute Button: When the Zone II remote is used
in the room where the AVR 430 is located, press this
button to temporarily silence the unit. When it is used
in a remote room with a sensor that is connected
to the
Multiroom IR Input f jack, this button will
temporarily silence the feed to the remote room
only. Press the button again to return to the previous
volume level.
NOTES:
•
The Zone II remote may be used in either the same room where the AVR 430 is located, or it may be used in a
separate room with an optional infrared sensor that is connected to the AVR 430’s
Multiroom IR Input f jack.
When it is used in the same room as the AVR 430, it will control the functions of the AVR 430 or any compatible
Harman Kardon products in that room. When it is used in a separate room via a sensor connected to the
Multiroom IR Input f jack, the buttons for Power, Input Source, Volume and Mute will control the source
and volume for the second zone, as connected to the
Multiroom Audio Outputs j jacks. (See page 38 for
complete information on using the Multiroom system.)
• To make it easier to follow the instructions that refer to the controls and connectors in this illustration, a larger
copy may be downloaded from the Product Support section for this product at www.harmankardon.com.
ZONE II REMOTE CONTROL FUNCTIONS 15
