534569
10
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
10
SB 30
Using Your Soundbar Speaker System
Wireless Code Switches
In the unlikely event that you encounter interference when operating the system, or if you
have more than one SB 30 system in operation, you may change the channel at which
the wireless system operates. There are four-position Wireless Code switches on both
the soundbar and subwoofer. To change the wireless channel, set each of the switches to
one of the other three positions. IMPORTANT: The switches on the soundbar and the
subwoofer must be set to the same position for the wireless system to work.
L
Input
Input
1 2 3 4
L
Input
Input
1 2 3 4
This area is designed to become
quite warm during normal operation
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISK OF ELECTRIC SHOCK
DO NOT OPEN
SB 30 CNTR Soundbar
SB 30 Subwoofer
Set Both Switches
to the Same Number
Wireless Code
Switch
Wireless Code
Switch
Turning the Soundbar On and Off
Manually: To turn the soundbar on manually, momentarily press the Power button on the
soundbar or on the remote control. Pressing the Power button while the soundbar is on
will put it into the Standby mode.
Power
Button
Power
Button
NOTE: If you put the soundbar into the Standby mode manually, you can turn it back on
only by manually pressing the Power button again.
Auto turn-on: The soundbar has a signal detector that will automatically turn the unit on
when it senses an audio signal at any of its inputs. To minimize power consumption, the
signal detector is not activated unless the soundbar first senses any kind of IR remote
signal. Once the soundbar’s signal detector has been activated, the unit will automatically
turn from Standby to on as soon as it detects an input signal at any of its source input
connections.
Auto turn-off: The soundbar will automatically enter the Standby mode if no audio signal
is detected at any of its source input connections for approximately 15 minutes.
Turning the Subwoofer On and Off
The subwoofer will automatically turn on when it receives an audio signal from the
soundbar, and it will return to the Standby mode when it has received no audio signal for
15 minutes. The subwoofer’s Power LED will turn blue when the subwoofer is on and will
turn amber when the subwoofer is in Standby.
Subwoofer Volume Control
Use the subwoofer’s Volume control to balance its volume with that of the soundbar. Once
you find the proper balance between the subwoofer and the soundbar, the soundbar’s
Volume Up/Down buttons will control the volume of the entire system, and you should not
have to readjust the subwoofer’s Volume control.
Volume
Control
This area is designed to become
quite warm during normal operation
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Notes on setting subwoofer volume
• Sometimes the ideal subwoofer volume setting for music is too loud for films,
while the ideal setting for films is too quiet for music. When setting the subwoofer’s
Volume control, listen to both music and films with strong bass content and find a
“middle ground” volume level that works for both.
• If your subwoofer always seems too loud or too quiet, you may want to place it in
a different location. Placing the subwoofer in a corner will always tend to increase
its bass output, while placing it away from any walls or corners will always tend to
lessen its bass output.
10

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Harman-Kardon-SB-30

Zoeken resetten

  • Wij hebben thuis al een tijdje een Soundbar SB30 van Harman Kardon aangesloten staan op de TV maar doet het eigenlijk niet. Deze week nog eens getest via een ander apparaat dan de TV maar ook dan doet deze het niet. Zowel een poging gedaan met de optische kabel als met de analoge kabels. Totaal geen geluid. Mute uit en volume omhoog maar geen respons. Wat zou het kunnen zijn? Ik zocht een manier om een reset te kunnen geven maar deze niet gevonden in de beschrijvingen en op het apparaat. Wie heeft de oplossing? Gesteld op 18-12-2020 om 14:37

    Reageer op deze vraag Misbruik melden
  • De source zowel op de afstandsbediening als op de soundbar geselecteerd op "Optisch" en "Analoog", maar geen geluid. Nog even mijn I-phone aangesloten met een kabeltje op de analoge ingang maar geen respons. Hoe zou ik de fabrieksinstellingen kunnen herstellen? Geantwoord op 18-12-2020 om 15:49

    Waardeer dit antwoord Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Harman Kardon SB 30 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Harman Kardon SB 30 in de taal/talen: Engels als bijlage per email.

De handleiding is 4,92 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Harman Kardon SB 30

Harman Kardon SB 30 Gebruiksaanwijzing - Nederlands - 16 pagina's

Harman Kardon SB 30 Snelstart handleiding - Nederlands - 2 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info