456600
6
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
6
XM Radio Button: Press this button to select XM Satellite Radio as
the source. You will need to have purchased and activated an XM
®
antenna
module, and you will also need to subscribe to the XM Radio service.
Visit www.xmradio.com for more information.
Learn Button: The RCP 7 remote is capable of “learning” individual
IR codes from the original remote that came with your TV or a device
that is connected to any of the source inputs. See the Programming
Sources section for instructions on learning remote codes.
Test Tone: Press this button to activate the test tone for manual
output-level calibration.
TV/Video/Video Off: This button has no effect on the receiver,
but is used to switch video inputs on some video source components.
When the DVD player has been selected (by pressing the DVD Input
Selector), pressing this button disables the DVD 48’s video output to
avoid “burning in” menus or still images on sensitive video displays. This
feature is particularly useful when listening to CDs or other audio-only
presentations.
Sleep/Audio Select: Press this button to activate the sleep timer,
which shuts off the receiver after a programmed period of up to
90 minutes.
When the DVD player has been selected, this button may be used to
select another audio format or language, if one is available on the disc.
Volume Controls: Press these buttons to raise or lower the volume,
which will be shown in decibels (dB) in the Message Display.
DSP Surround/Title: Press this button to select a DSP Surround
mode (Hall 1, Hall 2, Theater).
When the DVD player has been selected, this button serves the Title
function. When a DVD is playing, press this button to go back to the
main title menu for the disc. If you are playing a DVD-Audio disc that
contains other audio formats, such as linear PCM or Dolby
®
Digital 5.1
audio, pressing this button may enable you to switch playback from one
audio format to another.
On-Screen Display (OSD)/Group: Press this button to activate
the AVR 347’s on-screen menu system.
When the DVD player has been selected, this button serves the Group
function. Press it to select another group on a DVD-Audio disc for play-
back. See the DVD 48’s manual for a more detailed explanation.
Multiroom/HDMI: Press this button to control the multiroom system.
Three settings are available: MULTI ON/OFF, which is used to turn the
multiroom system on or off; MULTI LEVEL, which adjusts the volume of
the remote zone; and MULTI INPUT, which is used to select the source
input for the remote zone. See Multiroom Operation in the Advanced
Functions section of the AVR 347 manual for more information on using
the multiroom system.
When the DVD player has been selected, this button is used to turn
the DVD 48’s HDMI Output on or off. It has the opposite effect on the
DVD 48’s Component Video Outputs. See the DVD 48’s manual for
more information.
Channel Level/Disc Menu: Press this button to set the output
levels for each channel so that all speakers sound equally loud at the
listening position. This may be done while playing an audio selection, such
as a favorite CD, after you have calibrated the levels using the EzSet/EQ
process.
When the DVD player has been selected, this button serves the Disc Menu
function. While a disc is playing, press this button to view the disc’s menu.
This function is different from the DVD Setup function.
Speaker Setup/DVD Setup: Press this button to configure
speaker sizes; that is, the frequency-range capability of each speaker.
This may be done automatically by running the EzSet/EQ procedure,
or using the on-screen menu system, as described in the Advanced
Functions section of the AVR 347 owners guide.
When the DVD player has been selected, this button serves the DVD
Setup function. Press it to use the DVD 48’s on-screen menu system
to adjust the player’s configuration settings. This function is different
from the Disc Menu function.
Navigation and Set/Enter Buttons: These buttons are used
together to make selections within the AVR 347’s or DVD 48’s
on-screen menu system, or when accessing the AVR functions of
the four buttons surrounding this area of the remote – Channel Level,
Speaker Setup, Digital Input or Delay.
Digital Input Select/Drawer Open/Close: Press this button to
select the specific digital audio input (or analog audio input) you used
for the current source.
When the DVD player has been selected, this button is used to open
or close the disc drawer.
Delay/DVD Status: Press this button to set delay times that
compensate for placing the speakers at different distances from the
listening position, or to resolve a “lip sync” issue that may be caused by
digital video processing. This may be done automatically by running the
EzSet/EQ procedure, or using the on-screen menu system, as described
in the Advanced Functions section of the AVR 347 owner’s guide.
When the DVD player has been selected, this button serves the Status
function. Press it while a disc is playing to view the on-screen Status
Display, which provides a snapshot of the settings for the current disc.
See the DVD 48 owner’s manual for more information.
Numeric Keys: Use these buttons to enter radio station frequencies
or to select station presets. When the AM or FM band is in use, press
the Direct Button before entering the station frequency.
When listening to XM Radio, you may enter channel numbers without
first pressing the Direct Button; however, to access the preset stations,
you will need to use the Preset Stations Selectors. To access another
bank of XM presets, press the Set Button repeatedly until PRESET
SEARCH appears, then use the
/
¤
Buttons to select the letter of
the desired bank.
REMOTE CONTROL FUNCTIONS
RCP7 OM.qxd 3/23/07 4:15 PM Page 6
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Harman Kardon RCP 7 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Harman Kardon RCP 7 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,2 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info