502808
19
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
19
INSTALLATION
Video 2 Source
The Video 2 source is used only for playback. Since the remote is
preprogrammed to operate a Harman Kardon DVD player when the
Video 2 source is selected, we recommend that you connect a DVD
player to the Video 2 Inputs.
You may have observed that the HK 3385 is not equipped with digital
audio inputs or surround sound decoding. If you prefer the complete
home theater experience, you may wish to consider purchasing a full-
featured Harman Kardon AVR Series audio/video receiver. However, we
hope you will find that using a DVD player with the HK 3385 in smaller
settings, such as a bedroom or den, surpasses the audio performance
of most televisions, including those with onboard stereo speakers.
Connect the left and right analog audio outputs of the DVD player to
the Video 2 Audio Inputs on the HK 3385. Then connect the composite
video output of the DVD player, usually colored yellow, to the Video 2
Video Input. See Figure 16.
Figure 16 – Video 2 Audio and Video Inputs
NOTE: If you receive your television programming using your TV
with an antenna or direct cable connection, then you will need
to connect the analog audio (if available on your TV) outputs
to the Video 2 Analog Audio Inputs. Do not connect any video
output on the television set to any Video Input on the receiver.
See Step Five for information on connecting the receiver’s Video
Monitor Outputs to the television.
Video 3 Source
The Video 3 source is used only for playback.The Video 3 source has
two sets of input jacks, one located on the HK 3385’s rear panel and
one set on the front panel. If you wish to connect a video device more
or less permanently, you may prefer to connect it to the rear-panel
inputs for a neater appearance. You may prefer to reserve the front-
panel inputs for devices connected on a temporary basis, such as a
video-capable iPod (not included), a camcorder, a game console, or
another type of media player with analog audio and/or video outputs.
You may connect devices to both the front- and rear-panel inputs simul-
taneously. To select either device, press the Video 3 Source Selector on
the HK 3385’s front panel or remote repeatedly. When the dot to the
left of the Video 3 Input Indicator (on the front panel of the HK 3385)
is lit steadily, the rear-panel inputs are active. When the dot flashes, the
front-panel inputs are active.
Connect the left and right analog audio outputs of your device to the
corresponding Video 3 Inputs on either the front or rear panel, and if
available, connect the composite video output of the device to the
Video 3 Video Input on the same panel. See Figure 17.
Figure 17 – Front- and Rear-Panel Video 3 A/V Inputs
To connect an iPod to the Video 3 Inputs, insert the 1/8" mini plug on
the A/V cable included with the HK 3385 into the iPod’s headphone
jack. Insert the left and right analog audio plugs on the other end of
the A/V cable into the Video 3 Audio Inputs on the front of the receiver.
If the iPod is capable of playing videos or displaying images, insert the
composite video plug of the A/V cable into the Video 3 Video Input.
Since the remote is preprogrammed to operate a Harman Kardon DVD
player when the Video 3 source has been selected, use the original
remote to control other components, or operate an iPod using its own
controls.
Step Five – Connect the Video Display
Only video connections should be made between the receiver and
your video display (TV), unless your TV is the source for your television
programming (see note above).
To view video or images played by your source devices, connect the
Video Monitor Output of the HK 3385 to a Composite Video Input on
your television or video display. See Figure 18. Consult the manual for
your TV so that you understand how to select and display the correct
Video Input.
Figure 18 – Video Monitor Output
Step Six – Connect the Remote IR Input and
Output (Optional)
The HK 3385 is equipped with a Remote IR Input and a Remote IR
Output to facilitate use of your system with a remote control in a variety
of situations.
When the HK 3385 is placed in such a way that aiming the remote at
the front-panel IR sensor is difficult, such as inside a cabinet or facing
away from the listener, you may connect an external IR receiver, such
as the optional Harman Kardon HE 1000, to the Remote IR Input jack.
If any of your source devices are equipped with a compatible Remote IR
Input, you may use a 1/8" mini-plug interconnect cable (not included) to
HK 3385 OM 4/13/07 12:03 PM Page 19
19

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Harman Kardon HK 3385 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Harman Kardon HK 3385 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,18 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info