A Bitstream Indicators
B Lower Display Line
C Multiroom Indicator
D OSD Indicator
E Speaker/Channel Input Indicators
F Upper Display Line
A Bitstream Indicators: When a digital input is playing,
one of these indicators will light to display the type of data
signal in use.
B Lower Display Line: Depending on the receiver’s
status, a variety of messages will appear here. In normal
operation, the current surround mode name will appear
on this line.
C Multiroom Indicator: This indicator lights when
the multiroom system is active. Note that it will remain
lit when the multiroom system is in use even when the
main room system is in the Standby mode and all
other indicators are dark. (See page 31 for more
information on the Multiroom system.)
D OSD Indicator: When the OSD system is in use,
this indicator lights to remind you that the other indica-
tors in this display do not function when the On-Screen
Display is being used.
E Speaker/Channel Input Indicators: These indica-
tors are multipurpose, indicating either the speaker type
selected for each channel or the number of channels
available from the input source. The left, center, right,
surround and surround back speaker indicators are
composed of overlapping ovals, while the subwoofer is
represented by a single box labeled “LFE”. The center
oval lights when a “Small” speaker is selected, and the
outer oval lights when “Large” speakers are selected.
When none of the indicators are lit for a specific chan-
nel, no speaker has been selected at that position. (See
page 19 for more information on configuring speakers.)
The indicators are positioned to correspond to the input
channels. For standard analog inputs, only the top left
and right indicators will light, indicating a stereo input.
When a digital source is playing, the indicators will light
to display the channels being received at the digital
input. When the indicators flash, the digital input has
been interrupted.
F Upper Display Line: Depending on the receiver’s
status, a variety of messages will appear here. In normal
operation, the current input source information will
appear on this line, including the input name and an
indication as to analog audio or one of the optical or
coax digital audio inputs.
NOTE: To make it easier to follow the installation instructions that refer to this illustration, a larger copy may be
downloaded from the Product Support section at www.harmankardon.com.
