502658
21
Verklein
Vergroot
Pagina terug
1/26
Pagina verder
CD RECORDING 21
CD Recording
Making recordings on the CDR 30 is simple and
easy once you become accustomed to the basics
of CD Recording. Before making your first record-
ing, please take a moment to review the CDR
Basics on page 14. In particular, you will need to
become familiar with the types of discs that may
or may not be used in the CDR 30. In addition,
some terms used in the following pages may be
new to you. The following definitions and infor-
mation will help you to make CD recordings
using the CDR 30’s many features:
In the following the terms "analog dubbing"
or "analog recording" will say only that the
signal fed to the CDR30 for recording is ana-
log. Of course, in the CDR30 all analog record
signals will be converted to digital (A/D con-
verter) and recorded on discs in digital form
only.
The CDR 30 accepts analog inputs and digital
coax or optical inputs. Before making a record-
ing, be certain that you have selected the cor-
rect input, using the Input Select Button
ı
.
After a disc is recorded, it must be finalized.
This process adds the final table of contents
data to the disc and makes it playable on other
machines. Until a disc is properly finalized, it
may not be played on standard CD players.
The CDR 30 may record on either CD-R or
CD-RW discs, but they must be of the type
specifically designed for use in consumer-audio
CD recorders.These discs may be recognized by
looking for the words “Digital Audio” in the
compact disc logo on the blank disc or its pack-
aging. Discs with the logo reading only
“Compact Disc/Recordable” are designed for
computer data recording, and they may not be
recorded using the CDR 30.
CD-R discs may not be erased or have material
added to them once they have been finalized.
At least four (4) seconds of blank recording
time must remain on an unfinalized disc for
recording to take place.
The maximum number of tracks that may be
recorded on a disc is 99.
• Note that some rare CD-R/CD-RW audio
recording discs may be used for single-speed
recordings only. If you use a disc with such a
warning, make certain not to dub at 2x or 4x
speed. However, the CDR 30 has been tested
for compatibility with a wide range of blank
discs from manufacturers throughout the
world. In most cases, blank discs will produce
high-quality recordings at any dub speed.
• In some rare cases, a CD player may not play
certain CD-R discs. If you find that a CD-R disc
plays in some players but not in others, the
fault is most likely with the player, not with the
recorded disc or the CDR 30. Remember that
CD-RW discs made in the CDR 30 will play only
in CD players that are specially designed to
accommodate CD-RW discs. Note that most
DVD players are compatible with finalized CD-
RW discs, but many are not with CD-R discs.
Some commercial CD discs may contain a copy
protection data bit that will prevent a digital
copy of the disc to be dubbed from external CD
players (analog copies always can be made
from external sources as well as internal dub-
bings, see next chapter). In that case, the Copy
Prohibit Indicator
I
will light to remind
you that the inability to record is intentional,
and not the result of a problem with the
CDR 30.
This product is equipped with the Serial Copy
Management System (SCMS) to protect the
rights of copyright owners.Although it is
possible to make a copy of most CDs for
your own personal use, it is not possible to
make a digital copy from another digital copy,
including CDP, although it is possible to make
an analog copy of a digital copy.
The CDR 30 will not copy DVD discs, computer-
data discs, CD-based computer or video-game
discs, or digital audio discs with a sample rate
that is not compatible with the range of the
CDR 30s sample-rate converter.
• Discs containing MP3 data may only be copied
to the standard CD Audio format.
Recordings on the CDR 30 may be made in a
number of ways:
Discs may be dubbed using the playback deck
on the CDR 30 as a source.These copies may
be made in real time, at twice normal speed, or
at four times normal playback speed (from
MP3 discs only in real time). More information
on Disc Dubbing see next chapter.
Synchronized digital Recordings may be made
from an external CD or MD player or other digi-
tal source that is synchronized with the dub
being made in the CDR 30, see chapter "Sync
Recording" on page 23.
Analog or digital recordings may be made from
any compatible external digital source, see
chapter "Recording From an External Source"
on next page.
Analog recordings may be made from any
external analog source, see chapter "Recording
From an External Source" on next page.
Disc Dubbing
The easiest way to make a copy of an entire disc
is to use the CDR 30’s internal dub capability.
First, insert a blank CD-R/CD-RW or a disc with
sufficient blank space for recording in the
Record Drawer
%
. When the disc is inserted,
the CDR 30 will examine it to determine if it is a
CD-R or CD-RW disc, and optimize itself for the
best possible recording. This is indicated by OPC
message (Optical Processing Calibration) in the
Time/Message Display
F
.
Place the disc to be dubbed in the Play Drawer
3
and wait until the Table of Contents data is
read and the Time/Message Display
F
shows
the track and running time data for the disc.
Next, select a dub speed. The default speed is 4
times dubbing, where the recording takes only
1/4 of the actual running time of the disc.
However, with the CDR 30 you may also select
x1 (real time) dubbing or x2 dubbing. Press the
Speed button
!
to select a speed as indicated
by the x2/x4 Indicators
H
. When no Speed
Indicator lights, the unit is set to real-time
recording. Note that the slower the record-dub
speed, the more tolerant the unit is of errors on
the blank or played disc. However, with most
high-quality blank discs, the 2x and 4x speeds
should not present a problem. Note also the 2x
and 4x speed dub is not possible with an MP3
disc.
Before beginning a dub, make certain that there
is sufficient blank space on the record disc. To do
this, select the total remaining time to be shown
in the record side Time/Message Display
F
by pressing the Display button
ˆ
R
once in
stop mode.That number should be greater than
the total time of the disc to be dubbed, which is
shown in the play side Time/Message Display
F
.
If you wish to copy the entire disc, proceed to the
next step. However, if you wish to copy only one
track from a disc, first select that track by press-
ing the Next Button
˝
M
until the track
number appears in the Time/Message Display
F
or enter the track number directly with the
Numeric Keys
E
on the remote.
When you are ready to start the dub, press the
Dubbing Button ) if the entire disc (or all
tracks programmed, see Notes on page 22) is to
be copied, or the 1 Track Dub Button 9,if
you wish to copy only one track. During this
process the Dubbing Indicator J will light,
the Record Indicator O will flash, a BUSY
message will flash in the Record Deck’s Time/
Message Display
F
and all tracks on the disc
to be dubbed will be examined if copy prohibited
or not and their numbers will count up subse-
quently in the playback deck´s Information
Display
˜
(not with MP3 discs). When the
record side Information Display returns to nor-
21

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Harman Kardon CDR 30 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Harman Kardon CDR 30 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,67 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info