502638
42
Verklein
Vergroot
Pagina terug
1/60
Pagina verder
ADVANCED FEATURES
The AVR 7300 is equipped with a number of
advanced features that add extra flexibility to the unit’s
operation. While it is not necessary to use these fea-
tures to operate the unit, they provide additional
options that you may wish to use.
Front-Panel Display Fade
In normal operation, the front-panel displays and indi-
cators remain on at full brightness, although you may
also dim them or turn them off as shown on page 41.
As an additional option, you may also set the AVR so
that the displays appear whenever a button is pressed
on the front panel or remote, but then fade out after a
set period of time.
To set the front-panel displays to the Fade mode,
press the OSD Button U to bring the Master
Menu to the screen. Press the
/
¤
Navigation
Button o so that the cursor is pointed to the
ADVANCED line, and press the Set Button q
to enter the ADVANCED SELECT menu
(Figure 19).
Figure 19
With the ADVANCED SELECT menu on
your video display, press the
/
¤
Navigation
Button o so that the cursor is pointed to the
VFD FADE TIME OUT line. Next, press the
/
Navigation Button o so that the amount
of time that you wish the displays to fade out after
a button is pressed is shown.
Once this time is set and the unit returned to normal
operation, the displays will remain on for the time peri-
od selected whenever a button is pressed on the front
panel or remote. After that time, they will gradually fade
out, with the exception of thelighting around the
Standby/On Button 1, which remains on to remind
you that the AVR is turned on.
If you wish to make adjustments to other items on
the ADVANCED SELECT menu, press the
/
¤
Navigation Button o to place the cur-
sor next to the desired item, or place the cursor
next to the BACK TO MASTER MENU line
and press the Set Button q to make an adjust-
ment to another menu. If you have completed all
adjustments, press the OSD Button U to exit the
menu system.
Display Brightness
The AVR 7300’s front-panel displays and indicators
are set at a default brightness level that is sufficient for
viewing in a normally lit room. However, you may wish
to occasionally lower the brightness of the display, or
turn it off completely.
To change the display brightness setting for a specific
listening session, use the Dim function as shown on
page 41 in the Operation Section of this manual,
or make an adjustment in the ADVANCED
SELECT menu. To start the adjustment, press the
OSD Button U to bring the MASTER MENU
to the screen. Press the
¤
Navigation Button o,
until the on-screen cursor is next to the
ADVANCED line. Press the Set Button q to
enter the
ADVANCED SELECT
menu
(Figure 19).
To change the brightness setting, at the
ADVANCED SELECT menu, make certain
that the on-screen cursor is next to the VFD line,
and press the
Navigation Button o until the
desired brightness level is shown in the video display.
When FULL is shown, the display is at its normal
brightness. When HALF is highlighted, the display is
at half the normal brightness level, but the blue lighting
inside the Volume Control # will go out. When
OFF is shown, all of the front-panel indicators
will go dark.
Once the desired brightness level is selected, it will
remain in effect until it is changed again or until the
unit is turned off.
If you wish to make other adjustments, press the
/
¤
Navigation Button o until the on-screen
cursor is next to the desired setting or the BACK
TO MASTER MENU line and press the Set
Button q. If you have no other adjustments to
make, press the OSD Button U to exit the
menu system.
Turn-On Volume Level
As is the case with most audio/video receivers, when
the AVR 7300 is turned on, it will always return to
the volume setting in effect when the unit was turned
off. However, you may prefer to always have the
AVR 7300 turn on at a specific setting, regardless of
what was last in use when the unit was turned off. To
change the default condition so that the same volume
level is always used at turn-on, you will need to make
an adjustment in the ADVANCED SELECT
menu. To start the adjustment, press the OSD Button
U
to bring the MASTER MENU (Figure 1)
to the screen. Press the
¤
Navigation Button
o,
until the on-screen
cursor is next to the
ADVANCED line.
Press the Set Button q to
enter the ADVANCED SELECT menu (Figure 19).
At the ADVANCED SELECT menu, make
certain that the on-screen cursor is next to the
VOLUME DEFAULT line by pressing the
/
¤
Navigation Button o as needed. Next,
press the
Navigation Button o so that the word
ON is shown in the video display. Next, press the
¤
Navigation Button o once so that the on-screen
cursor is next to the DEFAULT VOL SET
line. To set the desired turn-on volume, press the
/
Navigation Button o until the desired volume level
is shown on the DEFAULT VOL SET line.
This setting may NOT be made with the regular vol-
ume controls.
NOTE: Since the setting for the turn-on volume can-
not be heard while the setting is being made, you
may wish to determine the setting before making the
adjustment. To do this, listen to any source and adjust
the volume to the desired level using the regular
Volume Controls )r
î
. When the desired
volume level to be used at turn-on is reached, make a
note of the setting as it appears in the lower third of
the video screen or in the Lower Display Line $.
(A typical volume level will appear as a negative
number such as –25dB.) When making the adjust-
ment, use the
/
Navigation Button o to enter
this setting.
Unlike some of the other adjustments in this menu, the
turn-on volume default will remain in effect until it is
changed or turned off in this menu, even when the
unit is turned off.
If you wish to make other adjustments, press the
/
¤
Navigation Button o until the on-screen
cursor is next to the desired setting or the
BACK TO MASTER MENU line, and press
the Set Button q. If you have no other adjust-
ments to make, press the OSD Button U to exit
the menu system.
Semi-OSD Settings
The semi-OSD system places one-line messages at
the lower third of the video display screen whenever
the Volume, Input Source, Surround mode, tuner
frequency or any of the configuration settings is
changed. The semi-OSD system is helpful in that it
enables you to have feedback on any control changes
or remote commands using the video display when it
is difficult to view the front-panel displays. However,
you may also prefer to turn these displays off perma-
nently. You may also want to adjust the length of time
the displays remain on the screen. Both of those
options are possible with the AVR 7300.
* ADVANCED SELECT *
VFD FADE TIME OUT:OFF
VFD :FULL
VOLUME DEFAULT :OFF
DEFAULT VOL SET :25dB
SEMI OSD/TIME OUT:5S
FULL OSD TIME OUT:20S
BACK TO MASTER MENU
42 ADVANCED FEATURES
AVR7300(120v)-OM 6/14/04 9:15 AM Page 42
42

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Harman Kardon AVR7300 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Harman Kardon AVR7300 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,17 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info