502638
38
Verklein
Vergroot
Pagina terug
1/60
Pagina verder
When Dolby Digital 3/2/.1 or DTS or DTS-ES signals
are being played, the DPR will automatically switch to
the proper surround mode, and no other processing
may be selected. When a Dolby Digital signal with a
3/1/0 or 2/0/0 signal is detected, you may select any
of the Dolby surround modes.
When DS-OFF appears as a message, it indicates
that there is no Dolby Surround data flag in the audio
bitstream. Similarly, EX-OFF indicates that there
is no Dolby Digital EX data flag. In the case of a
DS-OFF message, you may manually select a
Dolby Pro Logic mode to add a multichannel presen-
tation to the stereo material. In the case of the
EX-OFF message, when your system is config-
ured for surround back speakers you may manually
select Dolby Digital EX as the processing mode to add
rear surround speakers to the sound field.
It is always a good idea to check the channel data to
make certain that it matches the audio logo informa-
tion shown on the back of a DVD package. In some
cases, you will see an indication for “2/0/0” even
when the disc contains a full 5.1, or 3/2/.1, signal.
When this happens, check the audio output settings
for your DVD player or the audio menu selections for
the specific disc being played to be sure that the
player is sending the correct signal to the AVR.
An UNLOCK message may appear in the Lower
Display Line $. This is your indication that the digi-
tal audio data stream has been interrupted or is no
longer present. When that occurs, the unit’s digital sig-
nal processor has no signal to lock onto, and is thus
“unlocked. You may see this message when a DVD is
first started until the stream is playing and the proces-
sor determines which mode to apply; or any time the
data stream is stopped or paused, such as when the
menus of some discs are displayed or when the player
is switching between the different sections of a disc.
You may also see the message when a satellite
receiver, cable set-top or HDTV tuner is in use if the
digital audio is temporarily interrupted when channels
are changed or when a cable box switches from a
channel with a digital data stream to a channel with
analog audio only. The UNLOCK message is nor-
mal, and does not indicate any problem with your
receiver. Rather, it tells you that the incoming data has
simply been paused or is not present for a variety of
possible reasons.
PCM Playback
PCM is the abbreviation for Pulse Code Modulation,
which is the type of digital signal used for standard CD
playback, and other non-Dolby Digital and non-DTS
digital sources such as Mini-Disc. When a PCM signal
is detected, the Lower Display Line $ will briefly
show a message with the letters PCM, in addition to a
readout of the sampling frequency of the digital signal.
In most cases, this will be PCM 44.1kHz or
PCM 48kHz, though in the case of specially
mastered, high-resolution audio discs, you will see a
PCM 96kHz indication. Note that the sampling rate
displayed is that of the incoming digital signal, and not
the upsampled rate that may be applied to PCM sources
when Dolby Pro Logic, Pro Logic II or Pro Logic IIx
processing is applied, as shown on pages 25–26.
During PCM playback you may select any surround
mode except one of the Dolby Digital or DTS/DTS-ES
modes. However, when a CD with HDCD encoding is
being played you must select the Surround Off (stereo)
mode to take advantage of the HDCD process.
HDCD Playback
High Definition Compatible Digital,
®
or HDCD, discs are
recorded using a 20-bit encoding and other propri-
etary processing for the ultimate in CD listening. When
an HDCD-encoded disc is playing and the CD
player is connected using a digital connection, the
AVR 7300 will automatically recognize the HDCD
encoding and activate the circuits required for proper
playback, provided that the Surround Off mode is
selected. An HDCD message will appear in the Lower
Display Line $ to confirm the HDCD playback.
HDCD playback is limited to two-channel stereo only.
Speaker/Channel Indicators
In addition to the bitstream indicators, the AVR 7300
features channel-input indicators that show how many
channels of digital information are being received
and/or whether the digital signal is interrupted.
These indicators are the L/C/R/LFE/SL/SR/SBL/SBR
letters that are inside the center boxes of the
Speaker/Channel Input Indicators @ on the front-
panel. When a standard analog signal is in use, only
the “L” and “R” indicators will light, as
analog signals
have only left and right channels.
Digital signals, may have two, five, six or seven chan-
nels; depending on the program material, its method of
transmission and the way in which it was encoded.
When a digital signal is playing, the letters in these
indicators will light in response to the signal being
received. It is important to note that although Dolby
Digital, for example, is referred to as a “5.1” system,
not all Dolby Digital DVDs or programs are encoded
for 5.1. Thus, it is sometimes normal for a DVD with a
Dolby Digital soundtrack to trigger only the “L” and “R”
indicators.
NOTE: Many DVD discs are recorded with both “5.1”
and “2.0,” and Dolby Digital and DTS versions of the
same soundtrack. When playing a DVD, always be
certain to check the type of material on the disc. Most
discs show this information using icons on the back of
the disc jacket. When a disc offers multiple soundtrack
choices, you may have to make some adjustments to
your DVD player (usually with the Audio Select” button
or in a menu screen on the disc) to send a full 5.1
feed to the AVR 7300 or to select between Dolby
Digital or DTS. It is also possible for the type of signal
feed to change during the course of a DVD’s play-
back. In some cases, the previews or special material
will be recorded in 2.0 audio, while the main feature is
available in 5.1 audio. The AVR 7300 will automatically
sense changes to the bitstream and channel count
and reflect them in these indicators.
The letters used by the Speaker/Channel Input
Indicators @ also flash to indicate when a bitstream
has been interrupted. This will happen when a digital
input source is selected before the playback starts, or
when a digital source such as a DVD is paused. The
flashing indicators, along with the UNLOCK mes-
sage in the Lower Display Line $, remind you
that the playback has stopped due to the absence
of a digital signal and not through any fault of the
AVR 7300. This is normal, and the digital playback
will resume once the playback is started again.
Night Mode
A special feature of Dolby Digital is the Night mode,
which enables specially encoded Dolby Digital input
sources to be played back with full digital intelligibility
while reducing the minimum peak level by 1/4 to 1/3.
This prevents abruptly loud transitions from disturbing
others, without reducing the impact of the digital
source. The Night mode is available only when Dolby
Digital signals with special data are being played.
The Night mode may be engaged when a Dolby
Digital DVD is playing by pressing the Night Mode
Button T on the remote. Next, press the
/
¤
Navigation Button o to select either the middle
range or full compression versions of the Night
mode. To turn the Night mode off, press the
/
¤
Navigation Button o until the message in the
lower third of the video display and in the Lower
Display Line $ reads D-RANGE OFF.
The Night mode may also be selected to always be on
at either level of compression using the options in the
DOLBY SURR menu. See page 25 for informa-
tion on using the menus to set this option.
OPERATION
38 OPERATION
AVR7300(120v)-OM 6/14/04 9:15 AM Page 38
38

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Harman Kardon AVR7300 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Harman Kardon AVR7300 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,17 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info