502638
19
Verklein
Vergroot
Pagina terug
1/60
Pagina verder
INSTALLATION AND CONNECTIONS 19
INSTALLATION AND CONNECTIONS
on page 48. You may also “learn” the codes for most
remotes to any input button on the remote by follow-
ing the instructions for “Learning Commands” as
shown on page 47.
4. Connect the analog left/right audio and composite
video or S-Video and analog left/right audio outputs
of a DVD player to the DVD Audio and Video
Input Jacks ©I on the rear panel.
5. Connect the optical or coaxial digital audio outputs
of a DVD player, satellite receiver, cable box, HDTV
tuner or video game to any of the Optical or
Coaxial Digital Inputs ®† . The
recommended connection for a DVD player is to
use a coaxial digital link connected to the Coaxial
Digital Audio Input 1, but you may change the
digital audio input assignment for any source using
the IN/OUT SETUP menu, as described
on page 23, or the Digital Input Selector
p on the front panel or remote, as described on
page 37.
NOTE: When connecting a device such as a digital
cable box or other set-top tuner product with a digital
audio output, we recommend that you connect both
the digital and analog outputs of the product to your
AVR. The audio input polling feature of the AVR will
then be able to make certain that you have a constant
audio feed, since it will automatically switch the audio
input to the analog jacks if the digital feed is interrupted
or not available for a particular channel.
6. If your DVD player has Y/Pr/Pb analog compo-
nent video outputs, connect them to the DVD
Component Video Inputs F. Although this set of
inputs may be assigned to any of the five video
inputs on the AVR 7300, the factory default is for
this input to be assigned to the DVD. Remember
to make a digital audio connection between the
DVD player and the AVR, with the Coaxial Digital
Input 1 being the factory default. For informa-
tion on changing the input assignments for either
the component video jacks or the DVD player’s
audio connection, see page 23.
7. If you have other devices with Y/Pr/Pb or RGB
component video outputs, connect the source
device to the Component Video 1 or 2 Inputs
GH. The audio connections may be made to
any of the analog left/right panel audio inputs or
the Optical or Coaxial Digital Inputs ®†
. Make certain that the audio and video
inputs are properly configured for their analog or
digital audio connection source, in the IN/OUT
SETUP menu, as described on page 23.
8. If the component video inputs are used, connect
the Component Video Monitor Outputs E to
the component video inputs of your TV, projector
or other display device.
9. If you have a camcorder, video game or other
audio/video device that is connected to the AVR
on a temporary, rather than permanent, basis,
connect the audio, video and digital audio outputs
of that device to
the Front-Panel Inputs
. A device connected
here is
selected as the Video 5 input, and the digital
inputs must be assigned to the Video 5 input.
(See page 23 for more information on input
configuration.)
10. When connecting the AVR 7300 to a “digital ready”,
“HDTV compatible” or high-definition display (which
is any device capable of accepting an input signal of
480P or higher), you are able to take advantage of
the unit’s advanced video processing circuitry which
converts all video signals to a 480P output. Since
the AVR 7300 displays the on-screen menus
with upconverted video, the connection from the
AVR 7300 to the display need only be one set
of Y/Pr/Pb component video cables to the
Component Video Monitor Output E.
11. When connecting the AVR 7300 to a standard,
analog video display that has standard composite
and S-Video inputs only, component video inputs
may not be used. In this case, connect the Video
Monitor Output J to the matching composite
and S-Video inputs on your video display, depend-
ing on which types of video are used by your
source devices.
NOTE: When source devices such as a progressive
scan DVD player or HDTV set-top box are connected to
the AVR 7300 via component video connections, it is
also necessary to connect the standard, composite or
S-Video outputs of the source device to the AVR 7300
if you wish to take advantage of the record outputs or
have video routed to a second room. The record out-
puts and multiroom system cannot accept component
inputs, nor are component inputs down-converted for
use with these outputs.
System and Power Connections
The AVR 7300 is designed for flexible use with multi-
room systems, external control components and
power amplifiers.
Main Room Remote Control Extension
If the receiver is placed behind a solid or smoked
glass cabinet door, the obstruction may prevent the
remote sensor from receiving commands. In this
event, an optional remote sensor may be used.
Connect the output of the remote sensor to the
Remote IR Input D jack.
If other components are also prevented from receiving
remote commands, only one sensor is needed. Simply
use this unit’s sensor or a remote eye by running a
connection from the Remote IR Output C jack to
the Remote IR Input jack on Harman Kardon (or other
compatible) equipment.
Multiroom IR Link
The remote room IR receiver should be connected to
the Multiroom IR Input B jack on the AVR 7300’s
rear panel.
If other Harman Kardon-compatible source equipment
is part of the main room installation, the Remote IR
Output
C
jack on the rear panel should be connected
to the IR IN jack on source equipment. This will enable
the remote room location to control source equipment
functions.
NOTE: All remotely controlled components must be
linked together in a “daisy chain.” Connect the IR OUT
jack of one unit to the IR IN of the next to establish
this chain.
Multiroom Connections
The AVR 7300 is equipped with multizone capabilities
that allow it to send an audio and/or video source to a
remote zone that is different from the one selected for
use in the main room. Please note that this capability
applies to analog inputs from sources such as the
AVR’s tuner, tape decks or VCRs. If you wish to use a
source such as a DVD or CD player that is normally
connected via a digital connection, it is necessary to
run an analog connection from the source to the AVR
or to use the Main Downmix input option, as explained
on page 44.
Depending on your system’s requirement,
three options are available for remote room audio
connection:
Option 1: Use high-quality, shielded audio intercon-
nect cable from the AVR 7300’s location to the
remote room. In the remote room, connect the inter-
connect cable to an optioinal external stereo power
amplifier. The amplifier will be connected to the room’s
speakers. At the AVR 7300, plug the audio intercon-
nect cables into the Multiroom Audio Outputs ø
on the AVR 7300’s rear panel.
Option 2: Connect the Multiroom Audio Outputs
ø on the AVR 7300 to the inputs of an optional
stereo power amplifier. Run high-quality speaker wire
from the amplifier to the speakers in the remote room.
Option 3: Taking advantage of the AVR 7300’s built-
in seven-channel amplifier, it is possible to use two of
the amplifier channels to power speakers in the remote
room. When using this option, you will not be able to
1
4
1
2
1
0
1
2
1
0
6
1
2
1
0
AVR7300(120v)-OM 6/14/04 9:15 AM Page 19
19

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Harman Kardon AVR7300 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Harman Kardon AVR7300 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,17 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info