502637
44
Verklein
Vergroot
Pagina terug
1/52
Pagina verder
44 CONFIGURING THE REMOTE
CONFIGURING THE REMOTE
Figure 57
7. Once the punch-through is programmed, the
Channel Up/Down Buttons of the second device
named will be used when those buttons
X
are
pressed while the master device is in use.
Returning the Channel Control Settings to
Default Operation:
If you wish to remove the Channel Punch-Through
so that the commands for Channel Up/Down are
returned to the factory default setting, follow the steps
shown above, except that in Steps 4 and 5, select
the same device for both the
DEVICE IN USE on
the left side of the bottom line and the PUNCH-
THROUGH device. In the example used, the display
to return the remote to default settings will appear as
shown in Figure 58.
Figure 58
Transport Punch-Through
The Transport Controls Play q, Stop
J
,Fast
Forward/Reverse
I
,Pause
J
, Record
J
and Skip Up/Down
K
are set at the factory to
operate your DVD player, or the controls of a specific
device such as a VCR or CD player when they are
selected. However, by using the Transport Punch-
Through feature you may program these controls to
transmit the commands for a different device. For
example, you may wish to operate the transport of a
second VCR connected to the VID 2/TV input, as
shown in the following example.
1. Press and hold the
Program Button
O
for
about three seconds while the message shown
in Figure 15 appears in the remote’s LCD
Information Display
2
. Release the button
when the red light under the Set Button
F
appears.
2. The remote’s MAIN MENU message (Figure 16),
will appear in the LCD display and the Set Button
F
will remain illuminated in red. Press the
/
¤
Navigation Button n until PUNCH-
THROUGH appears on the bottom line of the
LCD screen, as shown in Figure 48. Press the Set
Button
F
to enter the main punch-through
menu branch.
3. At the next menu screen, press the
/
¤
Navigation Button n until TRANSPORT
appears on the bottom line of the LCD screen, as
shown in Figure 59. Press the Set Button
F
to begin programming the remote for transport
punch-through.
Figure 59
4. The next display screen (Figure 60) is where you
select the device that will receive the punch-
through commands. In our example, that is the
TV button, as that is where we want the VCR’s
transport controls to be active. Press the
/
¤
Navigation Button n until the name of the
base device appears and then press the Set
Button
F
.
Figure 60
5. At the next display screen (Figure 61), you will
select the device whose transport commands will
be used. Press the
/
¤
Navigation Button
n until the desired device name appears to the
right of the device in use. In our example, that is
the VCR. When the desired combination of devices
appears, press the
Set Button
F
.
Figure 61
6. When the Set button is pressed, the display will
change to show you that the new combination of
control commands is being saved to the unit’s
memory, as shown in Figure 62. The word
SAVED will flash four times and then the remote
will return to normal operation.
Figure 62
7. Once the punch-through is programmed, the
transport buttons of the second device named
will be used when those buttons are pressed while
the master device is in use.
Returning the Transport Control Settings to
Default Operation:
If you wish to remove the Transport Punch-Through so
that the transport commands are returned to the facto-
ry default setting, follow the steps shown above, except
that in Steps 4 and 5, select the same device for both
the
DEVICE IN USE on the left side of the bottom
line and the PUNCH-THROUGH device. In the
example used, the display to return the remote to
default settings will appear as shown in Figure 63.
Figure 63
EzSet Configuration
Harman Kardon’s patented EzSet feature makes it easier
than ever to calibrate the output levels on your new
receiver for maximum playback accuracy. In addition to
automatically setting the levels, the AVR remote’s LCD
display allows the unit to be used as a direct read-out
SPL meter. Complete instructions for using the EzSet
features of the AVR remote are found on pages 24
through 26 of this owner’s manual.
In most cases you will find it easier to access the EzSet
capabilities directly by pressing the
SPL Select Button
g and following the menu prompts as detailed on
pages 24 – 25. However, there is one function of the
remote that is only available through the remote’s
menu system being described in this section.
To avoid having the calibration settings created with
EzSet changed accidentally, the remote allows you to
disable the
SPL Select Button g on the remote.
To de-activate the button, follow these steps:
1. Press and hold the Program Button
O
for
about three seconds while the message shown
in Figure 15 appears in the remote’s LCD
Information Display
2
. Release the button
when the red light under the Set Button
F
appears.
2.
The remote’s MAIN MENU message (Figure 16),
will appear in the LCD display and the Set Button
F
will remain illuminated in red. Press the
/
¤
Navigation Button n until SET SPKR LEV-
ELS
appears on the bottom line of the LCD
screen, as shown in Figure 64. Press the
Set
Button
F
to enter the main EzSet menu
branch.
Figure 64
3. At the next menu screen (Figure 65) press the
/
¤
Navigation Buttons n once so that
EZSET DISABLE appears in the lower line of
the LCD display.
Figure 65
4. Within five seconds, press the Set Button
F
to
disable the
SPL Select Button g. Once the
Set Button
F
is pressed the word EXITING
will flash four times in the lower line of the LCD
display and then it will return to normal operation.
Once these steps are completed, when the SPL
Select Button h is pressed the remote will show
EZSET DISABLE and it will not be activated.
SET SPKR LEVELS
EZSET DISABLE
MAIN MENU
SET SPKR LEVELS
PUNCH-THROUGH
TV< -TV
TV< -VCR [TRS]
SAVED
PUNCH-THROUGH
TV< -VCR
DEVICE IN USE
TV
PUNCH-THROUGH
TRANSPORT
PUNCH-THROUGH
VCR< -VCR
VCR< -CBL [CHAN]
SAVED
AVR 7200 OM 1/27/03 4:47 PM Page 44
44

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Harman Kardon AVR7200 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Harman Kardon AVR7200 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,85 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info