502637
6
Verklein
Vergroot
Pagina terug
1/52
Pagina verder
8 Surround Mode Selector: Press this button
to select from among the available surround mode
options for the major mode group selected. The
specific modes will vary based on the number of
speakers available, the major mode group and
whether the input source is digital or analog. For
example, press the Surround Mode Group Selector
7 to select a major mode grouping such as Dolby or
Logic 7, and then press this button to see the specific
mode choices that are available. For more information
on mode selection, see page 28.
9 Tuning Selector: Press the left side of the button
to tune lower-frequency stations and the right side of
the button to tune higher-frequency stations. When a
station with a strong signal is reached, the
TUNED
Indicator I will be lit in the Main Information
Display ˜.
)‹Button: When making system configuration
changes using the front-panel controls, press this but-
ton to scroll left through the available choices for the
option being adjusted.
! Tuner Band Selector: Pressing this button will
automatically switch the AVR 7200 to the Tuner mode.
Pressing it again will switch between the AM and FM
frequency bands. (See page 32 for more information
on the tuner.)
@ Set Button: When making system configuration
changes using the front-panel controls, press this but-
ton to enter a setting into the unit’s memory.
#
Button: When making system configuration
changes using the front-panel controls, press this but-
ton to scroll right through the available choices for the
option being adjusted.
$ Preset Station Selector: Press this button to
scroll up or down through the list of stations that have
been entered into the preset memory. (See page 32
for more information on tuner programming.)
% Input Source Selector: Press this button to
change the input by scrolling up or down through the
list of input sources.
^ Tuner Mode Selector: Press this button to select
Auto or Manual tuning. When the button is pressed so
that the
AUTO Indicator J lights, the tuner will search
for the next station with an acceptable signal when the
Tuning Selector 9w
é
is pressed. When the
button is pressed so that the AUTO Indicator J is not
lit, each press of the Tuning Selector 9w
é
will
increase the frequency. This button may also be used to
switch between Stereo and Mono modes for FM radio
reception. When weak reception is encountered, press
the button until the
Stereo Indicator H goes out to
switch to Mono reception. Press and hold again to
switch back to Stereo mode. (See page 32 for more
information on using the tuner.)
& Optical 3 Digital Input: Connect the optical digital
output of an audio or video product to this jack.
* Input/Output Status Indicator: This LED indicator
will normally light green to show that the front-panel
Coaxial 3 Digital Input/Output Jack ( or the front-
panel Video 4 Input/Output Jacks Ó are operating
as inputs. When these jacks are configured for use as
an output, the indicator will turn red to show that the
jack may be used for recording. (See page 32 for more
information on configuring the front-panel jacks as out-
puts, rather than inputs.)
( Coaxial 3 Digital Input/Output: Connect the
coaxial digital input or output for a digital audio prod-
uct such as a portable audio player or video game to
this jack. The jack is normally an input, but may be
switched to an output for recording using the menu
system. See page 32 for more information.
Ó Video 4 Input/Output Jacks: These audio/video
jacks may be used for temporary connection to video
games or portable audio/video products such as cam-
corders and portable audio players. These jacks are
normally inputs, but may be switched to outputs for
recording using the menu system. See page 32 for
more information.
Ô Bass Control: Use this control to boost or reduce
the low-frequency output of the left/right front chan-
nels by as much as ±10dB. Set this control as you
find suitable to adjust to your specific taste or room
acoustics.
Balance Control: Use this control to change the
relative volume for the front left/right channels.
NOTE: When multichannel surround modes are in use,
this control should be at the midpoint, or “12 o’clock”
position for proper operation.
Ò Treble Control: Use this control to boost or
reduce the high-frequency output of the left/right front
channels by as much as ±10dB. Set this control as
you find suitable to adjust to your specific taste or
room acoustics.
Ú Channel Adjust Selector: Press the button to
begin the process of adjusting the channel level out-
puts using the source currently playing through your
AVR. For complete information on adjusting the chan-
nel output level, see page 33.
Û Delay Adjust Selector: Press this button to
begin the process of adjusting the delay settings for
Dolby surround modes. See page 23 for more infor-
mation on delay adjustments.
Ù Digital Input Selector: Press this button to begin
the process of selecting a digital source for use with
the currently selected input. Once the button has been
pressed, use the
or Buttons )# to choose
the desired input and then press the Set Button @
to enter the setting into the unit’s memory. See page
30 for more information on digital audio.
ı Volume Control: Turn this knob clockwise to
increase the volume, counterclockwise to decrease the
volume. If the AVR 7200 is muted, adjusting volume
control will automatically release the unit from the
silenced condition.
ˆ Input Indicators: A green LED will light to the left
of the input that is currently the input source for the
AVR 7200.
˜ Main Information Display: This display delivers
messages and status indications to help you operate
the receiver. (See page 7 for a complete explanation
of the Information Display.)
¯ Remote Sensor Window: The sensor behind
this window receives infrared signals from the remote
control. Aim the remote at this area and do not block
or cover it unless an external remote sensor is
installed.
˘ Surround Mode Indicators: These LEDs will
light to show the surround mode and digital bitstream
in use. Note that depending on the specific combina-
tion of input sources and surround mode selected,
more than one indicator may light. (See page 28 for
more information.)
FRONT-PANEL CONTROLS
6 FRONT-PANEL CONTROLS
AVR 7200 OM 1/27/03 4:46 PM Page 6
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Harman Kardon AVR7200 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Harman Kardon AVR7200 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,85 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info