502558
49
Verklein
Vergroot
Pagina terug
1/68
Pagina verder
MULTIROOM OPERATION 49
ENGLISH
Multiroom Operation
Multiroom Operation
The AVR is fully equipped to operate as the con-
trol center for a complete multiroom system that
is capable of sending one source to a second
zone in the house while separate source is
listened to in the main room. In addition to
providing for control over the selection of the
remote source and its volume, the AVR offers a
comprehensive range of options for powering the
speakers in the second zone.
• Using the line-level Multiroom Audio
Outputs
7
, the selected source may be fed to
optional, external power amplifiers that may be
matched to the specifics of the installation.
When the main room system is configured for
5.1 operation, the Surround Back Left/Right
amplifier channels may be used to power the
remote zone so that no additional amplifiers are
required.
• Using built-in A-BUS/
READY
®
technology,
optional A-BUS modules may be connected to
the AVR via a single Category Five wire, so that
remote zone speakers may be powered directly
from the module or keypad without the need for
additional power, IR sensor or volume control
wires to be run to the second zone.
In addition, the AVR includes a remote IR sensor
input so that remote control commands from the
Zone II remote included with the unit may be
transmitted to the unit, while standard IR
input/output jacks allow the remote zone’s
commands to be sent to compatible IR-controlled
source devices.
Installation
Although simple remote room systems may be
installed by the average do-it-yourself hobbyist,
the complexity of your multizone/multiroom
system involves running wires inside of walls
where the services of a specially trained installer
may be required. Regardless of who does the
work, please remember that local building codes
may govern in-wall electrical work, including
proper specification of any wiring used and the
way in which it is connected. You are responsible
for making certain that all Multiroom installation
work is done properly and in compliance with all
applicable codes and regulations.
For standard installations, follow the instructions
shown on page 16 and 18 for the connection of
speaker wire and IR remote wiring to the AVR.
For installations where the Surround Back
Left/Right amplifier channels are used to power
the remote zone, make certain that the system is
configured for that type of operation, as shown
on page 49.
For installations where A-BUS modules are used,
follow the instructions provided with the A-BUS
remote modules or keypads.
Additional information will also be made
available through the Harman Kardon
Web Site at
www.harmankardon.com.
RS-232 Control
The AVR is rare among A/V receivers in that it
provides the capability for full remote control
from compatible computers or specialized remote
control systems. RS-232 programming requires
specialized programming knowledge and for that
reason we recommend that it only be done by
qualified installers.
NOTE: The RS-232 port on this product is
for use by authorized service personnel
ONLY.
For more information on using the RS-232 port
for remote control, visit the Harman Kardon Web
site at
www.harmankardon.com
or contact our customer service department.
Multiroom Setup
Once the audio and IR link connections have
been made, the AVR needs to be configured for
multiroom operation using the steps below. Press
the OSD button
L
to bring the MASTER
MENU
(Figure 7) to the screen. Press the
button
E
twice, until the on-screen cursor is
next to the
MULTI-ROOM line. Press the Set
button
F
to enter the MULTI-ROOM
menu (Figure 24).
Figure 24
When the MULTI-ROOM menu appears, the
on-screen cursor will be at the
MULTI-
ROOM
line. Since this line is used to turn the
system on and off, do not make an adjustment
here unless you wish to turn the system on at
this time. To turn the system on, press the
button
E
so that ONis highlighted. If you do
not wish to turn the system on at this time or to
proceed to the next step, press the
¤
Button
E
once so that the on-screen cursor is next
to the
MULTI IN line.
At the
MULTI IN line, press the
/
buttons
E
until the desired Audio/Video input to the
multi-room system appears in the highlighted
video. When the selection has been made, press
the
¤
button
E
once so that the on-screen
cursor is next to the
MULTI VOL line.
At the
MULTI VOL line, press the
/
buttons
E
or hold them pressed until the
desired volume level for the multi-room system is
entered. DO NOT use the regular volume control
knobs for this setting. When all settings for the
multiroom setup have been made, press the
¤
buttons
E
once so that the on-screen
cursor is next to the
BACK TO MASTER
MENU
line and press the Set button
F
. If you
have no other adjustments to make, press the
OSD button
L
to exit the menu system.
Surround Amplifier Channel Assignment
The AVR is equipped with seven full-power
amplifier channels to allow for complete
7.1-channel operation without the need for
additional external amplifiers. However, in some
installations you may wish to use the traditional
5.1-channel configuration for the main listening
room, which allows the surround back left/right
amplifier channels to be used to power speakers
placed in a remote zone location.
If you wish to use the Surround Back channel
amplifiers to power the remote zone, you must
change a setting in the
MULTIROOM
SETUP
menu. To make that change, first call
up the menu system by pressing the OSD
Button
L
to bring the MASTER MENU
(Figure 7) to the screen. Next, press the
¤
Button
E
until the cursor is next to the
MULTI ROOM line. Press the Set Button
F
to enter the MULTIROOM SETUP
menu.
To change the setting so that the Surround Back
amplifiers are fed by the source selected through
the Multiroom system, press the
/
Buttons
E
so that MULTI is highlighted in reverse
video and press the Set Button
F
.
Remember that once this setting is made you will
not be able to take advantage of any of the
6.1/7.1- channel decoding or processing modes,
and no Surround Back speakers must be selected
in the speaker setup procedure outlined earlier. In
addition the speakers used for the remote zone
must be connected to the Surround Back/
Multiroom Speaker Outputs
c
. The volume
for these speakers is set by the multiroom sys-
tem, as explained on page 50 of this manual.
* MULTI-ROOM SETUP *
MULTI-ROOM :OFF ON
MULTI IN :FM PRESET01
MULTI VOL :25dB
SB AMPS :MAIN MULTI
CARRIER OUT: ZONE II
BACK TO MASTER MENU
29851_AVR645_ENG 30/10/06 9:46 Side 49
49

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Harman Kardon AVR645 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Harman Kardon AVR645 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,33 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Harman Kardon AVR645

Harman Kardon AVR645 Gebruiksaanwijzing - Nederlands - 68 pagina's

Harman Kardon AVR645 Gebruiksaanwijzing - Deutsch - 68 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info