502558
40
Verklein
Vergroot
Pagina terug
1/68
Pagina verder
40 OPERATION
Operation
Basic Operation
Once you have completed the setup and configu-
ration of the AVR, it is simple to operate and
enjoy. The following instructions should be
followed for you to maximize your enjoyment of
your new receiver:
Turning the AVR On or Off
When using the AVR for the first time, you must
press the Main Power Switch
1
on the front
panel to turn the unit on. This places the unit in a
Standby mode, as indicated by the amber color of
the Power Indicator
3
. Once the unit is in
Standby, you may begin a listening session by
pressing the System Power Control
2
or the
Source button
%
on the front panel or the
AVR Selector
5
B. Note that the Power
Indicator
3
will turn blue. This will turn the unit
on and return it to the input source that was last
used. The unit may also be turned on from Standby
by pressing any of the Source Selector buttons
on the remote
4567
BCD or
the Source button
%
on the front panel.
To turn the unit off at the end of a listening
session, simply press the System Power
Control
2
on the front panel or the Power
Off Button
3
A on the remote. Power will
be shut off to any equipment plugged into the
rear panel Switched AC Outlets
G
and the
Power Indicator
3
will turn orange.
When the remote is used to turn the unit “off” it
is actually placing the system in a Standby mode,
as indicated by the orange color of the Power
Indicator
3
.
When you will be away from home for an
extended period of time it is always a good idea
to completely turn the unit off with the front
panel Main Power Switch
1
.
NOTE: All preset memories may be lost if the
unit is left turned off with the Main Power
Switch
1
for more than two weeks.
Using the Sleep Timer
To program the AVR for automatic turn-off, press
the Sleep Button
9
on the remote. Each press
of the button will increase the time before shut
down in the following sequence:
The sleep time will be displayed in the Lower
Display Line
˜
and it will count down until
the time has elapsed.
When the programmed sleep time has elapsed,
the unit will automatically turn off (to Standby
mode). Note that the front panel display will dim
to one half brightness when the Sleep function is
programmed. To cancel the Sleep function, press
and hold the Sleep Button
9
until the infor-
mation display returns to normal brightness and
the Sleep indicator numbers disappear and the
words
SLEEP OFF appear in the Main
Information Display
˜
.
Source Selection
To select a source, press any of the Source
Selector buttons on the remote
467
CD.
NOTE: After pressing one of the Input Selector
buttons
4
D to turn the unit on, press the
AVR Selector
5
B to have the remote
control the AVR functions.
The input source may also be changed by
pressing the front-panel Input Source Selector
button
%
. Each press of the button will move
the input selection through the list of available
inputs.
As the input is changed, the AVR will automati-
cally switch to the digital input (if selected),
surround mode component video input, A/V Sync
Delay and Night Mode configurations that were
in effect the last time that input was used.
• The front-panel Video 4 Inputs
Ô
, Optical
Digital 4 Input
*
or the Coaxial Digital 4
Input
Ó
may be used to connect a device such
as a video game or camcorder to your home
entertainment system on a temporary basis.
When they are configured as outputs (see page
25) you can also connect an audio or video
recorder (composite or S-Video) for recording the
source selected.
As the input source is changed, the new input
name will appear momentarily as an on-screen
display in the lower third of the video display. The
input name will also appear in the Main
Information Display
˜
.
When a pure audio input (CD, Tuner, Tape,
6/8 Channel Input) is selected, the last video
input used remains routed to the Video Out-
puts
PR
(except from its own Video 1/ source)
and Video Monitor Output
B
. This permits
simultaneous viewing and listening to different
sources.
• When a Video source is selected, its audio
signal will be fed to the speakers and the video
signal for that input will be routed to the
appropriate Monitor Output Jack
B
and will be
viewable on a TV monitor connected to the AVR.
If a component video source is connected to the
DVD
f
or Video 1 or 2
JL
Component
Inputs, it will be routed to the Component
Video Outputs
K
. Make certain that your TV is
set to the proper input to view the appropriate
video signal (composite, S-Video or component
video.
6-Channel/8-Channel Direct Input
There are four input choices available for use
with sources such as a DVD-Audio or SACD
player that are connected to the 8-Channel
Direct Inputs
9
. Select the appropriate input
according to the way your system and source
equipment is configured:
The 6 CH DIRECT input should be used when
the SBR and SBL inputs are NOT in use and the
input source device has its own internal bass
management system. This input passes the input
from the source directly through to the volume
control without any analog to digital conversion
and it mutes the unused input jacks to prevent
unwanted noise from interfering with system
performance.
The 6 CH DVD AUDIO input should be used
when the SBR and SBL inputs are NOT in use and
the input source device does NOT have its own
internal bass management system. When this
input is in use the analog source is converted to
digital so that you may use the same Quadruple
Crossover bass management options for the
direct input as you do with all other inputs.
This input also mutes the unused input jacks to
prevent unwanted noise from interfering with
system performance.
The 8 CH DIRECT INPUT should be used when
an input is connected to all eight 8-Channel
Direct Inputs
9
and when the input source
device has its own internal bass management
system. This input passes the input from the
source directly through to the volume control
without any analog to digital conversion.
The 8 CH DVD AUDIO input should be used
when an input is connected to all eight
8-Channel Direct Inputs
9
and the input
source device does NOT have its own internal
bass management system. When this input is in
use the analog source is converted to digital so
that you may use the same Quadruple Crossover
bass management options for the direct input as
you do with all other inputs.
90
min
80
min
70
min
60
min
50
min
40
min
30
min
20
min
10
min
OFF
29851_AVR645_ENG 30/10/06 9:46 Side 40
40

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Harman Kardon AVR645 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Harman Kardon AVR645 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,33 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Harman Kardon AVR645

Harman Kardon AVR645 Gebruiksaanwijzing - Nederlands - 68 pagina's

Harman Kardon AVR645 Gebruiksaanwijzing - Deutsch - 68 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info