502550
31
Verklein
Vergroot
Pagina terug
1/58
Pagina verder
Operation
HDMI-equipped multichannel disc
player:
Connect the player’s HDMI output to one of
the AVR’s HDMI Inputs. No other connections
are necessary.
Assign the HDMI Input to both the Audio and
Video Input From Source settings in the Source
Info menu.
HDMI-equipped multichannel disc player
that does not output multichannel audio
via HDMI:
Connect the player’s HDMI output and its mul-
tichannel analog audio outputs to one of the
AVR’s HDMI Inputs and to the AVR’s 6-/8-
Channel Analog Audio Inputs.
Assign the HDMI Input to both the Audio and
Video Input From Source settings in the Source
Info menu.
Assign the 6-/8-Channel Analog Audio Inputs
to the Audio Auto Polling setting in the Source
Info menu.
When listening to DVD-Video discs, CDs or
other materials outputting standard-definition
digital audio, do nothing, as long as the HDMI
Input is assigned to the Audio Input From Source
setting.
When listening to high-resolution multichannel
discs, the AVR’s auto polling feature will auto-
matically switch to the multichannel analog
audio inputs.
Multichannel disc player without HDMI
output, or when video display has no
HDMI input:
Connect the player’s component video outputs
t
o one set of Component Video Inputs on the
AVR. Depending on the capabilities of the player
and your video display, you may need to use a
c
omposite or S-video connection instead.
Connect the player’s digital audio output to a
corresponding available digital audio input on
the AVR.
Connect the player’s multichannel audio out-
puts to the AVR’s 6-/8- Channel Analog Audio
Inputs.
Assign the correct audio and video inputs to
the Audio and Video Input From Source Settings
in the Source Info menu.
Assign the 6-/8-Channel Analog Audio Inputs
to the Audio Auto Polling setting in the Source
Info menu.
When listening to DVD-Video discs, CDs or
other materials outputting standard-definition
digital audio, do nothing, as long as the correct
digital audio input is assigned to the Audio Input
From Source setting.
When listening to high-resolution multichannel
discs, the AVR’s auto polling feature will auto-
matically switch to the multichannel analog
audio inputs.
NOTE: The 6-/8-Channel Inputs pass the incom-
ing signals directly to the volume control, with-
out digitizing or processing them. Configure the
bass management settings (i.e., speaker size,
delay and output level) on your source device to
match the settings programmed using EzSet/EQ,
which may be viewed using the Speakers Setup
menu (see Advanced Functions section). Consult
the owner’s guide for your multichannel player
for more information.
6-Channel/8-Channel Direct Input
The 6-/8-Channel Analog Audio Inputs are used
when playing certain multichannel discs, such as
DVD-Audio, HD-DVD, SACD and Blu-ray Discs,
on a player that decodes the audio and outputs
it via its multichannel analog audio outputs but
not via its HDMI output.
C
ontrols and Use of Headphones
Adjust the volume to a comfortable level using
the front panel Volume Control
1
or remote
Volume Up/Down
P
buttons.
To temporarily silence all speaker outputs
p
ress the Mute button
R
o
n the Remote
Control. This will interrupt the output to all
speakers and the headphone jack, but it will not
affect any recording or dubbing that may be in
progress. When the system is muted, the word
MUTE will appear in the Main Information
Display
#
. Press the Mute button
R
again
to return to normal operation.
For private listening, plug the 6.3 mm stereo
phone plug from a pair of stereo headphones
into the front panel Headphone Jack
4
. Note
that when the headphone’s plug is connected,
the word
DOLBY H:DH appears in the Main
Information Display
#
and all speakers will
be silenced. When the headphone plug is
removed, the audio feed to the speakers will be
restored.
When the headphones are in use, you may
take advantage of the Dolby Headphone modes
to bring added spaciousness to headphone lis-
tening. Press the Surround Mode Button on
the front panel
%
to switch between Dolby
Headphone and Bypass to select the one that
you prefer.
Surround Mode Selection
One of the most important features of the
AVR 255/AVR 355 is its ability to reproduce a
full multichannel surround sound field from digi-
tal sources, analog matrix surround encoded
programs and standard stereo or even mono
programs.
Selection of a surround mode is based on per-
sonal taste, as well as the type of program
source material being used. For example, CDs,
motion pictures or TV programs bearing the logo
of one of the major surround-encoding process-
es, such as Dolby Surround should be played in
either the Dolby Pro Logic II or IIx Movie (with
movies) or Music (with music) surround mode,
with any DTS NEO:6 mode or with Harman
Kardon´s exclusive Logic 7 Movie Mode, to cre-
ate a full range 5.1 channel or (with Logic 7 and
DTS NEO:6) even 7.1 channel surround signal
from surround encoded programs, with a stereo-
phonic left and right rear signal, just as it was
recorded
VIDEO TROUBLESHOOTING TIPS:
If a video source is playing and there is no pic-
t
ure:
Check that you have selected the source to
which the video input was assigned.
Check the wires for a loose or incorrect con-
nection.
Check that you have selected the correct
video input on the display device (TV).
Try pressing the Resolution Button on the
front panel to check that the correct video
output resolution is selected and select the
proper resolution for your screen.
Additional tips for systems using HDMI:
Turn off all devices (including the TV, AVR
and any source components).
Unplug the HDMI cables starting with the
cable between the TV and AVR, and contin-
uing with the cables between the AVR and
each source device.
Carefully reconnect the cables from the
source devices to the AVR, and connect the
cable from the AVR to the TV last.
Turn on the devices in this order:TV, then
AVR, then source devices.
ENGLISH
OPERATION 31
31

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Harman-Kardon-AVR255

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Harman Kardon AVR255 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Harman Kardon AVR255 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,83 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Harman Kardon AVR255

Harman Kardon AVR255 Gebruiksaanwijzing - Nederlands - 58 pagina's

Harman Kardon AVR255 Gebruiksaanwijzing - Deutsch - 58 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info