502550
25
Verklein
Vergroot
Pagina terug
1/58
Pagina verder
System Configuration
Number of Speakers
Move the cursor to the Number of Speakers line
and press the SetButton. See Figure 10.
Figure 10 Number of Speakers Menu
The Number of Speakers menu lists each of the
speaker groups.
Program the correct setting for each group: ON
when the speakers are present in the system,
and OFF for positions where no speakers have-
been installed. The Front Left & Right speakers
are always ON and may not be disabled. Any
changes made to the system configuration will
be reflected in the total number speakers dis-
played at the top of the screen.
The setting for the surround back speakers
includes a third option: Zone 2. The AVR 355/
AVR 255 is among the few receivers in its class
that is capable of multizone operation, allowing
placement of a pair of speakers in another room
with listeners in the remote room enjoying either
the same program as in the main room or a dif-
ferent source. The AVR’s assignable surround
back amplifier channels make multizone opera-
tion easier than ever, since an external power
amplifier is no longer required. Simply select the
Zone 2 option at this line, and connect the
Surround Back Speaker Outputs to loudspeakers
located in the remote room.The main room will
be configured automatically for up to 5.1chan-
nels. See the Multizone Operation section for
more information.
The settings in this menu affect a number of
aspects of the AVR’s operation, including the
remainder of the speaker setup process and the
availability of various surround modes at any
time.
When you have finished programming the num-
ber of speakers in the system, select the Back
option to insure the settings are saved correctly.
You may use the Back/Exit Button, and the set-
tings will be saved.
Adjust Crossover Frequencies Menu
After you have programmed the number of
speakers in the system, the AVR will return to
the Manual Speaker Setup menu. Navigate to
the Crossover (Size) line and press the OK
Button to display the Adjust Crossover
Frequencies menu (see Figure 11).
Figure 11 Adjust Crossover Frequencies Menu
The AVR will only display those speaker groups
which you programmed in the Number of
Speakers menu.
Refer back to Step One, where you determined
each speaker’s crossover. Again, for the main
speakers, this is the lowest frequency the speak-
er reproduces well; and for the subwoofer, it’s
the highest.
For each main speaker, select one of the seven
crossover frequencies: 40Hz, 60Hz, 80Hz,
100Hz, 120Hz, 150Hz or 200Hz. If the crossover
frequency you determined in Step One is below
40Hz, select the first option, “Large”. This set-
ting doesn’t refer to the speaker’s physical size,
but to its frequency response, which is also
called full range”. This means the speaker is
capable of playing sounds throughout the fre-
quencyspectrum, from the high pitches to the
bass.
Specify the size of the subwoofer’s transducer as
8, 10, 12 or 15 inches.
Make a note of each speaker group’s crossover
setting in Table A3 inthe appendix.
When you have finished entering the settings,
remember to select Back, not to press the Exit
Button.
Sub Mode
Move the cursor to the Sub Mode line to pro-
gram bass management for the subwoofer. The
subwoofer’s setting depends upon how you pro-
grammed the front left and right speakers.
If you set the front speakers to a numeric
crossover frequency, the subwoofer setting will
be LFE, and you won’t be able to change it.
All low-frequency information will always be
sent to the subwoofer.
If you don’t have a subwoofer, we recommend
t
hat you either upgrade to full-range speakers or
add a subwoofer to your systemat the earliest
opportunity.
If you set the front speakers to LARGE, you
may select from two possible settings for the
subwoofer.
L/R+LFE: This setting sends all low-frequen-
cy information to the subwoofer, including
both information that would normally be
played through the front left and right
speakers and the special low-frequency
effects (LFE) channel information.
LFE: This setting plays low-frequency infor-
mation contained in the left and right pro-
gram channels to the front speakers, and
directs only the LFE channel information to
the subwoofer.
NOTE: The Speaker/Channel Indicators on the
front panel of the receiver (see Figure on page
33) will display the speaker size settings as fol-
lows.
For each speaker configured numerically, a single
box will appear in the position for that speaker.
For each speaker configured as LARGE, a double
box will appear in its position. If a speaker is
configured as OFF, no box will appear. The sub-
woofer will be indicated by a single box, or no
box if no subwoofer has been configured.The
letters inside the boxes appear when a digital
signal is being received that has that channel
discretely encoded. The letters flash when the
signal is not present, such as when a DVD is
paused. A line will connect the SBL and SBR
boxes when a 6.1-channel signal is detected,
indicating that the same signal is playing
through both speakers.
ENGLISH
SYSTEM CONFIGURATION 25
25

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Harman-Kardon-AVR255

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Harman Kardon AVR255 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Harman Kardon AVR255 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,83 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Harman Kardon AVR255

Harman Kardon AVR255 Gebruiksaanwijzing - Nederlands - 58 pagina's

Harman Kardon AVR255 Gebruiksaanwijzing - Deutsch - 58 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info