502541
34
Verklein
Vergroot
Pagina terug
1/76
Pagina verder
34
34
INITIAL SETUP
The Initial Setup section requires that you complete all of the steps
in the Installation section that apply to your receiver. You should have
connected all of your loudspeakers and a video display, as well as your
source devices. You should be able to turn on the receiver and view
a blue screen on
your video display. If necessary, reread the Installation
Section before continuing.
Configure the AVR 347 Using EzSet/EQ
One of the most important and perhaps often overlooked aspects of
setting up a home theater system is to calibrate the receiver to match
the loudspeakers, which enables the AVR to perform at its best.
Until recently, most receivers required the user to perform the calibration
and configuration manually, a somewhat tedious process that called for
a good ear or the purchase of an SPL (sound-pressure level) meter.
Although you may configure the AVR 347 manually, as described in
the Advanced Features section, we recommend that most users take
advantage of our signature EzSet/EQ system.
Before beginning, eliminate extraneous background noise that might
affect the results, such as noisy air conditioning. Try to avoid making
any loud noises while running EzSet/EQ.
IMPORTANT SAFETY NOTE: During the EzSet/EQ procedure,
a series of very loud test tones will be played through all of the
speakers. Avoid sitting or standing close to any one speaker
during the procedure. If you are particularly sensitive to loud
noises, you may wish to leave the room and have someone
else run EzSet/EQ.
Step One – Place the included EzSet/EQ microphone in the listening
position, or in the center of the room, at about the same height as the
listeners’ ears. The microphone features a threaded insert on the bottom
so that it can be mounted on a camera tripod for stability.
Step Two – Plug the EzSet/EQ microphone into the Headphone
Jack/EzSet Microphone Input Jack on the front of the receiver.
See Figure 51.
Figure 51 – Plug EzSet/EQ microphone into receiver.
Step Three Make sure that the AVR 347 and the video display are
turned on. Press the OSD Button to display the Menu System. See
Figure 48. Use the
/
¤
Buttons to move the cursor to the Speaker
Setup tab, and then press the Set Button to select the Speaker Setup
menu. See Figure 52.
Figure 52 – Speaker Setup Menu Screen
Select the Auto Configuration” setting, and the screen shown in Figure
53 will appear to direct you to plug the EzSet/EQ microphone into the
Headphone Jack.
Figure 53 – EzSet/EQ Screen
Step Four – After you select “Continue”, the screen shown in Figure 54
will appear. Although the AVR 347 may be used with up to eight speakers,
you may have elected not to install surround back speakers at this time,
or you may have decided to use the surround back speaker channels to
power speakers in the remote room of a multiroom system. This screen
directs you to program EzSet/EQ for a 5.1- or 7.1-channel configura-
tion. Select the setting that reflects the number of speakers installed in
your system, and EzSet/EQ will do the rest automatically!
Figure 54 – EzSet/EQ: Number of Speakers
NOTE: If you are using fewer than five main speakers in your
system, then it will not be possible to configure your speakers
using EzSet/EQ, and you will need to select Manual Configuration
as described in the Advanced Functions section. If you have
selected a 6.1-channel configuration, using only a single surround
back speaker, it is possible to use a combination of EzSet/EQ
automatic configuration for 5.1 speakers, connect the single
AVR347 om.qxd 7/10/07 11:01 AM Page 34
34

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Harman-Kardon-AVR-347

Zoeken resetten

  • Geachte heer, mevrouw,

    Hoe moet ik, om sacd's af te spelen, mijn Sony dvd/cd/sacd speler aansluiten op mijn Harman Kardon AVR 347? Op de speler zit een digitale coaxiale uitgang en een hdmi uitgang. Gesteld op 23-2-2021 om 14:07

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Harman Kardon AVR 347 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Harman Kardon AVR 347 in de taal/talen: Engels als bijlage per email.

De handleiding is 7,44 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Harman Kardon AVR 347

Harman Kardon AVR 347 Gebruiksaanwijzing - Nederlands - 64 pagina's

Harman Kardon AVR 347 Gebruiksaanwijzing - Deutsch - 64 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info