A Bitstream Indicators
B Optical Source Indicators
C DTS Mode Indicator
D Dolby Digital Indicator
E Coaxial Source Indicators
F Dolby Pro Logic Indicator
G Analog Input Indicator
H Dolby 3 Stereo Indicator
I VMAx Mode Indicator
J 5-Channel Stereo Indicator
K Logic 7 Mode Indicators
L Hall Mode Indicator
M Theater Mode Indicator
N Night Mode Indicator
O Speaker/Channel Input Indicators
P Preset Number/Sleep Timer
Q Preset Indicator
R Sleep Indicator
S Memory Indicator
T Stereo Indicator
U Tuned Indicator
V Auto Indicator
W Main Information Display
X Mute Indicator
A Bitstream Indicators:When the input is a
digital source, one of these indicators will light to
display the specific type of data signal in use.
B Optical Source Indicators: These indica-
tors light to show when an Optical Digital Input
has been selected.
C DTS Mode Indicator: This indicator lights
when a DTS-encoded source is playing.
D Dolby Digital Indicator: This indicator
lights when a Dolby Digital source is playing.
E Coaxial Source Indicators: These indica-
tors light to show when a Coaxial Digital Input
has been selected.
F Dolby Pro Logic Indicator: This indicator
lights when the Dolby Pro Logic mode has been
selected.
NOTE: It is possible to see the Dolby Pro Logic
indicator lit simultaneously with the Dolby
Digital indicator, even though the Dolby Digital
surround mode has been selected. This is due to
the specifications for Dolby Digital processing,
which require that the Dolby Pro Logic mode
apply any time a 2-channel Dolby signal is
detected. If you desire 5.1-channel audio, check
the audio settings in the menus for both your
DVD player and your DVD disc to make sure
that a 5.1-channel Dolby Digital soundtrack has
been selected.
G Analog Input Indicator: This indicator
lights when an analog input source has been
selected.
H Dolby 3 Stereo Indicator: This indicator
lights when the Dolby 3 Stereo Mode has been
selected.
I VMAx Mode Indicator: This indicator
lights when the VMAx mode is in use. VMAx F
appears when the Far Field VMAx mode is
selected;
VMAx N appears when the Near
Field VMAx mode is selected. (See page 22 for
a description of the VMAx modes.)
J 5-Channel Stereo Indicator: This indica-
tor lights when the 5-Channel Stereo mode has
been selected.
K Logic 7 Mode Indicators: These indica-
tors light when the Logic 7 mode is in use.
LOGIC 7C appears for the Cinema version
of Logic 7;
LOGIC 7M appears for the
Music version of Logic 7. (See page 22 for a
description of the Logic 7 modes.)
L Hall Mode Indicator: This indicator lights
when the Hall mode has been selected.
M Theater Mode Indicator: This indicator
lights to show that the Theater mode has been
selected.
N Night Mode Indicator: This indicator
lights when the AVR 110 is in the Night mode,
which preserves the dynamic range of digital
program material at low volume levels.
O Speaker/Channel Input Indicators: These
indicators are multipurpose, indicating either the
speaker type selected for each channel or the
incoming data-signal configuration.The left,
center, right, right surround and left surround
speaker indicators are composed of three boxes,
while the subwoofer is a single box.The center
box lights when a “Small” speaker is selected,
and all three boxes light when “Large” speakers
are selected.When none of the boxes are lit for
the center, surround or subwoofer channels, no
speaker has been selected for one of those posi-
tions. (See page 17 for more information on con-
figuring speakers.) The letters inside each of the
center boxes display active input channels. For
standard analog inputs, only the L and R will
light, indicating a stereo input.When a digital
source is playing, the indicators will light to dis-
play the channels being received at the digital
input.When the letters flash, the digital input
has been interrupted. (See page 18 for more
information on the Channel Indicators.)
P Preset Number/Sleep Timer: When the
tuner is in use, these numbers indicate the spe-
cific preset memory location in use. (See page
25 for more information on preset stations.)
When the Sleep function is in use, these num-
bers show how many minutes remain before
the unit goes into the Standby mode.
