807626
3
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
- 3 -
Operation
Start
A Stand-alone mode:
By pressing start once the “+ and –“ buttons can be used to set the time. Pressing for a second time will start the unit.
Coin mode:
The unit can be started automatically by the external timer or the coin automat. The start button can be used only when the unit
has to be restarted from “pause.
Stop
Stand-alone mode:
B Pressing stop once will cause the unit to “pause. The lights will go out but the ventilation will continue to run.
Pressing stop twice will initiate a mandatory after-cooling phase of 3 minutes. The unit cannot be started during these 3 minutes.
Coin mode:
Pressing stop once will cause the unit to “pause. The lights will go out but the ventilation will continue to run.
The unit will not respond to pressing stop several times. The external timer or coin automat will switch the unit o.
Switching o will initiate a mandatory after-cooling phase of 3 minutes. The unit cannot be started during these 3 minutes.
Illustration after-cooling
C Stand-alone mode:
a. Reduce sessiontime
b. Reduce body cooler speed
Coin mode:
a. Reduce body cooler speed
Stand-alone mode:
D a. Increase sessiontime
b. Increase body cooler speed
Coin mode:
a. Increase body cooler speed
No function
E
Fan
F Switch the body cooler on and o
General
The unit is generally set for use without external timer (stand-alone mode) or coin automat. When the unit has to operate in combination with
an external timer or a coin automat (coin mode), the internal time should be set to 0 minutes as per procedure below.
press continuously for 10 seconds
after 10 seconds press the “-“ button and continue to press until the display indicates “00”
press once and the unit will bleep in response.
Note: - The maximum session is restricted to 30 minutes.
- Note: Before the end of the session, the unit will give a series of bleeps to alert you.
Display messages
Overrule error (Switch print and/or display print defect)
Filter glass defect (Filter glass of the face tanner is broken or glass protection is defective)
Communication error (No communication between switch print and display print)
Note: When you receive one of the above error messages on your display, you should stop using the unit and remove the plug from the socket.
Contact your dealer.
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Hapro Seecret C200 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Hapro Seecret C200 in de taal/talen: Nederlands, Duits, Engels, Frans, Spaans als bijlage per email.

De handleiding is 1.39 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info