723725
10
Verklein
Vergroot
Pagina terug
1/19
Pagina verder
6
4. Before getting started
Getting started with the remote control
Open the battery compartment cover.Itis located on the
rear of the remote control and can be opened by sliding it
in the direction indicated.
TwoAAA batteries areincluded in the delivery,they should
be inserted in the battery compartment of the remote
control. Observe the correct polarity when inserting
batteries. The polarity (+ /-)is indicated in the battery
compartment.
5. Getting started
Warning
Connect the product only to asocket that has been
approved for the device. The socket must be installed
close to the product and must be easily accessible.
Disconnect the product from the power supply using
the on/off switch –ifthis is not available, unplug the
power cordfromthe socket.
When using amult-socket power strip, make sure
that the sum power draw of all the connected devices
does not exceed its maximum throughput rating.
If you will not be using the product for along period
of time, disconnect it from mains power.
Turning on the product
Connect the power cables of the soundbar and the
subwoofer to properly installed power sockets.
Press [POWER](1) to switch on the soundbar.
Alternatively,press the [POWER]button (1) on the
remote control.
Note –Turning on for the rst time
In the as-shipped state, the soundbar and subwoofer
arealready paired.
When switched on for the rst time, the soundbar is
in ‘First-time setup of device’ mode as soon as the
network status LED (5) pulsates.
If the Setup mode is not active, brieypress the
[WIFI SETUP]button (5) on the back of the device
to activate the WPS mode. The status LED begins to
ash.
Alternatively,press and hold the [WIFI SETUP]button
for about 7seconds to open an Access Point. The
status LED begins to pulsate.
6. Setting up the soundbar
Note
To be able to use the product’sfull range of functions,
you must additionally download the Amazon Alexa
app and create an Amazon account. Forthis purpose,
follow the instructions in the Amazon Alexa app.
Further information can be found at www.amazon.
co.uk
Make surethat your terminal device has the necessary
ports for connection to the soundbar.Please refer to
the operating instructions for the terminal device you
areusing.
6.1. Downloading the Hama Smart Audio app
Note
The following operating systems aresupported:
iOS 8orhigher
Android 4.4.2 or higher
Open the iTunes App StoreorGoogle Play Storeonyour
smartphone.
Use the search function to nd the app.
Download the app in the usual way and install it on your
smartphone. To do this, follow the instructions on your
smartphone.
6.2. First-time setup of the device with the Hama
Smart Audio app (ALEXA function)
Note –WLAN (wireless network)
Ensurethat the router is switched on, is functioning
correctly and that thereisaconnection to the internet.
Activate the WLAN function of your router.
Note
Please note that the SIRIUM4000ABT does not support
5-GHz networks. Youshould thereforeenable a2.4-GHz
WLAN connection in the conguration interface of your
router/access point.
Followyour router´s operating instructions as regards the
correct functioning of the WLAN connection.
Make surethat the soundbar is in WLAN pairing mode.
The network status LED (5) pulsates.
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Hama SIRIUM4000ABT - Soundbar bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Hama SIRIUM4000ABT - Soundbar in de taal/talen: Engels als bijlage per email.

De handleiding is 0,4 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Hama SIRIUM4000ABT - Soundbar

Hama SIRIUM4000ABT - Soundbar Gebruiksaanwijzing - Nederlands - 19 pagina's

Hama SIRIUM4000ABT - Soundbar Gebruiksaanwijzing - Deutsch - 21 pagina's

Hama SIRIUM4000ABT - Soundbar Gebruiksaanwijzing - Français - 19 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info