723748
12
Verklein
Vergroot
Pagina terug
1/19
Pagina verder
6
4.1 Antenna connection / alternative solutions
(Figure D)
Note
To optimise reception, the glass adhesive antenna
should be tted such that it is in contact with the
vehicle body.
If your vehicle’s A pillar is covered with fabric or other
insulating material, t the metal foil there anyway.
Consult a local car workshop regarding the antenna’s
contact with the vehicle body.
Fit the antenna at the edge of the windscreen (preferably
on the passenger side) and connect the metal foil to your
vehicle’s A pillar.
Then connect the SMB connector of the antenna cable to
the antenna input (14) of the adapter.
Note
The included glass adhesive antenna can be replaced
by an alternative antenna solution.
The existing vehicle antenna can continue to be used
with an adapter.
Consult a car workshop or visit www.hama.comfor
suitable accessories.
4.2 Mounting
Warning Risk of injury
Take care that components such as airbags, safety
areas, controls, instruments, etc. and visibility are not
blocked or restricted.
Do not allow yourself to be distracted by the product,
for example when driving a vehicle or operating sports
equipment. Always pay attention to the surrounding
trac and your environment.
Note
Before mounting the holder, check the installation
options in your vehicle. If in doubt, consult the manual
for your vehicle or contact the manufacturer.
Strictly avoid using undue force when using the
product or during installation.
A) Mounting to ventilation grille
Fit the mounting adapter for ventilation apertures to the
back of the product. (Figure A)
Now insert the device into the ventilation grille.
The peg for the mount in the ventilation grille can be
turned 360° so that you can adjust alignment.
B) Mounting using the adhesive pad
Note Mounting surface
Please note that the selected mounting surface (e.g.
dashboard) should be free of dust and grease. Use a
suitable cleaning agent from a specialised dealer to
clean the surface.
Fit the mounting adapter with the adhesive pad to the
back of the product (Figure B).
Clean the surface to which the adhesive pad is to be
axed.
Now remove the protective lm from the adhesive pad
and mount the adapter on the chosen surface.
4.3 Connection
Note
Only use original accessories (or accessories approved
by Hama), to prevent damage to the product.
Connect the supplied USB charging cable to the USB port
(16) of the device.
Connect the unused plug on the USB cable to a 12 V
socket of your vehicle.
4.4 Switching on / Standby / Initial setup
Switching on the product
Press and hold [
](2) for about 3 seconds to switch on
the device.
Switching off the product
Press and hold [
] (2) for about 3 seconds to activate
the standby mode.
Note
To switch off the radio completely, disconnect it from the
power supply.
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Hama CDR70BT bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Hama CDR70BT in de taal/talen: Engels als bijlage per email.

De handleiding is 0,81 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Hama CDR70BT

Hama CDR70BT Gebruiksaanwijzing - Deutsch - 19 pagina's

Hama CDR70BT Gebruiksaanwijzing - Français - 19 pagina's

Hama CDR70BT Gebruiksaanwijzing - Alle talen - 84 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info