Handleiding Hama 11412 - 4 in 1 (pagina 3 van 44) (Alle talen)

607792

Verklein

Vergroot

Pagina terug

1/44

Pagina verder

5.2.3 Select the device you want to control using

the device key (e.g. TV). A successful selection

is indicated by the LED with one ash follo-

wed by permanent light.

5.2.4 Press the “POWER” or the PROG+/PROG- key

to zap through the preloaded codes until the

device you want to control reacts.

5.2.5 Press MUTE(OK) to save the code and exit the

code search. The LED indicator turns off.

Note

►

Internal

memory

limitations

low

only

350

most

common

device

codes

loaded.

the

extensive

umber

differ

ent available A/V devices on the mar-

ket, it may be possible that only the most

common main functions are available. If so,

repeat steps 5.2.1 to 5.2.5 to nd a more

compatible code. No code may be available

for some special device models.

5.3 Auto Code Search

Auto Code Search uses the same preloaded codes

as the Manual Code Search (5.2) but your Universal

Remote Control scanns through the codes automa-

tically until the device you want to control shows

a reaction. This might be that the device you want

to control switches off (POWER key) or changes the

channel (P+/P- keys).

5.3.1 Turn on the device you want to control

5.3.2 Press the SETUP key until the LED indicator is

permanently lit.

5.3.3 Select the device you want to control using

the device key (e.g. TV). A successful selection

is indicated by the LED with one ash follo-

wed by permanent light.

5.3.4 Press the PROG+/PROG- keys or POWER to

start the Auto Code Search. The LED indicator

ashes once followed by permanent light.

The Universal Remote Control has a latency of

6 seconds before the rst scan starts.

Note: Scan Speed Settings

► Scan Speed Settings can be set at either 1 or

3 seconds. The default setting for the scan

time per single code is 1 sec. If this feels un-

comfortable , you can switch to 3 sec. scan

time per single code. To switch between the

scan times, press PROG+ or PROG- during

the 6 sec. latency before Auto Code Search

starts scanning.

5.3.5 The LED indicator conrms each single code

scan with a single ash.

5.3.6 Press MUTE(OK) to save the code and exit the

code search. The LED indicator turns off.

5.3.7 To stop the Auto Code Search during the scan

process, press the EXIT key.

Note

► When all codes are searched without suc-

cess, the Universal Remoote Control exits

Auto Code Search and returns to operational

mode automatically. Currently stored code

is not changed.

5.4 Code Identification

The Code identication offers you the possibility, to

determine an already entered code.

5.4.1 Press the SETUP key until the LED indicator is

permanently lit.

5.4.2 Select the device you want to control using

the device key (e.g. TV). A successful selection

is indicated by the LED with one ash follo-

wed by permanent light.

5.4.3 Press SETUP key. The LED indicator ashes

once followed by permanent light.

5.4.4 To nd the rst digit, press the numeric keys

from 0 to 9. The LED indicator ashes once

to indicate the rst digit of the 4-digit code

number.

5.4.5 Repeat step 5.4.4 for the second, third and

fourth digit.

CODES

TV VCR SATDVD

AUX AMP CBL DVBT

6. Special Functions

6.1 Punch Through Channel

The Punch Through Channel allows the PROG+ or

PROG- commands to bypass the currently controlled

device and switch the channels on a second device.

All other commands remain uninuenced.

To activate the punch through channel setting:

•Press desired device mode key (e.g. TV).

•Press and hold “PROG+” key.

•Press desired device mode key (e.g. SAT).

•Release “PROG+” (the indicator ashes once if

the setting is activated).

To deactivate the punch through channel setting:

•Press desired device mode key (e.g. TV).

•Press and hold “PROG-” key.

•Press desired device mode key (e.g. SAT).

•Release “PROG-” (the indicator is ashing twice

if the setting is deactivated).

6.2 Punch Through Volume

The Punch Through Volume allows the VOL+ or

VOL- commands to bypass the currently controlled

device and adjust the volume on a second device.

All other commands remain uninuenced.

To activate the punch through volume setting:

•Press desired device mode key (e.g. TV).

•Press and hold “VOL+” key.

•Press desired device mode key (e.g. SAT).

•Release “VOL+” (the indicator ashes once if

the setting is activated).

To deactivate the punch through volume setting:

•Press desired device mode key (e.g. TV).

•Press and hold “VOL-” key.

•Press desired device mode key (e.g. SAT).

•Release “VOL-” (the indicator is ashing twice if

the setting is deactivated).

6.3 Macro Power

Macro Power enables you to turn two A/V devices

on/off simultaneously.

To activate the macro power setting:

•Press desired device mode key (e.g. TV).

•Press and hold “POWER” key.

•Press desired device mode key (e.g. SAT).

•Release “POWER” (the indicator ashes once if

the setting is activated).

To deactivate the macro power setting:

•Press desired device mode key (e.g. TV).

•Press and hold “POWER” key.

•Press desired device mode key (e.g. SAT).

•Release “POWER” (the indicator is ashing

twice if the setting is deactivated).

7. Maintenance

• Do not mix new and used batteries for

powering the Universal Remote Control, as old

batteries tend to leak and may cause power

drain.

• Do not use corrosive or abrasive cleansers on

your Universal Remote Control.

• Keep the Universal Remote Control dust free by

wiping it with a soft, dry cloth.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Hama 11412 - 4 in 1 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info