791079
14
Verklein
Vergroot
Pagina terug
1/26
Pagina verder
14
00176566
Status light
Reset
Speaker
Micro USB
Microphone
SD card slot
4.6.1 Product features
Status LED is constantly lit red: Preparing for pairing
mode
Status LED flashes red: Pairing mode active (device can
be connected)
Status LED flashes blue: QR code was recognised
Status LED is constantly lit blue: Connection set up
successfully
Note
Protect the product from dirt, moisture and
overheating, and only use it in a dry environment.
Connect the product only to a socket that has been
approved for the device. The socket must be installed
close to the product and must be easily accessible.
Do not attempt to service or repair the product yourself.
Leave any and all service work to qualified experts.
Do not continue to operate the device if it becomes
visibly damaged.
The product is intended for indoor use only.
Keep this product, as all electrical products, out of the
reach of children!
4.6.2 Installation
You can attach the camera using adhesive pads.
Power can be supplied to the camera only via USB.
For USB operation, connect a Micro-USB cable (included
in delivery) to the Micro-USB port and to a suitable USB
power supply (included in delivery). Plug the power
supply unit into a socket. Connect the product only to a
socket that is approved for the device. The socket must
be installed close to the product and must be easily
accessible. When powering the device using a USB
power supply, make sure there are no batteries inside
the device.
Warning - Installation with adhesive pad
All parts are intended for indoor use only. Do not
install them outdoors.
Please note that the installation surface you choose
should be free of dust and grease. Use a suitable clean-
ing agent from a specialised dealer to clean the surface.
Note that the adhesive pad attachment is permanent.
To remove the adhesive pad, carefully pull it off the
installation surface.
Various environmental factors such as ambient
humidity, sunlight or cold can impair the durability of
the adhesive pad.
We cannot guarantee that residue will not be left on the
mounting surface after the adhesive pad is removed.
4.6.3 Integrating devices into the Hama Smart
Solution app
Connect the WiFi camera to the USB cable supplied and
the power supply unit. Plug the power supply unit into
a socket.
Wait a moment until the camera emits a signal tone and
the LED begins to flash red.
Open the app and tap My home at the lower-left edge
of the screen.
Then tap + at the upper-right edge of the screen, select
the ‘Cameras’’.
Tap OK to confirm that the camera is flashing.
Then enter the name of your WiFi network and the
password. Tap OK to confirm your entries.
Now scan the QR code with the camera. Tap ‘I heard
the beep’ to confirm that you heard a signal tone. The
camera will now be connected.
14

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Hama 00176558 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Hama 00176558 in de taal/talen: Engels als bijlage per email.

De handleiding is 2.15 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Hama 00176558

Hama 00176558 Gebruiksaanwijzing - Deutsch - 26 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info