817728
9
Verklein
Vergroot
Pagina terug
1/83
Pagina verder
EN 16
EN 17
Oven care and cleaning
Replacing the oven lamp
H2O CAVITY CLEAN
This function performs a cleaning cycle by in-
jecting steam into the cavity for 15 minutes.
At the end of the cycle, any crusting that may
have formed due to high-temperature cooking
inside the oven cavity, will be softened and be-
come much easier to remove.
H20 CIRCUIT CLEAN
This function performs a cleaning cycle of the
circuit, to keep it clean and ecient over time.
WATER DISCHARGE
At the end of each steam cooking and after all
the cleaning processes, it is recommended to
discharge residual water.
By pressing the On/O button, before going to
stand by mode, follow the instructions on the
screen to proceed with the water discharge.
1. Remove the tank until signed area
2. Wait for discharge
3. Empty the tank
IMPORTANT: The oven lamp must have pre-
cise characteristics:
Structure suitable for high temperatures
(up to 300 °C);
Power supply: see the V/Hz value on the se-
rial number plate;
Power 25 W;
Type G9 connector.
ATTENTION: Make sure the appliance is o
before replacing the lamp to avoid the possibil-
ity of electric shock.
To avoid damage, spread a tea towel for
pots and pans inside the oven;
Remove the screws holding the steel frame;
Remove the old lamp by sliding it out of its
seat and taking care not to break it;
Insert the new bulb taking care not to touch
it with your hands (we recommend using a
disposable latex glove);
Replace the stainless steel frame taking
care not to pinch the silicone gasket seal;
Screw in the stainless steel screws you pre-
viously removed;
Connect the appliance to the power line.
For the installer
INSTALL THE OVEN IN THE COUNTER
The oven must be installed under a cook
top, in a column, or combined with the rel-
ative food-warmer drawer.
The dimensions of the space must be those
shown in gure.
The cabinet material must be able to with-
stand the heat.
The oven must be centred within the walls
of the cabinet and xed with the screws and
bushings that are provided.
EN 16
EN 17
Oven care and cleaning
Replacing the oven lamp
H2O CAVITY CLEAN
This function performs a cleaning cycle by in-
jecting steam into the cavity for 15 minutes.
At the end of the cycle, any crusting that may
have formed due to high-temperature cooking
inside the oven cavity, will be softened and be-
come much easier to remove.
H20 CIRCUIT CLEAN
This function performs a cleaning cycle of the
circuit, to keep it clean and ecient over time.
WATER DISCHARGE
At the end of each steam cooking and after all
the cleaning processes, it is recommended to
discharge residual water.
By pressing the On/Obutton, before going to
stand by mode, follow the instructions on the
screen to proceed with the water discharge.
1. Remove the tank until signed area
2. Wait for discharge
3. Empty the tank
IMPORTANT: The oven lamp must have pre-
cise characteristics:
Structure suitable for high temperatures
(up to 300 °C);
Power supply: see the V/Hz value on the se-
rial number plate;
Power 25 W;
Type G9 connector.
ATTENTION: Make sure the appliance is o
before replacing the lamp to avoid the possibil-
ity of electric shock.
To avoid damage, spread a tea towel for
pots and pans inside the oven;
Remove the screws holding the steel frame;
Remove the old lamp by sliding it out of its
seat and taking care not to break it;
Insert the new bulb taking care not to touch
it with your hands (we recommend using a
disposable latex glove);
Replace the stainless steel frame taking
care not to pinch the silicone gasket seal;
Screw in the stainless steel screws you pre-
viously removed;
Connect the appliance to the power line.
For the installer
INSTALL THE OVEN IN THE COUNTER
The oven must be installed under a cook
top, in a column, or combined with the rel-
ative food-warmer drawer.
The dimensions of the space must be those
shown in gure.
The cabinet material must be able to with-
stand the heat.
The oven must be centred within the walls
of the cabinet and xed with the screws and
bushings that are provided.
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Haier HWO45NM6OXB2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Haier HWO45NM6OXB2 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools als bijlage per email.

De handleiding is 4.55 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info