Handleiding Haier HD90-A3S979 (pagina 7 van 32) (Engels)

817661

Verklein

Vergroot

Pagina terug

1/32

Pagina verder

HD90-A2979

HD100-A2979

HD80-A3979

HD90-A3979

HD90-A3979S

HD90-A3S979

User manual

Heat-Pump-Dryer

Thank you EN

Disposal

Help protect the environment and human health. Put

the packaging in applicable containers to recycle it.

Help to recycle waste of electrical and electronic ap-

pliances. Do not dispose appliances marked with this

symbol with the household waste. Return the product

to your local recycling facility or contact your municipal

oﬃ ce.

WARNING!

Risk of injury or suﬀ ocation!

Disconnect the appliance from the mains supply. Cut oﬀ the mains cable and dispose

of it. Remove the door catch to prevent children and pets to get closed in the appliance.

WARNING!

The appliance must not be supplied through an external switching device, such as a

timer, or connected to a circuit that is regularly switched on and oﬀ by a utility.

Legend

Warning! – Important safety information

General information and tips

Environmental information

Thank you for purchasing a Haier Product.

Please read these instructions carefully before using this appliance. The instructions con-

tain important information which will help you get the best out of the appliance and ensure

safe and proper installation, use and maintenance.

Keep this manual in a convenient place so you can always refer to it for the safe and proper

use of the appliance.

If you sell the appliance, give it away, or leave it behind when you move house, make sure

you also pass this manual so that the new owner can become familiar with the appliance

and safety warnings.

EN Content

Safety information ................................................................................................................................. 4

Intended use ............................................................................................................................................7

Product description ............................................................................................................................... 8

Control panel ...........................................................................................................................................9

Programmes..........................................................................................................................................12

Consumption ........................................................................................................................................13

Suggestions and tips ...........................................................................................................................14

Daily use ..................................................................................................................................................16

Care and cleaning ................................................................................................................................. 20

Troubleshooting ...................................................................................................................................22

Installation ..............................................................................................................................................24

Technical data .......................................................................................................................................26

Customer Service ................................................................................................................................30

1-Safety information

WARNING!

Before ﬁ rst use

▶Make sure there is no transport damage.

▶Remove all packaging and keep out of children´s reach.

▶Handle the appliance always with at least two persons because it

is heavy.

Daily use

▶This appliance can be used by children aged from 8 years and

above and persons with reduced physical, sensory or mental ca-

pabilities or lack of experience and knowledge if they have been

given supervision or instruction concerning use of the appliance

in a safe way and understand the hazards involved.

▶Keep away children under 3 years of age from the appliance un-

less they are constantly supervised.

▶Children shall not play with the appliance.

▶Do make sure the room is dry and well ventilated. The ambient

temperature should be between 5 °C and 35 °C.

▶Do not cover any ventilation openings in the base by a carpet or

similar object.

▶Keep the area around the tumble dryer free of dust and lint.

▶Do make sure that there is only laundry inside the appliance and

no pets or children before you use it.

▶Only touch the mains plug with dry hands and do not touch or

use the appliance if you are barefoot or have wet or damp hands

or feet.

▶Only dry textiles washed in water.

▶Do make sure not to load more than nominal load.

▶Remove all items such as lighters and matches from pockets.

▶Use fabric softeners or similar products as speciﬁ ed by the

manufacturer´s packaging.

▶Do not use ore store any ﬂammable sprays or ﬂ ammable gas in

close vicinity to the appliance.

▶Do not place heavy objects or sources of heat or damp on top of

the appliance.

▶Hold the plug, not the cable, when unplugging the appliance.

▶Do not touch the rear wall and the drum during operation; they

are hot.

EN 1-Safety information

WARNING!

Daily use

▶Do not dry following items in the appliance:

▶Items which are unwashed.

▶Items which have been contaminated with inﬂammable sub-

stances such as cooking oil, acetone, alcohol, benzine, petrol,

kerosene, spot removers, turpentine, waxes, wax removers

or other chemicals. The fumes can cause a ﬁ re or explosion.

These items must always be washed ﬁ rst by hand in hot wa-

ter with an extra amount of detergent and then be dried in the

open air before drying in the appliance.

▶Items which contain padding or ﬁllings (e.g. pillows, jackets), as

the ﬁlling can get out with the risk of igniting in the dryer.

▶Items which contain a large proportion of rubber, foam rubber

(latex foam) or rubber like materials such as shower caps, wa-

terproof textiles, rubberised articles and items of clothing and

pillows with foam rubber ﬁlling.

▶Do not drink the condensed water.

▶Do not use the appliance without the lint ﬁlter or condenser ﬁ lter

in place or with damaged ﬁlter.

▶Notice that the last part of the drying cycle occurs without heat

(cool down cycle) to ensure remaining the garments at a temper-

ature which does not damage them.

▶Do not leave the appliance unattended during run time for some

time. If a long absence is intended, the drying cycle have to be

interrupted by switching oﬀ the unit and unplugging the mains.

▶Do not switch oﬀ the appliance except drying cycle is ﬁnished,

unless all items are quickly removed and spread out that the heat

can be released.

▶Switch oﬀ the appliance after each drying programme to save

electricity and for safety.

Maintenance / cleaning

▶Make sure children are supervised if they carry out cleaning and

maintenance.

▶Disconnect the appliance from the electrical supply before un-

dertaking any routine maintenance.

1-Safety information

WARNING!

Maintenance / cleaning

▶Clean the lint ﬁlter and the condenser ﬁ lter after each pro-

gramme (see CARE AND CLEANING).

▶Do not use water spray or steam to clean the appliance.

▶Do not use industrial chemicals to clean the appliance.

▶Replace a damaged supply cord only by the manufacturer, its ser-

vice agent or similarly qualiﬁ ed persons in order to avoid a hazard.

▶Do not try to repair the appliance by yourself. In case of repair

please contact our customer service.

Installation

▶Ensure a location which allows opening the door fully. Do not in-

stall the tumble dryer behind a lockable door, a sliding door or a

door with hinges on the opposite side of the tumble dryer door

as this limits the full opening of the tumble dryer door.

▶Install the appliance in a well-ventilated, dry place.

▶Never install the appliance outdoors in a damp place, or in an area

which may be prone to water leaks such as under or near a sink

unit. In the event of a water leak cut power supply and allow the

machine to dry naturally.

▶Install or use the appliance only where the temperature is above

5 °C.

▶Do not place the appliance directly on a carpet, or close to a wall

or furniture.

▶Do not expose the appliance to any frost, heat or direct sunlight

or in the near of heat sources(e.g. stoves, heaters).

▶Make sure that the electrical information on the rating plate

agrees with the power supply. If it does not, contact an electri-

cian.

▶Do not use multi-plug adapters and extension cables.

▶Make sure not to damage the electric cable and the plug. If dam-

aged have it replaced by an electrician.

▶Use a separate earthed socket for the power supply which is easy

accessible after installation. The appliance must be earthed.

▶Only for UK: The appliance’s power cable is ﬁ tted with 3-cord

(grounding) plug that ﬁ ts a standard 3-cord (grounded) socket.

Never cut oﬀ or dismount the third pin (grounding). After the ap-

pliance is installed, the plug should be accessible.

EN 2-Intended use

Notice

The appliance contains the ﬂ uorinated greenhouse gas HFKW-134a (GWP:1430). This

gas is hermetically sealed.

Intended use

This appliance is intended for drying items which have been washed in a water solution and

are marked on the manufacturer‘s care label as being suitable for tumble drying.

It is designed exclusively for domestic use inside the house. It is not intended for commer-

cial or industrial use. Changes or modiﬁ cations to the device are not allowed. Unintended

use may cause hazards and loss of of all warranty and liability claims.

Standards and directives

This product meets the requirements of all applicable EC directives with the correspond-

ing harmonised standards, which provide for CE marking.

Environmentally responsible use

▶Thorough drainage: Spin the laundry with the maximum spin speed.

▶Maximum load: Use the maximum ﬁ lling amount according to the programme table,

but do not overload the dryer. To take advantage of the maximum load, the laundry

which should be dried „READY to STORE“, can be ﬁ rst dried easily with „READY to

IRON“. At the programme end remove the laundry which should be ironed and dry the

remaining laundry then to end.

▶Loosen up the laundry: Shake out the laundry before putting them into the dryer.

▶Avoid excess drying: An excessive drying should be avoided. Select the right pro-

gramme and the appropriate dry level.

▶Softener unnecessary: Do not use softener when washing, because the laundry will

become ﬂ uﬀ y and soft in the dryer .

▶Cleaning of the lint ﬁ lters: Clean the lint ﬁ lters after each cycle.

▶Ventilation: Make sure the appliance is properly ventilated (see INSTALLATION).

▶Condensed water reuse: The collected condensed water can be used for the steam

iron. Before it should be poured through a ﬁ ne sieve or coﬀ ee ﬁ lter paper. Smallest

parts will be retained by the ﬁ lter.

3-Product description

DryL evel

Delay

Wrinkle Free

Temp.

Childlock i-Refr es h

+++

i-REFRESH

11 English |

CONTROL PANEL

5Filters must be cleaned regularly.

See Lint Filter Cleaning or Condenser

Filter Cleaning section of the manual.

Clean filter

indicator

2Childlock indicator To activate the Child-lock function after a cycle

has been started, press the Childlock button

for 3 sec. until the indicator icon lights up.

To deactivate press the button for 3 sec. again.

Note: When the cycle ends or the power

supply is interrupted, the function will not be

cancelled automatically.

Note: After each cycle, indicator will flash to

remind cleaning the filters.

DryL evel

Delay

Wrinkle Fre e

Temp.

Babyca re Quick Dry

Mix

Cotton

Duvet

Synthetics T owel Warm Up

Shirt

Wool Time r

BulkyDelicate Sports

Childlock i-Refresh

i-REFRESH

Delay function for delay start, press the button to

set time (in 1 intervals up to 12 hours).

The appliance shoule be finished in, afterwards

press to start the delayed operation.

1 Delay button

3Timer indicator When choose the timer program, It will lights up.

Signal indicator You can choose signal as you need. To active

the signal function after switching on the dryer,

press and Temp. for about 3 seconds

until the beep sounds.To deactivate press both

buttons for 3 seconds again until the beep sounds.

Note: This function should be set after you

have finished all the options, otherwise when

you turn the knob or press the button, the

function will be delected automatically.

1 3

3.1 Picture of appliance

Front (Fig. 3-1): Rear side (Fig. 3-2):

Note:

Due to technical changes and diﬀ erent models, the illustrations in the following chap-

ters may diﬀ er from your model.

3.3

1 Water tank

2 Tumble dryer door

3 Control panel

4 Power supply cord

5 Back plate

6 Drainage outlet

7 Adjustable feet

User manual

Warranty card

Drain hose Energy labelDrying rack

( Only for

HD100-A2979 /

HD90-A3S979

model)

3.2 Accessories

Check the accessories and literature in accordance with this list (Fig.:3-3):

3-1 3-23-2

3-3

EN 4-Control panel

4.1 Delay button

Delay function for delay start, press the button to set time (in

1 intervals up to 12 hours).The appliance should be ﬁ nished

in, afterwards press to start (Fig. 4-2) the delayed operation.

1 Delay button

2 Child-lock indicator

3 Timer indicator

4 Signal indicator

5 Clean ﬁ lter indicator

6 Time button

7 Temp. button

8 Start/Pause button

9 Program knob

10 Power button

11 Dry level button

12 Childlock button

13 Empty tank indicator

14 Display

15 Door unlock indicator

16 Wrinkle Free button

17 i-Refresh

Dry Le vel

Delay

Wrinkle F ree

Temp.

Ba byc are Quick Dry

Mix

Cotton

Duvet

Synthetic s T owe l Wa rm Up

Shirt

Wool Timer

Bu lkyDelic a te Sp orts

9A++

Childl oc k i-Re fr es h

9++

i-REFRESH

910

11 12

4.2 Child lock indicator

To activate the Child-lock function after a cycle has been start-

ed, press the Childlock button (Fig. 4-3) for 3 sec. until the in-

dicator icon lights up. To deactivate press the button for 3 sec.

again.

4.3 Timer indicator

When choose the timer program (Fig. 4-4), It will lights up.

4.4 Signal indicator

You can choose signal as you need. To active the signal

function after switching on the dryer, press and Temp.

(Fig. 4-5) for about 3 seconds until the beep sounds.To de-

activate press both buttons for 3 seconds again until the

beep sounds.

Notice

This function should be set after you have ﬁ nished all the options, otherwise when you

turn the knob or press the button, the function will be delected automatically.

Notice

When the cycle ends or the power supply is interrupted, the function will not be

cancelled automatically.

Wrinkle Free

Temp.

i-Re fres h

Temp.

Childlock

Delay

4-1

4-2

4-3

4-4

4-5

4-Control panel

4.8 Start/Pause button

Press Start/Pause (Fig. 4-9) to Start a drying cycle. Press

button again to pause the drying cycle – indicator light is

ﬂ ashing. Press button again to continue.

4.6 Time button

When select the Timer or Delay program, then the light

of is on. Press this button to add or substract the

time.

4.7 Temp. button

Press the button (Fig. 4-8) to set the drying tempera-

ture for some programs. The display is shown below:

High temperature.

Middle temperature.

Low temperature.

Cool air.

Notice

After each cycle, indicator will ﬂ ash to remind cleaning the ﬁ lters.

4.5 Clean ﬁ lter indicator

Filters must be cleaned regularly. See Lint Filter Clean-

ing or Condenser Filter Cleaning section of the manual.

4.9 Program knob

Select one of the 12 programs using the knob (Fig.

4-10). The indictor of the respective program lights up.

See Program Modes section of the manual for further

information.

4.10 Power button

Press Power button (Fig. 4-11) to switch on/oﬀ the

tumble dryer.

4.11 Dry Level button

Press the button (Fig. 4-12) to set the ﬁ nal moisture

content of the laundry at the end of cycle.

Extra dry

Ready to store

Ready to iron

Temp.

CONTROL PANEL

Dry Level

Delay

Wrinkle Free

Temp.

Babyc are Quic k Dry

Mix

Cotton

Duvet

Synthetics T owel Wa rm Up

Shirt

Wool Timer

B ulkyDelic a te Sp orts

Childl oc k i-Re fr es h

i-REFRESH

4-6

4-7

4-8

4-9

4-11

4-10

Dry Level

4-12

EN 4-Control panel

Notice

The remaining time is a default value, this time will be re-calculated depending on

additional program settings and the moisture content of the laundry.

Notice

The default time is 1 hour.

4.12 Childlock button

To activate the Child-lock function after a cycle has been

started, press the button (Fig. 4-13) for 3 sec. until the in-

dicator icon lights up. To deactivate press the button for

3 sec. again.

4.13 Empty tank indicator

Water tank must be emptied.

Important: Empty the water tank after each drying cycle.

See Empty the water tank section of the manual.

4.14 Display

The display shows the remaining time, the delay time and

other related information.

4.15 Door unlock indicator

If the door open, this indicator (Fig. 4-16) will light up..

4.16 Wrinkle Free button

After selecting the program with this function, the icon

lights up, anti-wrinkle default open, when we touch this

button (Fig. 4-17) display will show OFF, anti-wrinkle closed,

and touch again display will show ON, anti-wrinkle open.

4.17 i-Refresh

A timer program, default time is 30 minutes. The longest

time is 50 minutes.

4-13

4-14

4-15

4-16

4-17

4-18

Childlock

Ba byc are Quic k Dry

Mix

Cotton

Duvet

Synthetics T owel Wa rm Up

Shirt

Wool Timer

Bu lkyDelic a te Sp orts

Wrink le Free

i-Refresh

5-Programmes

*) EN 61121 test program setting.

**) These programs have reversing function specially for big load.

Programme Drying

degree

Laundry Max. Load kg

8 9 10

Mix Extra dry Heavy fabrics, need further drying 5 6 7

Synthetics Extra dry Heavy synthetic 4 4,5 5

Towel **) Extra dry Towels 5 6 7

Duvet /

Feather clothing 1 1 1,5

Wool /Woolfell textiles 3 3 4

Warm up Extra dry Cashmere clothing 3 4 4,5

Timer /Heavy fabrics, need further drying - - -

Delicate Extra dry Underwear 2 2 3

Bulky **) Extra dry Heavy cotton 2 2 3

Shirt Extra dry Shirts 4 4,5 5

Sports Extra dry Sportswear 4 4,5 5

Babycare Extra dry Baby clothing 4 4 5

Quick Dry /Sheets 4 4 5

Cotton Extra dry Cotton, coats 8 9 10

EN 6-Consumption

Programme Drying

degree

Laundry Max. Load kg

8 9 10

Mix Extra dry Heavy fabrics, need further drying 5 6 7

Synthetics Extra dry Heavy synthetic 4 4,5 5

Towel **) Extra dry Towels 5 6 7

Duvet /

Feather clothing 1 1 1,5

Wool /Woolfell textiles 3 3 4

Warm up Extra dry Cashmere clothing 3 4 4,5

Timer /Heavy fabrics, need further drying - - -

Delicate Extra dry Underwear 2 2 3

Bulky **) Extra dry Heavy cotton 2 2 3

Shirt Extra dry Shirts 4 4,5 5

Sports Extra dry Sportswear 4 4,5 5

Babycare Extra dry Baby clothing 4 4 5

Quick Dry /Sheets 4 4 5

Cotton Extra dry Cotton, coats 8 9 10

Heat pump technology

The condensation dryer with heat exchanger is outstanding in terms of eﬃ cient energy

consumption. These are guide values determined under standard conditions. The values

may diﬀ er from those given, depending on overvoltage and undervoltage, the type of

fabric, composition of the laundry to be dried, the residual moisture in the fabric and the

size of the load.

Programme

Cotton / Linen

Spin speed

in rpm

Restidual

moisture

in %

Time

in h:min

Energy

consumption

in kWh

Extra Dry 1000 approx. 60 4:40 2.34

Ready to Store 1000 approx. 60 4:29 1.98

Ready to Iron 1000 approx. 60 3:18 1.62

Environmentally responsible use

▶Spin the laundry as dry as possible before putting it into the tumble dryer.

▶Avoid overloading the tumble dryer.

▶Shake the laundry loose before putting it into the tumble dryer.

▶Choose a proper drying program. Make sure the laundry is not dried longer than

needed.

▶Make sure to use the tumble dryer with cleaned ﬁ lters.

7-Suggestions and tips

7.1 Starched laundry

Starched laundry leaves a ﬁ lm of starch in the drum and is not suitable for the dryer.

7.2 Softener

Do not use softener when washing, because the laundry will become soft and ﬂ uﬀ y in the

dryer.

7.3 Soft care cloths

The use of “soft care cloths” can lead to a coating at the lint ﬁ lters. This can cause a block-

age of the ﬁ lters. In such cases, we recommend either to abstain from adding soft care

cloths or to choose a diﬀ erent brand. In any case note the manufacturer’s instructions.

7.4 Small amounts of ﬁ lling

In a quantity of less than 1.0 kg, the “Timer”-programme should be selected because the

automatic scanning of the dry level can be captured only still inaccurate.

7.5 Open door

The door should be left ajar during the non-use, so that the door seal indeﬁ nitely remains

in eﬀ ect.

7.6 Drum interior light

When the appliance is switched on, always the drum interior light lights when door is open .

7.7 Service ﬂ ap

Make sure that the service ﬂ ap is always closed during operation.

7.8 Anti crease protection

If at the end of the programme the laundry is not removed, the drum moves from time to

time to prevent creasing. The anti crease protection phase is approx. 60 minutes.

7.9 Laundry which should be ironed

...should be dried with level READY to IRON . This facilitates ironing by hand or using the

machine.

7.10 Remaining time

The programme duration is inﬂ uenced by the following factors: the type of fabric, the ﬁ lling

quantity, absorptive capacity, the desired dry level, as well as the spin speed of the washing

machine. These factors are registered by the electronics during the programme and the

remaining time will be corrected accordingly.

7.11 AUTO load detection system

When the programme starts, after a few minutes the display will show . This means

the automatic load detection is in progress. Sensors are detecting and estimating the se-

lected programme time to ﬁ nish. Depending on the programme selected, load quantity,

humidity and ambient temperature, the AUTO load detection phase can last a few minutes

for small load, or up to hour for the maximum load or large items, before displaying the ap-

proximate programme time remaining to ﬁ nish the programme.

EN 7-Suggestions and tips

7.12 Extra large pieces

... tend to wind up. If therefore the desired dry level could not be reached, loosen up the

laundry and dry again with the time programme (TIMER ).

7.13 Especially delicate fabrics

Textiles which can easily shrink or lose their shape, as well as e.g. silk stockings, lingerie etc.

should not be put in the dryer. Put delicate garments inside a laundry bag and avoid over

drying them.

7.14 Jersey and knitwear

should be dried at READY to IRON to avoid shrinkage. A subsequent stretch or pull into

form should be performed.

7.15 Fluﬀ

The amount of lint in the lint ﬁ lters is not attributable to the wash stress in the dryer; rather,

it is extracted ﬁ bres from the wearing and washing. During drying on the line, the ﬂ uﬀ will

be carried away by the wind. By using a tumble dryer the ﬂ uﬀ will be collected in the ﬁ lters.

7.16 Acoustic signal

An acoustic signal sounds:

▶when the water tank is full

▶in case of failures

Additionally the acoustic signal can also be selected for following cases:

▶at the end of programme

▶when pressing a button

▶when turning the programme selector

8-Daily use

8.2 Preparing the laundry

▶Sort clothes according to fabric

(cotton,synthetics, wool etc.).

Only dry laundry that has been spun.

▶Empty pockets of all sharp or ﬂ ammable objects

such as keys, lighters and matches. Remove

harder decorative objects such as brooches.

▶Close zippers and hooks, make sure the buttons

are sewn on tightly and place small items such as

socks, bras etc. in a wash bag.

▶Unfold large pieces of fabric such asbed sheets,

table cloth etc.

▶Follow the instructions on the laundry label and

dry only machine-dryable garments.

8.1 Preparing the appliance

1. Connect the appliance to a power supply (220V

to 240V~/50Hz) (Fig. 8-1) Please refer also to sec-

tion INSTALLATION.

2. Make sure:

▶the water tank is empty and properly installed.

(Fig. 8-2).

▶the lint ﬁlter is clean and properly installed. (Fig.

8-3).

▶the condenser ﬁlter is clean and properly

installed (Fig. 8-4).

Tips:

▶Separate white clothes from coloured ones.

▶Unfold large items such as bed sheets, table cloths, etc.

▶Bed linen and pillowcases should be button, so that small parts cannot collect inside.

▶Close zippers and hooks, and tie loose belts without metal parts, apron strings etc.

together.

▶Place small items such as socks, belts, bras, etc. in a wash bag.

▶Make sure all buttons are sewn on tightly .

▶Sew or remove loose metal parts of garments, such as e.g. metal buttons, bow of

bras before inserting. Otherwise such parts can cause noise and damage the drum.

▶Do not over-dry easy-care linen. Risk of the crease. Allow ﬁ nal drying at the air.

▶Knitwear (e.g. T-shirts, underwear) sometimes run up during drying. Only use dry level

READY to IRON and drag in the form afterwards.

▶For pre-dried, multi-layered garments or for ﬁ nal drying the time-programme

(TIMER ) should be chosen.

i-REFRESH

8-1

8-3 8-4

8-5

8-6

8-2

EN 8-Daily use

CAUTION!

Non-textile, as well as small, loose or sharp-edged items may cause malfunctions and

damage of clothes and appliance.

8.3 Loading the appliance

▶Loosen up and insert presorted laundry.

▶Don‘t overload.

▶Close the door carefully. Make sure that no pieces of laundry are pinched.

8.4 Removing and adding laundry

WARNING!

Never turn the dryer oﬀ before the end of the drying cycle unless all items are quickly

removed and spread out that the heat can be released.

To remove or add laundry the programme can be interrupted at any time:

▶Open the door. The cycle interrupts.

Be careful when removing or adding the laundry! The Interior of the drum or the laun-

dry itself may be hot, so that there is danger of burns .

▶To continue the programme, press the “Start/Pause” button after closing the door.

Load Reference

Bed sheet (single) Cotton Approx. 800 g

Blended fabric clothes / Approx. 800 g

Jackets Cotton Approx. 800 g

Jeans / Approx. 800 g

Overalls Cotton Approx. 950 g

Pyjamas / Approx. 200 g

Shirts / Approx. 300 g

Socks Blended fabrics Approx. 50 g

T-Shirts Cotton Approx. 300 g

Underwear Blended fabrics Approx. 70 g

8.5 Loading the dryer

1. Place the laundry evenly in the drum making sure

not to overload the dryer.

2. Switch on the tumble dryer by pressing the Power

button (Fig. 8-7).

8-7

8-Daily use

8.6 Set program and start

1. Turn the program knob (Fig. 8-8) to select the

desired program.

2. Set functions such as Temperature, Dry level, De-

lay. Afterwards press theStart/Pause button (Fig.

8-9) to start the dry cycle.

8.7 End of dry cycle

The tumble dryer stops operation automatically

when a dry cycle is complete. The display shows

END. Open the tumble dryer door and remove

the laundry. If the laundry is not removed the

anti-crease program starts automatically.

1. Switch oﬀ the tumble dryer by pressing the

Power button (Fig. 8-10).

2. Unplug the tumble dryer from the power socket

(Fig. 8-11).

3. Empty the water tank after each dry cycle (Fig.

8-12) .

4. Clean the lint ﬁ lter after each dry cycle (Fig. 8-13).

5. Clean the condenser ﬁ lter after each dry cycle

(Fig. 8-14).

Notice

Fabric softeners or similar products should be used as speciﬁ ed in the manufacturer’s

instructions.

CONTROL PANEL

Dry Le vel

Delay

Wrink le Free

Te mp.

Ba byca re Quic k Dry

Mix

Cott on

Duvet

Sy nthetic s To wel Wa rm Up

Shi rt

Wool T im er

Bulk yDelic ate Sp orts

Childl oc k i-Re fres h

i-REFRESH

ry Le vel

Delay

Wrink le F ree

Te mp.

Ba byca re Quick Dr y

Mix

Cotto n

Duvet

Synt hetics T owe l Warm U p

Shir t

Wool T ime r

Bulk y

Delic ate Spo rts

Childl ock i-Re fres h

8-8

8-9

8-10

8-11

8-12

8-13

8-14

Notice

▶During drying, please make sure the items are placed on the rack with no risk of en-

tangling the baﬄ es while the drum is rotating.

▶Maximum weight of wet items: 1.5 kg.

EN 8-Daily use

Care chart

Washing

Washable up to 95°C

normal process

Washable up to 60°C

normal process

Washable up to 60°C

mild process

Washable up to 40°C

normal process

Washable up to 40°C

mild process

Washable up to 40°C

very mild process

Washable up to 30°C

normal process

Washable up to 30°C

mild process

Washable up to 30°C

very mild process

Wash by hand

max. 40°C

Do not wash

Bleaching

Any bleaching allowed Only oxygen/

non -chlorine

Do not bleach

Drying

Tumble drying possible

normal temperature

Tumble drying possible

lower temperature

Do not tumble dryr

Line drying Flat drying

Ironing

Iron at a maximum

temperature

up to 200 °C

Iron at a medial tem-

perature

up to 150°C

Iron at a low temper-

ature up to 110 °C;

without steam (steam

ironing may cause irre-

versible damage)

Do not iron

8.8 Using the dryer rack

The dryer rack is designed for use with items

which are not recommended for tumble drying

such as trainers, sneakers, sweaters or delicate

lingerie.

1. Open the dryer door.

2. Check that the drum is empty.

3. Put the dryer rack into the drum.

4. Make sure the catches are inserted in the hole of

the lint ﬁ lter and locked in the hole of rear drum.

YER RACK

4. Make sure the catches are

Drum openings

Drum

Dryer rack

Lint ﬁlter

8-15

Notice

▶Do not use this dryer rack when there are other clothes in the dryer.

9-Care and cleaning

9.1 Lint ﬁ lter cleaning

Clean the lint ﬁ lter after each dry cycle.

1. Remove the lint ﬁ lter from the drum (Fig. 9-1).

2. Open up the lint ﬁ lter (Fig. 9-2).

3. Clean the lint ﬁ lter form any lint residuals (Fig. 9-3).

4. Reinstall the cleaned lint ﬁ lter in the tumble dryer

(Fig. 9-4).

9.2 Condenser ﬁ lter cleaning

Clean the lint ﬁ lter after each dry cycle.

1. Open the door.

2. Pull out the lint ﬁ lter from its housing (Fig. 9-5).

3. Pull out the condenser ﬁ lter from the air duct (Fig.

9-6).

4. Remove the sponge and clean the ﬁ lter screen

form any residuals (Fig. 9-7).

5. Reinstall the sponge to the condenser ﬁ lter (Fig.

9-8).

Notice

If the lint / the condenser ﬁ lter is very dirty, it can be cleaned under running water.

Let it dry thoroughly before use.

9-1

9-2

9-3

9-4

9-5

9-6

9-7

9-8

EN 9-Care and cleaning

9.3 Empty the water tank

During operation, steam condenses to water which is

collected in the water tank. Empty the water tank after

each drying cycle.

1. Pull out the water tank from its housing (Fig. 9-9).

2. Empty the water tank (Fig. 9-10).

3. Reinstall the water tank to the tumble dryer (Fig.

9-11).

Notice

Do not use the water for any kind of drinking or food processing.

i-REFRESH

ry Le vel

Delay

Wrink le F ree

Te mp.

Ba byca re Quick Dr y

Cotto n

Duvet

Synt hetics T owe l Warm U p

Shir t

Wool T ime r

Bulk y

elic ate Spor ts

Childl ock i-Re fres h

i-REFRESH

9-9

9-10

9-11

9.4 Tumble dryer

Wipe the outside of the tumble dryer and the control panel with a damp cloth. Do

not use any organic solvent or corrosive agent to avoid damage to the device.

9.5 Drum

After some operation time, fabric care agents or calcium contained in the water

can form an almost invisble ﬁ lm on the inside of the drum. Use a damp cloth and

some detergent to remove it. Do not use any organic solvent or corrosive agent

to avoid damage to the device.

9.5 Evaporator

If the evaporator behind the condenser ﬁ lter is dirty, it can be cleaned by use of

a vacuum cleaner. Make sure not to damage the evaporator while cleaning it.

10-Troubleshooting

Many occurring problems could be solved by yourself without speciﬁ c expertise. In case

of a problem please check all shown possibilities and follow below instructions before you

contact an after sales service. See CUSTOMER SERVICE.

WARNING!

▶Before maintenance, deactivate the appliance and disconnect the mains plug from

the mains socket.

▶Electrical equipment should be serviced only by qualiﬁ ed electrical experts, because

improper repairs can cause considerable consequential damages.

▶A damaged power cable should only be replaced by the manufacturer, its service

agent or similarly qualiﬁ ed persons in order to avoid a hazard.

Troubleshooting with display code

Code Cause Solution

 Drain pump error. Contact the customer service.





The condenser thermal sensor is open-circuited or

short-circuited.

Contact the customer service.

 Temperature of the laundry in the drum does not change. Contact the customer service.

 Communication failure between PCB and display. Contact the customer service.



Temperature is too low.

Use the dryer when air tem-

perature is higher than 5 °C.

Should the error codes reappear even after the taken measures, switch oﬀ the appliance,

disconnect the power supply and contact the customer service.

EN 10-Troubleshooting

Troubleshooting without display-codes

Problem Possible cause Possible solution

Tumble dryer

fails to operate.

• Poor connection to the power

supply.

• Power failure.

• No drying program is set.

• Device has not been switched

on.

• The water tank is full.

• The door is not closed properly.

• Check connection to the pow-

er supply.

• Check the power supply.

• Set a drying program.

• Switch the device on.

• Empty the water tank.

• Close the door properly.

Tumble dryer

fails to operate

and the display

shows .

• The laundry has reached the

dry level deﬁ ned by the pro-

gramme?

• There is no laundry in the drum?

• Check if the program setting

is appropriate.

• Check if there is laundry in the

drum.

Drying time is

too long and

the results are

not satisfactory

• The programme setting is not

correct.

• The ﬁ lter is clogged.

• The evaporator is blocked.

• The tumble dryer is overloaded.

• The laundry is too wet.

• The vent duct is blocked.

• Make sure the program is set

correctly.

• Clean the ﬁ lter screen.

• Clean the evaporator.

• Reduce the amount of laun-

dry.

• Spin the laundry properly be-

fore drying.

• Check the vent duct and unblock

it.

Remaining time-

on the display-

stops or skips.

The remaining time will be adjus-

ted continuously based upon the

following factors:

• Type of laundy.

• Loaded amount.

• Moisture degree of the laundry.

• Ambient temperature.

The automatic adjustment is a

normal operation.

11-Installation

11.1 Preparation

▶Remove all packaging material. While opening the package, water drops may be

seen. This normal phenomenon results from water tests in the factory.

▶Remove all packaging material including the polystyrene base.

Notice

Dispose of the packaging in an environmentally friendly manner. For information refer-

ring current disposal routes, consult your retailer or the local authorities.

11.4 Installation under worktop

The dimensions of the recess should at least agree

with the dimensions (Fig. 11-2).

1. Put the appliance adjacent to the slot. Make sure that

all connections are easily accessible and functional.

2. Adjust accurately all feet to get a ﬁ rm level position.

3. Install the appliance prudently into the recess.

4. Pay attention to suﬃ cient ventilation.

11.5 Electrical connection

Before each connection check if:

▶power supply, socket and fusing are appropriate

to the rating plate.

▶

the power socket is earthed and no multi-plug

or extension.

▶

the power plug and socket are strictly according.

▶

Only UK: The UK plug meets BS1363A standard

Put the plug into the socket. (Fig. 11-3).

WARNING!

If the supply cord is damaged, it must be replaced by the service agent (see warranty

card) in order to avoid a hazard!

WARNING!

Following transportation and installation, you MUST leave the dryer to stand for two

hours before use.

11.2 Transport and waiting time

Transport the appliance in horizontal position only. To the maintenance-free lubrication

oil is located in the capsule of the compressor. This oil can get through the closed pipe

system during slanting transport. Before connecting the appliance to the power supply

you have to wait 2 hours so that the oil runs back into the capsule.

11.3 Aligning the appliance

The appliance should be placed on a ﬂat and solid sur-

face. Set the feet to the desired level (Fig. 11-1).

11-1

11-2

11-3

EN 11-Installation

11.6 Reversing the door swing (Only for 8/9kg models)

▶Before you start, unplug the dryer from its electricaloutlet.

▶Handle parts carefully to avoid scratching paint.

▶Provide a non-scratching work surface for the doors.

▶Tools you will need: Phillips-head screwdriver.

▶Once you begin, do not move the cabinet until door-swing reversal is completed.

▶These instructions are for changing the hinges from the right side to the left side.

If you ever want to switch them back to the right side, follow these sameinstructions

and reverse all references to the left and right.

1. Remove the door assembly

Open the door. Remove the two screws holding the-

hinge/door assembly to the dryer. Carefully set the

hinge/door assembly aside (Fig. 11-4).

2. Remove, rotate and replacethe inner door

Remove the eight stickers and screws securing the

inner door to the outer door. Remove the inner door,

rotate it 180° and reinstall it into the outer door using

the same eight screws and stickers (Fig. 11-5).

3. Remove, rotate and replace the door lock & strike

plate

Remove the two screws holding the strike plate, and

then remove one screw of the door lock, push down

and take out the lock rotated 180° and install it on the

opposite side. the same eight screws and stickers (Fig.

11-6).

4. Rotate and replace the hinge/door assembly

Remove the two screws holding the strike plate, and

then remove one screw of the door lock, push down

and take out the lock rotated 180° and install it on the

opposite side. the same eight screws and stickers (Fig.

11-7).

11.7 Wash-dryer stack

The arrangement to a space saving wash-dryer stack

is possible (Fig. 11-8). Not every washing machine is

suitable for this purpose. Information, as well as the

corresponding mounting kit are available via your local

dealer.

The mounting instructions supplied with the kit care-

fully inform about the installation steps.

Hinge and Door

Assembly

Hold the Door and

Remove Hinge Screws

from the Dryer

Replace

the Door lock

and then

Reinstall

Strike Plate

and Screws

Strike Plate

and Screws

side.

1.Push

down

2.rotate an

angle then

can take

out

Secure with same

two screws

Remove eight

stickers and

screws

Remove the

Inner door and

rotated 180

as shown

Replace the

inner door with

eight screws and

stickers

screws and stickers.

11-4

11-5

11-6

11-7

11-8

12-Technical data

Productﬁ che (acc. to EU 392/2012)

Trade mark Haier

Model identiﬁ er HD90-A2979 HD100-A2979 HD80-A3979 HD90 A3979

HD90-A3979S

HD90-A3S979

Rated capacity (kg) 910 8 9

Kind of tumble drier Condenser

Energy eﬃ ciency class A++ A++ A+++ A+++

Weighted Annual Energy Consumption

(AE

in kWh/year

) 1) 236 280 175 193

Tumble dryer with or without automatic with automatic

Energy consumption of the standard cotton

programme 3) at full load (kWh/cycle) 1.98 2.29 1.43 1.58

Energy consumption of the standard cotton

programme 3) at partial load (kWh/cycle) 1.17 1.35 0.85 0.93

Power consumption of the oﬀ -mode (W) 0.1 0.1 0.1 0.1

Power consumption of the left-on mode (W) 1.19 1.19 1.19 1.19

Duration of the „left-on mode“ (min) 2) 40

Standard drying programme 3) Cotton

Weighted programme time of the stand-

ard drying programme 3) at full and partial

load (min)

208 220 215 243

Programme time of the standard cotton

programme 3) at full load (min) 269 280 273 298

Programme time of the standard cotton

programme 3) at partial load (min) 162 175 168 182

Condensation eﬃ ciency class 4) BB B B

Weighted condensation eﬃ ciency for the

standard cotton programme 3) at full and

partial load (%)

80 80 80 80

Average condensation eﬃ ciency of the

standard cotton programme 3) at full load 80 80 80 80

Average condensation eﬃ ciency of the

standard cotton programme 3) at partial

load

80 80 80 80

Weighted sound power level of the

standard cotton programme 3) at full load

(dB)

Built-in or freestanding Freestanding/ built under

EN 12-Technical data

Dimensions - HxDxW in mm 845 x 650 x 595

Power supply (refer to rating plate) - voltage / current / input 220-240 V~50 Hz/ 2.4A/

550 W

Permissible ambient temperature 5°C to 35°C

Fluorinated greenhouse gas

Volume

GWP

Tonne(s) of CO2 equivalent

HFC-134a

0.26 kg

1430

0.6

Additional data

1) Based on 160 drying cycles of the standard cotton programme at full and partial load, and the

consumption of the low-power modes. Actual energy consumption per cycle will depend on how

the appliance is used.

2) In case there is a power management system.

This programme used at full and partial load is the standard drying programme to which the infor-

mation in the label and the ﬁ che relates to. This is the programme suitable for drying normal wet

cotton laundry and it is the most eﬃ cient programme in terms of energy consumption for cotton.

4) Class G is the least eﬃ cient and Class A is the most eﬃ cient.

12-Technical data

Electric circuit diagram HD90-A2979:

Electric circuit diagram HD100-A2979:

NTC2

sensor

NTC3

sensor

Drain pump

Water switch

Display PCB

CN2-3

CN2-2

CN2-1

Motor

Power PCB

Heat pump

Door switch Humidity sensor

CN4-1

123456

Capacitor 12uf

Capacitor 8uf

4678 3 21

LNPE

Interference

suppressor

CN1

CN2

CN3

CN4

2 4 32

HD100-A2979:

CN2-2

CN4-3

CN4-5

CN2-1

CN4-4

Lamp

Touch film

CN1

CN3

CN9

CN3

CN7-1

CN2

123

12378123456

NK5-3 NK5-4

CN7-3

NTC2

sensor

NTC3

sensor Water switch

Door switch

Humidity sensor

Display PCB

Power PCB

Drain pump Motor

Heat pump

Capacitor 12uf Capacitor 8uf

Interference

suppressor

EN 12-Technical data

Electric circuit diagram HD80-A3979/HD90-A3979/HD90-A3979S/HD90-A3S979:

CN2-2

CN4-5

CN2-1

Lamp

Touch film

NK5-3 NK5-4

NTC2

sensor

NTC3

sensor Water switch

Door switch Humidity sensor

Display PCB

Power PCB

Drain pump Motor

Heat pump

Capacitor 12uf

Interference

suppressor

CN4-2

CN4-4

Flow valve

Spray module

CN4

CN1

CN3

CN9

CN8

CN3

123

CN2

123

123467812345667

CN6-1

CN6-2

CN6-3

Only for

HD90-A3S979

Only for

HD90-A3S979

13-Customer service

We recommend our Haier Customer Service and the use of original spare parts.

If you have a problem with your appliance, please ﬁ rst check section TROUBLESHOOTING.

If you cannot ﬁ nd a solution there, please contact

▶your local dealer or

▶the Service & Support area at www.haier.com where you can ﬁ nd telephone numbers

and FAQs and where you can activate the service claim.

To contact our Service, ensure that you have the following data available.

The information can be found on the rating plate.

Model ____________________ Serial No. _____________________

Also check the Warranty Card supplied with the product in case of warranty.

For general business enquiries please ﬁ nd below our addresses in Europe:

European Haier addresses

Country* Postal address Country* Postal address

Italy

Haier Europe Trading SRL

Via De Cristoforis, 12

21100 Verese

ITALY

France

Haier France SAS

53 Boulevard Ornano –

Pleyad 3

93200 Saint Denis

FRANCE

Spain

Portugal

Haier Iberia SL

Pg. Garcia Faria, 49-51

08019 Barcelona

SPAIN

Belgium-FR

Belgium-NL

Netherlands

Luxembourg

Haier Benelux SA

Anderlecht

Route de Lennik 451

BELGIUM

Germany

Austria

Haier Deutschland GmbH

Konrad-Zuse-Platz 6

81829 München

GERMANY

Poland

Czechia

Hungary

Greece

Romania

Russia

Haier Poland Sp. zo.o.

Al. Jerozolimskie 181B

02-222 Warszawa

POLAND

United

Kingdom

Haier Appliances UK Co.Ltd.

One Crown Square

Church Street East

Woking, Surrey, GU21 6HR

*For more information please refer to www.haier.com

European Haier addresses

Country* Postal address Country* Postal address

Italy

Haier Europe Trading SRL

Via De Cristoforis, 12

21100 Verese

ITALY

France

Haier France SAS

53 Boulevard Ornano –

Pleyad 3

93200 Saint Denis

FRANCE

Spain

Portugal

Haier Iberia SL

Pg. Garcia Faria, 49-51

08019 Barcelona

SPAIN

Belgium-FR

Belgium-NL

Netherlands

Luxembourg

Haier Benelux SA

Anderlecht

Route de Lennik 451

BELGIUM

Germany

Austria

Haier Deutschland GmbH

Konrad-Zuse-Platz 6

81829 München

GERMANY

Poland

Czechia

Hungary

Greece

Romania

Russia

Haier Poland Sp. zo.o.

Al. Jerozolimskie 181B

02-222 Warszawa

POLAND

United

Kingdom

Haier Appliances UK Co.Ltd.

One Crown Square

Church Street East

Woking, Surrey, GU21 6HR

HD90-A2979/HD100-A2979/HD80-A3979/HD90-A3979/HD90-A3979S/HD90-A3S979

Haier HD90-A3S979 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Haier HD90-A3S979

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info